Navman TM 550 User Manual - page 10
10
TM 550 | User Manual
Step Three: Connect the TM 550 to your iCN 550
1. Plug the USB Cable into the USB Socket of your iCN 550.
2. Plug the Power Jack into the Power Socket of your iCN 550.
Step Four: Connect the TM 550 to the Power Supply
1. Connect the TM 550 Power Connection to your iCN 550’s Power Cable.
2. Plug the iCN 550 12V DC Power Adaptor into the vehicle power socket.
Your TM 550 is Drive-Away. It begins working as soon as you set it up. When you turn on your iCN 550, the Traffic option on the Main Menu
screen will be enabled.
Tap Traffic to display the Traffic Status screen. See page 11 for more information.
NOTE: If you disconnect the TM 550 from your iCN 550, the Traffic button will remain enabled.
• To disable this button, you must restart your iCN 550.
• To begin receiving RDS-TMC messages again, reconnect your TM 550 to your device and a power supply.
NOTE: The TM 550 will only work when it is connected to a power supply.
TM550_UM_UK.indd 10
23/08/2005 12:55:49 p.m.