- DL manuals
- Navini Networks
- Modem
- Ripwave
- User Manual
Navini Networks Ripwave User Manual - Connecting The
Navini Networks, Inc.
Ripwave MX Modem User Guide
Connecting the
S-EBP
The Indicator Light
on the S-EBP
The optional battery packs are not installed inside the Modem.
Instead they are connected to the Modem. To connect the S-EBP to
your Modem, plug the battery pack’s pig-tail cord into the input
socket located on the back of the Modem.
The S-EBP has one indicator light that resides on top of the unit.
This light has four states associated with it. The states are
described below.
Battery
LED
Battery
Charger
Connected
Modem
Connected
& Switched
On
Modem
On/Off
Button is
Lit
Comments
Green Yes
Not
applicable
Not
applicabl
e
Battery fully charged.
Amber Yes
Not
applicable
Not
applicabl
e
Battery charging.
Off
No
Yes
Yes
Normal. Battery is
supplying power to
Modem. No power is
wasted on the battery
LED.
Red
No
Yes
Yes
Battery is supplying
power to Modem. Battery
is low. 5% charge left.
1
Off
No
Yes
No
Battery is out of power.
Off
No
No
No
Battery LED is off. Status
of battery is unknown.
26
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Summary of Ripwave
Page 1
R r i i p p w w a a v v e e ™ ™ m m x x m m o o d d e e m m u u s s e e r r g g u u i i d d e e for use with all ripwave tm mx modem models part number 40-00382-00 revision b, version 1.0, pv1.6 february 10, 2006 proprietary all information disclosed by this document is the proprietary property of n...
Page 2: Table of Contents
Navini networks, inc. Ripwave mx modem user guide table of contents permissions, trademarks & distribution...................................................................................4 safety..........................................................................................................
Page 3
Navini networks, inc. Ripwave mx modem user guide care and maintenance................................................................................................................30 ..................................................................................................31 addendum 1: ri...
Page 4
Navini networks, inc. Ripwave mx modem user guide permissions, trademarks & distribution copyright © 2001 - 2006, navini networks, inc. All information contained herein and disclosed by this document is confidential and the proprietary property of navini networks, inc. And all rights therein are e c...
Page 5: Safety
Navini networks, inc. Ripwave mx modem user guide safety to optimize safety and expedite installation and service, read this document thoroughly. Follow all warnings, cautions, and instructions marked on the equipment and included in this document. To aid in the prevention of injury and damage to pr...
Page 6: B Tt
Navini networks, inc. Ripwave mx modem user guide or fire. Place the equipment on an unstable surface. It can fall and cause injury or damage to the nd nly when the equipment does not operate properly or shows a distinct change in performance. A ery caution & procedures warning! To reduce risk of in...
Page 7: Regulatory Information
Navini networks, inc. Ripwave mx modem user guide required to comply with fcc rf lmx modems except for the 2.6 lmx 20 cm) or more must be intained between the antenna and all persons during device operations to ensure compliance th th for the 2.6 lmx modem with a window unt, een the window mount te ...
Page 8: Introduction
Navini networks, inc. Ripwave mx modem user guide introduction the lmx) connect w package inve mod m congratulations! Your ripwave ™ mx modem (also referred to as is a user-friendly, easy-to-install device that helps you irelessly to the internet. It provides complete broadband internet access to re...
Page 9: Operating
Navini networks, inc. Ripwave mx modem user guide operating frequencies inimum omputing equirements ee, also, addendum 1) m c r (s modem model frequency range operating band 2.3 ghz lmx 2305-2360 lmx e 2.305 ghz – 2.360 ghz wcs 2.4 ghz lmx 2400-2483 lmx e 2.400 ghz – 2.483 ghz ism 2.5–2.6 ghz lmx 2....
Page 10: Hysical
Navini networks, inc. Ripwave mx modem user guide navini networks, inc. Ripwave mx modem user guide 10 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) hysical characteristics the following figure shows the physical characteristics of the modem. Lmx modems (2.3, 2.4, 2.5-2.6, 3.4, & 3.5 ...
Page 11: The
Navini networks, inc. Ripwave mx modem user guide 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) the ee, also, addendum 1) the f instruc plain ur m please read all instructions before installing the modem. Also, turn o er an em m . Note: e mo ld i interference with other equipment when...
