Naxa NAS-3080 Instruction Manual - page 10

Page 10 

Naxa Electronics

When the speaker is in MP3 Music Player mode:

To do this...

...do this

Start, pause, or resume audio 

playback

Press 

.

Skip to the previous track

Press 

Skip to the next track

Press 

.

Decrease the volume level

Hold 

.

Increase the volume level

Hold 

.

L

⚠

Do not remove memory cards from the 

speaker while the speaker is on. Doing so 

may damage the speaker system or mem-

ory card. 

Using AUX Input Mode

Connect devices without Bluetooth

®

 by using the AUX 

connection. The included 3.5mm AUX adapter is re-

quired to make this connection. 

1.  Connect the 3.5mm plug of the included AUX adapt-

er to the device’s headphone or line-out jack.

2.  Connect the small micro USB plug to the DC 5V port  

of the speaker [1].

3.  Press and hold 

 to switch the speaker to AUX 

Input mode. 

4.  Turn on the device. Lower the volume on both the 

device and speaker.

5.  Set the device volume to 80% of its maximum and 

then start playback.

6.  Press and hold   to gradually increase the volume 

of the speaker to a comfortable level.

L

L

Use the connected AUX device to control 

all functions in AUX mode. The speaker can 

only be used to adjust the volume.