Naxa NRC-181 Instruction manual - Press The /hr And
www.naxa.com
Page 9
3. Press CLK/MEM. The date will start to
flash.
•
Press the /HR and
/
MIN buttons
to adjust the date.
•
The date format is “MONTH : DAY”.
For example, March 15th will appear
as “3:15”.
4. Press CLK/MEM. The day of the week will
be shown.
•
The day is calculated automatically
from the year and the date.
•
The week starts on Monday. There-
fore, “d1” is Monday, “d2” is Tuesday,
“d3” is Wednesday, “d4” is Thursday,
“d5” is Friday, “d6” is Saturday, and
“d7” is Sunday.
5. Press CLK/MEM to save and exit the set-
ting mode.
Setting the Alarm
Make sure the power is off before setting the
alarms. (Press and hold ALM OFF/SOURCE/
POWER to turn off the power.)
1. Press ALM1/VOL+ to set the alarm 1 mode
to buzzer, radio, or off.
•
The LED indicators will light for
buzzer or radio mode.
•
The alarm is off if all indicators are
off.
2. Press and hold ALM1/VOL+; the time for
ALARM 1 will begin to flash.
•
Press the /HR and
/
MIN buttons
to adjust the alarm time.
•
Take note of the PM indicator when
setting the alarm time.