Naxa NPB-207 Instruction Manual - page 9
CLEANING CD
If the CD skips or will not play , the disc may need
cleaning . Before playing, wipe the disc from the
centreoutwithacleaningcloth.Afterplaying,store
the disc in its case.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by
lightlywipingwithasoftcloth.
IMPORTANT NOTE
If an abnormal display indication or an
operatingproblemoccurs,disconnecttheACpower
cord and remove the batteries. Wait at least 5 sec-
onds, then reconnect the AC power cord or reinstall
the batteries.
WARNING
Should the CD door be opened before the
readingoftheCDcompleted,ajammingnoisemay
occur.ThisisresolvedbyclosingtheCDdoor.
MAINTENANCE
CLEANING THE TAPE HEADS
Tomaintainoptimumsoundquality,cleantheplay-
back/record heads ( a ) ,erasure head (b), pinch
rollers(c),andcapstans(d)regularly(every10hours
ofuse).Useacottonswablightlymoistenedwith
cleaningfluidordenaturedalcohol.
c d a b
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower.
Blow several times on the lens and remove the dust
withthebrush.Fingerprintsmayberemovedwitha
cotton swab moistened with alcohol.
8
DYC686-AF-TCD06-GB ES-NAXA.indd 9