Navitar DocumentPro A-20 User Manual - page 8
System Diagrams
Controls
1. Camera: The camera can be tilted upwards as much
as 90 degrees so it can also be used as a room
camera for videoconferencing.
2. Lens: A close-up lens is attached to the bottom of
the camera. To detach, pull the knob of the close-up
lens.
3. Arm light: When the power is on, the arm light
automatically turns on.
4. Stage: Place an object or document on this for
viewing.
5. Zoom control: For zooming in or out on a document
or object while viewing the image on a monitor or
screen.
6. Iris controls: These are step up and step down
controls. Tap the button repeatedly to adjust
brightness up or down.
7. Image memory switch: This can be used to capture
a frame and freeze view it.
8. Power switch: On/off.
9. AC inlet: Connects the product to a power supply
with the AC adapter.
10. S-Video output terminal: You can use this if your
monitor has an S-Video input terminal to produce a
higher quality image.
11. Composite Video output terminal: This
connector supplies a Composite Video signal to
a color monitor, projector or VCR.
12. RS-232 output connector
8