Navman S300 Settings Manual

Other manuals for S300: Specification, User Manual

Manual is about: 300 series GPS Sport.Tools

Page of 10

Download

Print this page

Bookmark us

S300

Setting options

NAVMAN

Press and hold to enter setup

Press repeatedly to step through the setting options.

Press both buttons toghether (

) to start or stop

editing a setting option.

While editing, press or repeatedly to step through selectable states,

or increase/decrease values. Press and hold the appropriate button to

increase/decrease values quickly.

Set (12hr)

lets you set 12hr or 24hr time format

Set (31-12)

lets you set dd-mm or mm-dd date format

Beep

When beep is «ON» a beep will sound when the buttons

are pushed.

Set units (km/h)

lets you set speed units to «km/h» or «mph»

Distance is displayed in units corresponding to the speed units, i.e. if you

choose «km/h» for speed units, then distance is displayed in «km».

Set offset

lets you adjust the S300 to display local time

The date is displayed to ensure that time adjustments are made in the

correct direction, i.e. both correct time and correct date should be

displayed. GPS signals must be obtained to set local time.

Press and hold to leave setup

S300 — Settings

1 2 3 4 5 6 7 Next › »

Summary of S300

Page 1
S300 setting options navman press and hold to enter setup press repeatedly to step through the setting options. Press both buttons toghether ( ) to start or stop editing a setting option. While editing, press or repeatedly to step through selectable states, or increase/decrease values. Press and hol...
Page 2
S300 use the settings navman s300 — settings key = press this button = press this button = press both buttons together settings editing details beep beep beep on beep off set units (km/h) set units (mph) set units (km/h) set offset set 12hr set 31-12 set 24hr set 12-31 set units (km/h) set (12hr) se...
Page 3
S300 normal operating modes press to start normal operation press repeatedly to step through the modes (hold to cycle automatically through modes). Speed shows session distance and current speed speed (avg) shows session distance and average speed speed (max) shows session distance and maximum speed...
Page 4
S300 use the modes * key = press this button = press this button = press both buttons together = press and hold both buttons together navman s300 — modes modes operating details zone off zone max zone min zone off zone min zone off zone on zone on zone max speed (avg) speed (max) speed clock timer o...
Page 5
Quick start guide.
Page 6
S300 now you know..
Page 7
S300 be outdoors the s300 is not intended for operation indoors or under water as it uses global positioning system (gps) satellites to get time and date information, and to calculate distance and speed. For best results, always use the s300 outdoors with an unobstructed view of the sky. L 1. Turn d...
Page 8
S300 the control buttons, and (as shown above) are pressed separately or together to turn the unit «on» and «off», cycle through modes, and select mode options. Know the buttons get set step 2 ! Always enter setup ﬁrst if you wish to change settings. To enter setup after starting normal operation, y...
Page 9
S300 start normal operation press to start normal operation when starting directly into normal operation s300 will start in the mode it was in at last shutdown. The s300 automatically operates whenever you are moving and pauses operation while you are stationary. Modes are accessed in the following ...