Naxa NCA-697 Instruction Manual - page 7
25. RESET BUTTON
Before operating the unit for the first time, or after replacing the car battery or
changing the connections. You must reset the unit.
Press this button with a cuspidal object. This operation will erase the clock
setting and some stored contents.
26. RELEASE BUTTON
Press the REL button to release the front control panel from the unit chassis,
then pull it up a little to remove from the unit chassis.
When the front control panel is removed the LED indicator flashes.
27. INFRARED REMOTE CONTROL SENSOR
Page 6
Page 9
CONNECTOR A
1.
2.
3.
4. Memory +12V
5. Auto Antenna Output
6.
7. 12V (To Ignition Key)
8. GROUND
CONNECTOR B
1. Rear Right Speaker (+)
2. Rear Right Speaker (-)
3. Front Right Speaker (+)
4. Front Right Speaker (-)
5. Front Left Speaker (+)
6. Front Left Speaker (-)
7. Rear Left Speaker (+)
8. Rear Left Speaker (-)
WIRES CONNECTION
ISO SOCKET SKETCH
F
U
S
E
7
.5
A
ISO SOCKET
ANTENNA JACK
RCA LINE OUT
RED R
WHITE L