Page 12
Navini networks, inc. Ripwave mx modem user guide 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) odem, installing the m continued step action illustration 4. Rotate the modem’s antenna clockwise 180° when the antenna is in the up position, the modem’s liquid crystal display (lcd) can b...
Page 13: Accessing The
Navini networks, inc. Ripwave mx modem user guide accessing the internet troubleshooting he liquid crystal isplay (lcd) to ccess the internet, open the web browser that is installed on your equirements and addendum 1 . Ensure your computer meets those e lso review the ins dures and ensure the roperl...
Page 14
Navini networks, inc. Ripwave mx modem user guide the lcd, continued lcd indicators: 1 the modem is syncing with a bts. Searching: blinking flash: 2 modem has locked-on to a bts. Connected: the 3 c activity activity indicator: both arrows flashing: there is traffic activity. Blank: there is no traff...
Page 15: Installing Navi
Navini networks, inc. Ripwave mx modem user guide installing navi diagnosti ni cs navdiag) lems note: to install navdiag on a windows 2000, you must have dministrative privileges. To check your account privileges, open . N u have a windows 98, xp, r me operating system, the screens you see may vary ...
Page 16
Navini networks, inc. Ripwave mx modem user guide 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) ontinued installing navdiag, c step action illustration 5. The installanywhere w p that installanywhere has in indow appears. The rogress bar indicates itialized. 6. T vini diagno language ...
Page 17
Navini networks, inc. Ripwave mx modem user guide installing navdiag, continued 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) step action illustration 9. The license agreement screen appears. Read the licensing agreement. Select the i accept agreement is not option, and click next to ...
Page 18: Troubleshooting
Navini networks, inc. Ripwave mx modem user guide installing navdiag, continued troubleshooting sing navini iagnostics navdiag) u d ( step action illustration 13. The installing screen displays as the application files are loaded. 14. Ll complete screen, click done to close the window. Windows 2000 ...
Page 19: The Icons
Navini networks, inc. Ripwave mx modem user guide the icons the signal trength and ignal quality bars ppear on the top r e screen represent pc the pc and the modem, the modem the modem and the base station, and the base station to which the modem is communicating. Check ections indicate working conn...
Page 20: How to Increase
Navini networks, inc. Ripwave mx modem user guide navini networks, inc. Ripwave mx modem user guide 20 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) the si signal quality bars, continued how to increase the strength and quality of the signal the history graphs articular, the signal st...
Page 21: He Configuration
Navini networks, inc. Ripwave mx modem user guide 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) s he configuration creen f the connection s are four parameters. E , network id, active sw ersion, and st on. The bts id indicates the bts to which the modem is currently synchronized. The ...
Page 22: He Trend Analysis
Navini networks, inc. Ripwave mx modem user guide 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) on screen, he trend analysis creen r default, this box is checked which means the service provider can monitor your modem. The trend analysis screen lets you view how some modem parameters ...
Page 23: The Statistics
Navini networks, inc. Ripwave mx modem user guide the statistics he about screen he statistics screen lets you view the current value of selected he about screen provides vital information such as the version of e navini diagnostics software currently installed on your mber help button appears on th...
Page 24: Ninstalling
Navini networks, inc. Ripwave mx modem user guide 060210_pv1.6_rip 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) navini networks, inc. Ripwave mx modem user guide 24 wave-mx modem user guide_40-00382-00b(4.4.2) ninstalling navini diagnostics (navdiag) if for some reason you need to un...
Page 25: Ptional Battery
Navini networks, inc. Ripwave mx modem user guide uninstalling navdiag, ontinued c ptional battery o packs step action illustration 4. The uninstall complete screen appears when finished. Click on quit to close the uninstall screen. Windows 2000 screen 5. Restart the pc to complete the uninstall pro...
Page 26: Connecting The
Navini networks, inc. Ripwave mx modem user guide connecting the s-ebp the indicator light on the s-ebp the optional battery packs are not installed inside the modem. Instead they are connected to the modem. To connect the s-ebp to your modem, plug the battery pack’s pig-tail cord into the input soc...
