NavRoad MOTO 2 User Manual - page 98
At startup a screen
with a cross appears
Calibration required
Perform touch screen calibration
The unit slightly heats
up
This is normal during operation
and during charging.
The unit is suspended
Faulty file or wrong operation
Press and hold the “POWER”
button during 5-10 sec. to turn
the device off, then turn on the
device again.
The device can not be
charged either restarts
Wrong power supply
Make sure you use correct car or
AC charger. It’s impossible to
charge your device from PC.
Charger is not charging, no charging indicator
on the charger
Check if the charger is connected
properly. Check the fuse in the
charger, check the fuse in your
car.
The device is unstable
Damaged system files or navigation software
files
Reinstall the firmware
downloaded from
www.navroad.com (DOWNLOAD).
Read the upgrade manual first.
Reinstall navigation software.