Naxa NPB?261 Instruction Manual - page 5
8
USB MODE
Play MP3 files from USB memory sticks. Press the FUNCTION button [4] to select “USB” mode.
PLAYING MP3s FROM USB MEMORY
1. Connect the USB memory stick to the USB port [3] found on the top of the unit. The
display will show the total number of playable tracks on the USB device. Playback will
start automatically from Track 1.
2. To pause playback, press the PLAY/PAUSE/PAIR button [13]. The current track time will
flash on the display. To resume playback, press the PLAY/PAUSE/PAIR button [13]
again.
3. To stop playback, press the STOP button [14].
To learn more about programming playlists and repeat/random/intro playback modes, please refer to
the "CD MODE" section of this manual.
NOTICE:
To prevent harmful interference, always connect USB devices directly to
the unit. Do not use a USB extension cable to connect USB devices to the
unit.
Bluetooth
®
MODE
Stream audio wirelessly from players with Bluetooth. Press the FUNCTION button [4] to select "BT"
(Bluetooth) mode.
Wireless players with Bluetooth may include laptops, tablets, smartphones, and more. Make sure that
your player has its Bluetooth radio enabled and that it is set to be discoverable.
CONNECTING A DEVICE FOR THE FIRST TIME (PAIRING)
Before using a wireless device with Bluetooth, you will need to establish a connection between it and
the Boombox. This process is called "pairing" and you will only have to do it once. Once two devices are
paired, they will automatically connect when they detect each other.
1. When you set the Boombox to "BT" mode and it does not detect a paired device, it will
automatically switch to pairing mode. (The blue PAIR indicator will blink when the
boombox is in pairing mode.)
2. On your wireless device, go to its Bluetooth settings menu.
3. Have your wireless device "search for devices". Select the boombox (NPB‐261) when it is
found. Enter the passkey "0000" if the device asks for one.
4. When pairing is complete, the boombox will emit a soft tone, the display will read "BT"
and the blue PAIR indicator will light a steady blue. If a connection cannot be made, the
PAIR indicator will flash once every 2 seconds. (Press the PLAY/PAUSE/PAIR button [13]
to try again.)
The boombox will automatically connect to your wireless device next time as long as it has Bluetooth
enabled, is within range, and is set to be visible to paired devices.
9
Note
:
There are many different Bluetooth enabled devices out there; we cannot
provide instructions for all of them. Please refer to your device
manufacturer's instructions or website to learn more about connecting with
Bluetooth.
AUX‐IN MODE
Play audio from devices connected to the AUX input jack. Press the FUNCTION button [4] to select
"AUX" mode.
1. Connect your audio device to the 3.5mm AUX IN jack [10] found on the top of the unit
with a 3.5mm AUX cable.
2. Set the volume level of the connected audio device to approximately 80%. Make
additional adjustments to the volume level by turning the VOLUME dial [9] of the unit.
3. Control playback with your audio device.