Naxa NAS-3072 Instruction manual - page 7

www.naxa.com 

Page 7

Automatic Station Scan

Use  the  station  scan  feature  to  find  stations  within 

broadcast reception range and save them to preset 

memory.

1.  Press   [5] once. The sound bar will search for and 

store stations automatically.

Using the AUX Input 

Connector

Connect devices without Bluetooth

®

 by using the AUX 

connection. A 3.5mm stereo patch cable is required to 

make this connection.

1.  Press MODE [11] to switch the speaker to AUX mode.

2.  Use the included AUX cable to connect the device’s 

headphone or line-out jack to the AUX connector 

[2] found on the side of the speaker.

3.  Turn on the device and the speaker. Lower the vol-

ume on both.

4.  Set the device volume to 80% of its maximum and 

then start playback.

5.  Turn the volume dial [8] to increase the volume 

gradually to a comfortable level.

⚠

L

Use the connected AUX device to control 

all functions in AUX mode. The speaker can 

only be used to adjust the volume.