Naxa NAS-3073 Instruction Manual - page 9
www.naxa.com
Page 9
Using the Radio (FM)
Your speaker can receive FM radio broadcasts. Press
and hold [6] to switch the speaker to Radio mode.
L
L
For better reception, plug the small micro
USB connector of the included cable into
the DC 5V/AUX/FM port of the speaker [1].
The first time you use the FM radio, press to scan for
stations and save them to preset memory. You should
also do this if you move the speaker to a different loca-
tion as the available stations will change.
When listening to the FM radio:
To do this...
...do this
Scan for stations and save them to
preset memory
Press
in
Tune to a lower preset station
Slide
the left
Tune to a higher preset station
Slide
the right
Decrease the volume level
Slide and hold
towards the left
To do this...
...do this
Increase the volume level
Slide and hold
towards the right
Using the Music Player
(MP3)
Your speaker can play MP3 files from microSD/microS-
DHC memory cards as well as USB flash memory de-
vices. Load memory cards in the TF slot [6]; USB flash
drives should be plugged in to the USB port [7]. The
speaker will switch to Music Player mode automati-
cally when it detects a USB flash drive or memory card.
L
L
Music Player mode is only available when
the speaker detects a compatible memory
card or USB device.
The memory card and USB reader cannot
be used at the same time. Please connect
only one type of memory device at a time.