Summary of TZtouch2 TZT12F
Page 1
1 system overview.
Page 2: Index
2 1. Navnet tztouch2 1-1 model tzt12f and tztl15f 1-2 total control, simply refined… 2. Product overview 2-1 appearance 2-2 specifications 2-3 comparison with navnet tztouch 3. Operating navnet tztouch2 3-1 multi touch control 3-2 edge swipe for display layers 3-3 edge-swipe for quick page access 3-...
Page 3: 1. Navnet Tztouch2
3 1. Navnet tztouch2 1-1 model tzt12f and tztl15f navnet tztouch2, the second generation of navnet tztouch series, has two (2) models: tztl12f (12.1”-diag) and tztl15f (15.6”-diag). This document describes the overview of these new models. 1-2 total control, simply refined… “total control, simply re...
Page 4
4 built-in rezboost™ fish finder rezboost™ is a revolutionary new technology built-in to tzt2, to produce high-definition fish finder echo resolution and separation. By utilizing conventional narrowband transducers, echo images will be up to 8x sharper, thanks to advanced post signal processing. It ...
Page 5: 2. Product Overview
5 2. Product overview 2-1 appearance the tztl12f/15f mfds provide a large screen for their bezel size, thanks to minimized hardware keys. The rear side is slimmer, lighter and much more water-resistant than any other furuno mfd! The glass face is impervious to water! Front view no items descriptions...
Page 6
6 2-2 specifications (1) options – new no fusa p/n model descriptions/remarks 1 sdu001 sdu-001 microsd card reader 2 001-337-410-00 op19-13 bracket for tztl12f 3 001-337-420-00 op19-14 bracket for tztl15f 4 001-337-430-00 op19-15 *(1) adapter panel for retrofit from gd1920c to tztl12f it can be used...
Page 7
7 protection level ip56 (both front and rear sides) power/consumption 12-24 vdc (3.0-1.5 a), 36 w 12-24 vdc (3.6-1.8 a), 43.2 w notes: (1) the tztl12f/15f reads mapmedia charts in mm3d format copied to a microsd card or usb memory. Unlocking procedures are the same as tztouch via unlocking codes or ...
Page 8
8 operator’s manual user guide (eguide) built-in (html) compatible apps *(1) navnet viewer navnet controller note: (1) the tztl12f/15f is not compatible with the navnet remote app. 2-3 comparison with navnet tztouch general tztl12f/15f tzt9/14/bb lcd size 12.1”-wide / 15.6”-wide 9”-wide / 14.1”-wide...
Page 9
9 contact closure operator fitness output n/a buzzer output 1 port for external buzzer 1 port for external buzzer power output for drs no port (psu-017/012/013 necessary) no port (psu-017/012/013 necessary) card slot 1 slot at the rear side for microsdxc 2 slots for sdxc *(1) among two (2) video inp...
Page 10
10 3. Operating navnet tztouch2 the tztl12/15f user interface is similar to the navnet tzt9/14/bb but has refined operational features. This section provides an overview of the key operational differences. 3-1 multi touch control the tztl12f/15f can be controlled by multi touch operation. In additio...
Page 11
11 3-5 more information by eguide a built-in operation guide is available on the tztl12f/15f screen to help answer questions on basic features and operation. 4. Utilizing wireless solution the tztl12f/15f with built-in wireless lan offers multiple features and solutions. 4-1 navnet viewer and navnet...
Page 12
12 4-2 internet – weather and software download connected to the internet, tzt2 mfds have unlimited free access to an incredible weather download service just like the tzt9/14/bb. Weather forecast up to 16 days is available from navcenter and can be displayed on the dedicated weather page of the tzt...
Page 13
13 5. Installing navnet tztouch2 5-1 dimensions tztl12f – flush mount from rear side (standard) tztl12f – bracket mount (option: op19-13 / p/n 001-337-410-00) tztl15f – flush mount from rear side (standard).
Page 14
14 tztl15f – bracket mount (option: op19-14 / p/n 001-337-420-00) sdu001 (option).
Page 15
15 5-2 replacement from navnet vx2 – front mounting for model tztl12f 10.4” nn1/vx2 display to tztl12f with op05-15 (001-337-430-00) a 10.4” nn1/vx2 display has a larger cutout hole than a tztl12f. The adapter panel op05-15 (part # 001-337-430-00) helps to fill the hole and install the tztl12f from ...
Page 16
16 5-3 replacing a navnet 3d mfd12 – front mounting for model tztl12f mfd12 to tztl12f with op05-16 (001-337-440-00) the mfd12 has a larger cutout hole than a tztl12f. The adapter panel op05-16 (part # 001-337-440-00) helps to fill the hole and install the tztl12f from the front side. While both op0...
Page 17
17 5-4 front mounting for model tztl15f the op19-17 (part number 001-337-450-00) can be used to mount the tztl15f from the front side..
Page 18
18 5-5 pigtail cables pigtail 1 shown at left is packaged by most frequently used cables, while pigtail 2 is mainly for optional interconnections. Each cable is labeled with its port name. You can easily find an appropriate port on the pigtail cables. No label remarks 1 network for ethernet sensors ...
Page 19
19 6. Networking navnet tztouch2 6-1 compatible sensors network sensors remarks ethernet drs series, dff1-uhd, dff1/3, bbds1, fa30/50, fax30 not compatible with bbff1/bbff3 no ethernet network with far2xx7/fcv1150 nmea2000 (see remarks) refer to input/output pgn specifications. Nmea0183 (see remarks...
Page 20
20 6-4 utilizing model sdu001 and mcu002 via the usb port or the microsd reader sdu001 and remote controller mcu002 can be connected via usb. Notes: (1) when both sdu001 and mcu002 are used, arrange a usb hub locally. (2) use one (1) sdu001 and mcu002 per display. 6-5 utilizing an external monitor t...
Page 21
21 note: among two (2) analog camera inputs, the tztl12f/15f can assign one camera screen per display. Two (2) camera images cannot be simultaneously shown on both quarter (1/4) screens as shown at right. To see each camera image, switch sources between each source on one camera screen as shown at l...
Page 22
22 6-9 retrofit from navnet 3d retrofit to tztl12f/15f original – mfd8/12 (navnet 3d) in this example, the mfd8/12 units are replaced with tztl12f/15f. While the tztl12f/15f can use the same ethernet sensors as the mfd8/12/bb, the following changes are necessary to cope with more redundant ethernet ...
Page 23
23 6-11 integrated network with navnet tztouch the ethernet and nmea2000 network architecture of tztl12f/15f is the same as tzt9/14/bb. You will still need to network both displays via ethernet and nmea2000. Notes: (1) points and routes are shared automatically on the network. (2) setting of tztl12f...