Navman WIND 3100 Installation and operation manual - 3 Wind Direction

Manual is about: Navman WIND 3100 for measuring wind speed and wind angle

Summary of WIND 3100

  • Page 1

    1 wind 3100 installation and operation manual navman 1 wind 3100 installation and operation manual navman installation and operation manual w w w .Navman.Com wind 3100 navman english ............. 2 français ......... 17 español .......... 32 português ...... 47 chinese .......... 62.

  • Page 2

    2 navman wind 3100 installation and operation manual fcc statement note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a...

  • Page 3: Contents

    3 wind 3100 installation and operation manual navman units the factory default units are knots. To change these units, please refer to section 4-1 of this manual. Contents 1 introduction ..................................................................................................... 4 2 operati...

  • Page 4: 1 Introduction

    4 navman wind 3100 installation and operation manual the wind 3100 displays: apparent wind direction and wind speed. True wind direction and wind speed (requires data from a speed instrument). Maximum wind speed. Steering directions to sail at a constant angle to the wind (steer to wind). Vmg, the c...

  • Page 5: 2 Operation

    5 wind 3100 installation and operation manual navman 2 operation 2-1 turn on and off turn the unit on and off with the auxiliary power switch on the boat. The unit does not have its own power switch. When you turn it off, any settings you have made are retained. If the word sim flashes at the top, r...

  • Page 6

    6 navman wind 3100 installation and operation manual hold 2 sec + hold hold + 5 sec hold 2 sec increase value or change setting decrease value or change setting turn simulate on or off reset memory change wind speed units (m/s or knots) adjust backlight (4 levels or off) change speed display (wind s...

  • Page 7

    7 wind 3100 installation and operation manual navman apparent wind speed and direction are the values measured by the mast head unit on the boat. True wind speed and direction are calculated values that allow for boat speed. If the boat is moving , then the apparent wind speed is different to the tr...

  • Page 8: 3 Wind Direction

    8 navman wind 3100 installation and operation manual 3 wind direction 3-1 wind direction display to display wind direction, press one or more times, until true (true wind direction) or app (apparent wind direction) is displayed. True wind direction is only displayed if the wind 3100 is connected to ...

  • Page 9: 4 Wind Speed, Vmg

    9 wind 3100 installation and operation manual navman 1 press + to display the wind direction damping screen: 2 press or to change the damping. 3 press . 3-4 calibrate wind alignment you will need to calibrate the wind alignment if you believe that the displayed wind direction is inaccurate or, at in...

  • Page 10: 5 Steer to Wind

    10 navman wind 3100 installation and operation manual 5 steer to wind the required steering angle is 40° and the boat is at 30° to the apparent wind. The steering error is 10°. The boat should turn 10° to port. The steering resolution is 1° and so 10 segments of the circular display are on: the stee...

  • Page 11

    11 wind 3100 installation and operation manual navman 5-1 set required steering angle the required steering angle is the required angle between the boat direction and the apparent wind direction: 1 while steering to wind, press + ; the required steering angle flashes: 2 press or to change the requir...

  • Page 12: 7 Wind 3100 Hardware

    12 navman wind 3100 installation and operation manual 7 wind 3100 hardware standard configuration: wind 3100 unit with protective cover. Masthead unit. 30 m masthead cable. Masthead cable junction box. Warranty card. Mounting template. This installation and operation manual. 7-2 other parts required...

  • Page 13: 8 Installation and Setup

    13 wind 3100 installation and operation manual navman correct installation is critical to the performance of the unit. It is vital to read this section of the manual and the documentation that comes with the other parts before starting installation. The wind 3100 can: drive external beepers or light...

  • Page 14

    14 navman wind 3100 installation and operation manual box needs to be. Allow extra length for terminating the cable in the junction box. Cut the masthead cable to this length from the mounting block. Do not throw away the other piece of cable. 5 lead the bare end of the masthead cable into the hole ...

  • Page 15

    15 wind 3100 installation and operation manual navman power/data cables junction box junction box power & data connections power/data cable navbus cable group 1 group 2 power & data connections mode is or wind speed units ................................ Knots pointer type .............................

  • Page 16: Appendix B - Troubleshooting

    16 navman wind 3100 installation and operation manual physical case size 111 mm (4.4") square. Lcd display 82 mm (3.2") wide, 61 mm (2.4") high; twisted nematic. Lcd digits 30 mm (1.2") high on top line, 20 mm (0.8") high on bottom line. Four operator keys, laser etched. Backlighting for display and...

  • Page 17: Www.Navman.Com

    79 wind 3100 installation and operation manual navman north america navman usa inc. 18 pine st. Ext. Nashua, nh 03060. Ph: +1 603 577 9600 fax: +1 603 577 4577 e-mail: sales@navmanusa.Com oceania new zealand absolute marine ltd. Unit b, 138 harris road, east tamaki, auckland. Ph: +64 9 273 9273 fax:...

  • Page 18: Wind 3100

    80 navman wind 3100 installation and operation manual 20 navman wind 3100 installation and operation manual lon 174° 44.535’e lat 36° 48.404’s made in new zealand mn000134 1951320b wind 3100 navman.