Naxa NPB-270 Instruction Manual - page 11
www.naxa.com
Page 11
• The LED screen [4] will flash the track number.
• Press the key [11] again to resume playback.
• To stop playback, press the key [10].
• To select a track to play:
• Press the key [7] to skip to the next track.
The LED screen [4] will change tracks accord-
ingly.
• Press the key [9] to skip back to the pre-
vious track. The LED screen [4] will change
tracks accordingly.
• To scan through a track at high speed:
• Press and hold the key [7] during playback.
Play will advance quickly through the current
track; release the key to resume playback at
normal speed.
• Press and hold the key [9] during playback.
Play will reverse quickly through the current
track; release the key to resume playback at
normal speed.
Repeat Playback
You can change the order in which the tracks of a CD
are played by pressing the REPEAT key [8]. To cancel
these special playback modes, press the REPEAT key
[8] until the Repeat indicator disappears from the LED
screen [4].
• To repeat a single track, press the REPEAT key [8]
until the Repeat indicator flashes on the LED screen
[4]. The current track will replay repeatedly until
play is stopped.
• To repeat all of the tracks, press the press the
REPEAT key [8] until the Repeat indicator lights
steadily on the LED screen [4]. The player will replay
all tracks continuously until play is stopped.
Programming a Playlist
When the CD is stopped, you can select up to 20 CD
tracks to play in any order that you choose.
1. Press the key [10] to make sure that playback has
stopped.