Naxa NCD-687 Instruction manual - page 9
1.11 UNIT INSTALLATION
IN STAL LATION INST RUC TION
TO B OOS T UP THE CAPA BILITY OF
AN TI -JAMMI NG, PLEASE F IX T HE
META L STRAP ON THE METAL
CON NE CT ED TO TH E BOTTOM
BR ACKET OF THE CAR.
METAL STRAP
DASH BOARD
SLIDING METAL HOU SING
TO DRAW THE CHASSIS OUT OF THE
SLIDING METAL HOUSING, INSERT
THE LEFT AND RIGHT KEY PLATES
INTO THE RIGHT POSITION OF THE
2 SIDES OF CHASSIS.
FRONT PANEL
P LA ST IC T RI M O UT
UNIT CHASSIS
SELECT THE PROPER FIXER
FOR FIXING THE SLIDING
METAL HOUSING.
NOTE
TO INSTALL THE FRONT PANEL
BACK I N TO THE PANEL HOUSING,
FIRSTLY INSTALL THE LEFT SIDE
BACK I N TO THE RIGHT POSITION,
THEN P USH THE RIGHT SIDE BACK
TO THE PANEL HOUSING TILL IT
CLIPS INTO THE POSITION.
R EMOVE T HE SLIDI N G
M E TAL HOU SING
RESET B UTTON
PRESS RES ET BUTTON TO RESUM E
THE DISTORT ED P ROGRAM WHEN
THE LC D DIS PL AY IMPRO PERLY OR
SOM E BUTTONS ARE INVAL ID.
TO REMOVE THE FRONT PANEL
FROM THE PANEL HOUSI NG,
FIRSTLY PRESS THE REL BUTTON
TO DETACH THE F RONT PANEL
FROM THE PANEL HOUSI NG, THEN
HOLD THE FRONT PANEL UPWARD
A L ITTLE AND THEN RE MOVE IT.
REMOVE THE DEC K TRANS PORT
SCRE WS B EFORE OPERAT IN G.
3. During JPEG playback, press one of the >/^/v buttons to change the angle of
viewing picture that is displaying as follows:
>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT
During JPEG playback, press the PROG button to change the mode of refresh picture.
During JPEG playback, press the STOP button to stop playing and return to the root
menu.
*
During JPEG playback, the following buttons are not available: SLOW-FWD,
SUBTITLE, TITLE, ANGLE, AUDIO, RDM, INT and A-B.
*
In JPEG mode,the other operations are same as ones in MP3/WMA mode.
1. The root menu is displayed on TV when beginning to switch on Mp4 mode, then it will
automatically play the first file.
During playback, press the STOP button to stop playing and return to the root menu.
2. When displaying the root menu, press the direction buttons to select your desired
FOLDER ,file or file sort icon, then press the OK or PLAY button to open the FOLDER,
open the files of the file sort icon or play the selected file.
When displaying the root menu, you can also use the number buttons to select the
serial number of the file and play the file.
*
The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid.
*
The other functions are same as ones in DVD mode; but the RPT function is same as
one in MP3/WMA mode.
There is ESP function for all formats of discs.
In MP3/WMA mode, during playback, the information of the file name, folder name,
will be scrolling on the LCD display. As long as the
current playing
music contains relevant
tag information in version 1.0/2.0
format, the 3 items underlined above will be scrolling on the LCD display; otherwise,
they will not.
1. Press the SETUP button on the remote controller to access the DVD System Menu on
the monitor.
2. There are 6 setup pages in all for the System Menu. Press the > or < button to select
an desired setup page.
3. Press the ^ or v button to select an setup item in the selected setup page.
4. Press the > button to enter the setup item. Then press the v or ^ button to select a
desired mode of the setup item, finally press the OK button to confirm it.
*
Press the < button to return to the upper level.
*
Press the SETUP button again or use the direction buttons to highlight the item of the
EXIT SETUP and then press the OK button to exit the System Menu.
4.22 Playback MP4 files
4.23 ESP and
Function
song s title, artist and album
4.24 The DVD System Menu Setup Operation
ID3
MP3
ID3
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com