Navman FUEL 2100 Installation And Operation Manual

Summary of FUEL 2100

  • Page 1

    Navman installation and operation manual w w w .Navman.Com fu el 2100 english ............. 3 français ......... 11 español .......... 19 deutsch .......... 27 nederlands .... 35 svenska ......... 43 suomi ............. 51.

  • Page 2

    Fuel 2100 installation and operation manual navman 2 fcc statement note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a...

  • Page 3: Contents

    3 fuel 2100 installation and operation manual navman contents 1 operation ......................................................................................................... 4 fuel flow ...............................................................................................................

  • Page 4: 1 Operation

    Fuel 2100 installation and operation manual navman 4 fuel flow press the key to display the current fuel flow rate. Total flow ^ v other fuel functions press the key to cycle through the possible functions. Each time the key is pressed the display will show an identifier for 2 seconds before the val...

  • Page 5

    5 fuel 2100 installation and operation manual navman setting the low fuel alarm use the key to select the alarm function. The lcd will indicate alr for two seconds and will then display the present alarm value. If no alarm value has been entered the lcd will indicate 0ff . Total flow ^ v alr 0 12 0f...

  • Page 6: 2 Instrument Setup

    Fuel 2100 installation and operation manual navman 6 selecting units of measure the fuel 2100 will indicate fuel values in litres, imperial gallons or us gallons. To change the current setting perform the following steps: 1. Power up the unit while holding down the key. Total flow ^ v hold down duri...

  • Page 7: Warning

    7 fuel 2100 installation and operation manual navman mounting the instrument panel must be 3mm to 19mm ( 1 / 8 " to 3 / 4 ") in thickness. • drill a 51mm (2") hole in the instrument panel. • remove brackets and insert the instrument so the back is flush with the instrument panel. • slide the bracket...

  • Page 8

    Fuel 2100 installation and operation manual navman 8 wiring connection • keep electrical and transducer cables away from alternator or other noise generating electrical cables. Avoid connecting the instrument to power circuits that share loads with ignition, alternators, inverters and radio transmit...

  • Page 9

    9 fuel 2100 installation and operation manual navman • size mount 51mm diameter hole depth behind face plate 95mm max. Display 3-character lcd • colour black with texture on bezel. • backlighting red coloured diffused lighting for display. • water integrity front will withstand direct water spray. •...

  • Page 10

    Fuel 2100 installation and operation manual navman 10 no display: 1. Check dc power connections and dc polarity with voltmeter. 2. Check fuse. No flow reading indicated: 1. Check connection to flow transducer. 2. Remove transducer from fuel line, blow through transducer, a whistling noise will indic...

  • Page 11: Www.Navman.Com

    North america navman usa inc. 18 pine st. Ext. Nashua, nh 03060. Ph: +1 603 577 9600 e-mail: sales@navmanusa.Com oceania new zealand absolute marine ltd. Unit b, 138 harris road, east tamaki, auckland. Ph: +64 9 273 9273 e-mail: navman@absolutemarine.Co.Nz papua new guinea lohberger engineering lawe...

  • Page 12: Fuel 2100

    Lon 174° 44.535’e lat 36° 48.404’s made in new zealand mn000207a fuel 2100 navman.