Naxa NPB-242 Instruction Manual

Manual is about: PORTABLE CD/MP3 PLAYER WITH STEREO RADIO CASSETTE RECORDER

Summary of NPB-242

  • Page 1

    Instruction manual portable cd/mp3 player with stereo radio cassette recorder npb-242.

  • Page 2: Important Notes

    1 important notes introduction z thank you for buying our product. Z please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference. Warning to prevent fir...

  • Page 3: Location Of Controls

    2 location of controls.

  • Page 4: Names Of Controls

    3 names of controls 1. Cassette compartment 2. Cd play/pause/usb button 3. Power indicator 4. Cd skip/search back(backward) button 5. Speakers 6. Cd prog./p-mode button 7. Cd stop button 8. Volume control 9. Folding handle 10. Lcd display 11. Fm stereo indicator 12. Tuning control 13. Cd skip/search...

  • Page 5: Using The Radio

    4 using the radio tuning in radio stations 1. Move the function switch to radio position. 2. Slide the band switch to select the desired wave band: am, fm, fm st.. 3. Tune to desired station by rotating the tuning knob. 4. Adjust volume control to desired volume level. 5. Extend telescopic antenna t...

  • Page 6

    5 recording from cd/mp3 1. Insert a blank cassette tape into the tape compartment. 2. Slide the function switch to cd/mp3/usb/aux position. 3. Load a cd and select the desired track you want to record. 4. Press cd play/pause button to start playback. Press record key to begin recording. Record key a...

  • Page 7: Using The Cd/mp3

    6 care of cassette mechanism gently clean the tape head and pinch wheel/capstan assemblies after every 10 hours of using the unit. A range of cassette care products are available. The erase head and record/play head and the surface of the pinch roller are delicate and must not be touched with metal ...

  • Page 8

    7 to search for a particular passage during playback (track scanning at high speed) press and hold the cd skip/search next/back button to scan the current playing track at high speed until desired point passage, and then release the button. Playback will start again from this point. Program tracks p...

  • Page 9: Aux In Operation

    8 listening to usb flash disk device 1. Set the function switch to cd/mp3/usb/aux position. 2. Connect the usb flash disk device into the usb port. 3. If the audio cd in the tray, please press and hold the play/pause/usb button to select the usb function. 4. If the usb is readable, the display will ...

  • Page 10: Specifications

    9 specifications general power requirement ac 127v ~ 60hz dc 9v u m-1 x 6 pc s power consumption ac 15 watts weight approx. 2.2 kg dimensions approx. 300mm (w) x 235mm (d) x 155mm (h) operation temperature +5 o c – +35 o c receiver section receiving bands am/fm tuning range am 530 – 1600 khz fm 88 –...