Naxa NAS-3077 Instruction Manual - page 7
www.naxa.com
Page 7
⚠
⚠
The battery used in this device may present
a fire or chemical burn if mistreated. Do not
disassemble, incinerate, or heat the battery.
Do not leave the battery in a place subject
to direct sunlight, or in a car with its win-
dows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of fire
or electric shock.
Turning the Speaker On/Off
To turn the speaker on, set the ON/OFF switch [1] to the
“ON” position. The Power LED [15] will light blue.
To turn the speaker off, set the ON/OFF switch [1] to
the “Off” position.
About the Status Indi-
cators
The status indicators light up to let you know which
mode the speaker is in.
Status indicator
Speaker Mode
Charge LED [3]: Steady red
when the speaker is connected
to USB power.
The speaker is charging.
Charge LED [3]: Off when the
speaker is connected to USB
power.
The speaker is fully charged.
Status LED [6]: Flashing
quickly green.
The speaker is on and is
ready to pair to a Bluetooth
®
device.
Status LED [6]: Steady green.
The speaker is connected to a
Bluetooth device
Status LED [6]: Flashing slowly
green.
The speaker is playing audio
from a Bluetooth device.
Power LED [15]: Steady blue.
The speaker is on.