Navman B2-Series User Manual - Basic Functions
B2 User Manual | Basic functions
8
Basic functions
Note:
The use of voice recognition, redial and changing calls between the B2 and your phone or PDA, depend
on the model of phone or PDA you are using.
Making a call manually
Enter the number using your phone or PDA, then start the call.
The call will automatically change to hands-free mode using the B2.
Note:
If the call does not change to the B2, press
.
Making a call using voice recognition
Before you can make a call using voice recognition, you must have first recorded the correct keywords (see
"Voice recognition" on page 11) and added at least one contact to the B2.
1.
Press
.
2.
After the beep, clearly say the name of the person you want to call.
3.
If the contact has more than one number assigned to it, clearly say the category of the number after the
second beep, for example, "home", "work", "cellular", etc.
The B2 will place the call via your phone or PDA.
Receiving a call
When an incoming call is received on the B2, you will hear a ringtone and see the
and
buttons flash.
Note:
Some versions of the Navman F-Series models may display Caller ID information on-screen when a call
is received.
Press
to answer the call.
Press
to reject the call.
Using call-waiting
When an incoming call is received while you are already on a call, you will hear a ringtone and see the
and
buttons flashing.
Press
to change to the incoming call. Press
again to change between calls.
Press
to reject the incoming call.