Page 27: G The
Navini networks, inc. Ripwave mx modem user guide the indicator light on the s-ebp, continued g the -ebp for pens e ll shut rge state. Recharging the battery will store it to its normal healthy state. Ng the battery has no power) or is red ndicating the battery level is low). O recharge the s-ebp, u...
Page 28: Connecting An
Navini networks, inc. Ripwave mx modem user guide connecting an disconn d ecting the d-ebp h if you have a hd-ebp, the battery pack is installed in the bottom of the modem. To install and or remove the battery pack, follow the steps below. Step action illustration 1. Depress the front button on the ...
Page 29: He Indicator Light
Navini networks, inc. Ripwave mx modem user guide 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) ntinued he indicator light n the hd-ebp connecting and disconnecting the hd-ebp, co t o step action illustration 6. Plug the battery pack’s pig-tail cord into the power slot on the modem. 7...
Page 30: Charging The
Navini networks, inc. Ripwave mx modem user guide charging the hd-ebp are and aintenance eeds to be recharg attery is connected m ur ed on but the led on the back of the dicating the battery has no power) or is red (indicating the battery level is low). To recharge the battery pack, use only the 12v...
Page 31: Upgrading The
Navini networks, inc. Ripwave mx modem user guide care & maintenance, 060210_pv1.6_ripwave-mx modem user guide_40-00382-00b(4.4.2) if there is a problem with the modem, do not attempt to repair it yourself. Report the problem to your service provider. If you are going to upgrade your operating syste...
Page 32
Navini networks, inc. Ripwave mx modem user guide must already have an ip address. If your computer does not have an ip address, contact your service provider. If you attempt to upgrade your modem software through the navini diagnostics tool and the computer does not have an assigned ip address, you...
Page 33: Addendum Ripwave
Navini networks, inc. Ripwave mx modem user guide 33 33 1: -mx modem - pc troubleshooting - for use with all a d ostics software - c operating systems rior to installing the navini diagno k to insure that the pc operating system eets the criteria given in the table below. If these criteria are not m...
Page 34
Navini networks, inc. Ripwave mx modem user guide 34 34 mx mon r no software will work if it goes through a onfiguration options esults of correct navini iagnostics installation xperienced pc users can c e f th dia ins looking at e log file that is created d the ion e is named navini_diagnostics_ins...
Page 35
Navini networks, inc. Ripwave mx modem user guide action notes: none. Install log detail: heck disk space: c:\program status: successf additional notes: n stall directory: c:\program f status: successf et registry entry: key: hkey_local_machine\softwareavini networksavdiag, valuename: stalldirec...
Page 36
Navini networks, inc. Ripwave mx modem user guide make registry entry: key: e\soft lue name: navini di status: successful ake registry entry: key: key_local_machine\soft e name: ninstallstring, value data: "c:\progra status: successf l stall uninstaller: navini diagn status: successful reate launcha...
Page 37
Navini networks, inc. Ripwave mx modem user guide install directory: c:\program f status: successf stall file: c:\program file status: successf stall file: c:\program filesavdiag\data\libavdiag.Jar status: successf l stall file: c:\program filesavdiag\data\lib\jfreechart-0.9.13.Jar status: suc...
Page 38
Navini networks, inc. Ripwave mx modem user guide addendum 2: end user software license agreement between and buyer age 1.1 navini networks, inc. Article 1 important mess act of assent. Inst license agreemen alling the s t you have re erstand and accept this t. Le 2 ses 2 t of license oftware indica...
Page 39
Navini networks, inc. Ripwave mx modem user guide 2.5 suitability. R installing and operating the software, and for the results obtained. Accordingly, each buyer should determine its needs, and evaluate the software’s capabilities before making ion about licensing the software. B. Navini networks, i...
Page 40
Navini networks, inc. Ripwave mx modem user guide article 4 indemnifications and warranty .1 intellectual property indemnification; entire liability 4 . Article 15 of the supply greement is attached states the entire ghts by the licensed software, any parts thereof, and navini networks, inc. Shall h...
Page 41
Navini networks, inc. Ripwave mx modem user guide article 6 ct code only-no modifications obje 6.1 modifications. In o licensed software, navini networks, inc. Provides the software in object-code form only. Buyer shall not modify, enhance, adapt, disassemble, translate, decompile or rder to maintai...