0
1 using your camcorder turn on/off 1. Press & hold down " " to turn camcorder on. 2. Press " " to turn camcorder off. Note: camcorder will power off after 1 minute if not in used. Change mode press " " to change mode between video record, still photo capture and playback. Record/capture 1. Press " "...
2 note: please insert two fresh aa batteries and sd card to operate the camera tripod nut sd/mmc card slot lcd screen microphone led light speaker appearance usb connector tv out port usb ejector strap holder battery cover lens.
3 a) installing batteries and powering on slide down and remove the battery cover . Insert two new aa alkaline batteries. Note polarity on battery terminals. Slide and close the battery cover. Press and hold down the power switch until lcd panel shows that camera is turned on b) installing sd/mmc ca...
4 d) video and picture taking the sd card must be installed if you wish to record video or take still pictures. Press " " to scroll and select video recording or still photo capture mode. Note related icons visible in left upper corner onto lcd screen. Press " " to begin video recording or take a st...
5 to exit from “pan mode”, press " " button. F) deleting video or still picture selec t the playback mode, press " " and “delete current?” will appear on lcd screen. Press " " to confirm deleting current video or still picture. Press any other button to cancel “delete” function. Press " " twice and ...
6 download video/photos from camcorder to pc 1. After connecting to computer, go to "my computer” and open the "removable disc." the photos or videos will be saved in the \dcim\ 100media folder in the removable disc. Choose the desired photo/video in the 100media folder and copy (drag with mouse) it...
7 file format: avi/jpeg video out: ntsc storage media: uses sd/mmc card (max. 16gb) – not supplied usb port: usb2.0 port power supply: uses two aa alkaline batteries – not supplied system requirements: operation system microsoft windows 2000,xp,vista, 7 cpu above intel piii800 or cpu of equal perfor...
