Navitel G550 User Manual - page 29
29 |
USER MANUAL
EN
Using the device
1. Power supply and charging
1.1 Power supply
There are three types of power supply: battery, adapter, USB cable. The GPS navigator uses its built-in Lithium battery when it is
not connected to an external power supply via the adapter; external power when it is connected to motorcycle or car; the USB
cable to charge when connected to a PC.
The
icon in the upper right corner of the screen indicates the current battery charge.
Note
: this device uses built-in, unchangeable Lithium battery. Battery time may vary, depending on which functions are used. For example, bright
backlight will consume more energy, which will reduce battery time.
To avoid fire or explosion, please do not poke, bump or take the battery apart, and do not throw it into burning fire, or water.
1.2 Using the charger
Connect the red and black wires to the motorcycle’s electrical system. Connect the other part to the charging port of the device.
When you start the motorcycle, the GPS navigator will turn on automatically.
2. Power on/off
2.1 Power on
Please, make sure that the battery has enough charge or is connected to an external power source.
Note
: when travelling, keep in mind that the device needs time to adapt to a different environment before you turn it on. Sudden increase or decrease in
humidity may cause the mainframe to short circuit.
2.2 Power off
Press the button at the top of the device to turn it off; the device will enter power saving mode. When turned on again, it will restore
its last state.