Naxa NAS-3045A Instruction Manual - page 5
www.naxa.com
Page 5
When the speaker is paired and connected to a device,
the status indicator will light a steady blue.
L
L
If the speaker fails to pair with your device:
1) Turn the speaker off; 2) Make sure the
device is set to be discoverable; 3) Turn the
speaker on again. The speaker will attempt
to find and pair with your device.
Your speaker can be paired with one device at a
time, only.
Using the Speaker
When the speaker is connected to a Bluetooth
®
device:
To do this...
...do this
Turn the speaker on or off
Press and hold ON/OFF.
Change the active audio source
mode
Press and hold .
Start, pause, or resume audio
playback
Press
Skip to the previous track
Press –.
Skip to the next track
Press +.
Decrease the volume level
Press and hold –.
Increase the volume level
Press and hold +.
Answer or end a call when connected
to a smartphone
Press .
L
L
Make sure the volume of your connected
device is set to maximum, then use the
speaker’s controls to adjust the volume to
a comfortable listening level.