Summary of NSM-436
Page 2
1 please read this manual carefully before operation precautions caution: to reduce the risk of electric shock, do not remove cover ( or back ), no user-serviceable parts inside. Refer servicing to qualified service personnel. ！ the lightning flash with arrowhead symbol within an equilateral triangl...
Page 3
2 precautions follow the advice below for safe operations. On protection against laser energy exposure • as the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. • stop operation immediately if any liquid or solid object should fall into th...
Page 4
3 important safety instructions 1. Read these instructions - all the safety and operating instructions should be read before the appliance is operated 2. Keep these instructions - the safety and operating instructions should be kept for future reference. 3. Heed all warnings - all warnings on the ap...
Page 5
4 compliance with fcc regulations this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation .This equipm...
Page 6
5 cd care & maintenance handling cds holds a cd by its edges .Avoid touching the recorded side of the disc .To remove a cd from its storage case , press down on the center retention mechanism of the case and lift the disc , cleaning the cds use a dry cloth to wipe off any fingerprints and dusts from...
Page 9
8 20. Right speaker jack 21. Left speaker jack 22. Wall mounting slot functions and controls remote control 1. Power 2. Track+10 3. Id3 4. Menu 5. Enter► 6. Stop 7. Program play mode 8. Fm.St 9. Band 10. Function 11. Folder-dn 12. Folder-up 13. Mute 14. Vol- 15. Vlo+.
Page 10
9 connections speakers ◆ connect the black wire of the left speaker to the black terminal marked “l-“on the rear of the main unit . ◆ connect the white wire of the left speaker to the red terninal marked”l+” on the rear of the main unit. ◆ connect the black wire of the right speaker to the black ter...
Page 12
11 basic operation 1. Press function repeatedly to select cd mode. 2. To open the cd door ,press the cd open button on the top of the unit. Insert a cd with its label facing up.Close the cd door (it will click into place) 3. The cd will automatically play after reading the disc. Cd functions play/pa...
Page 13
12 drm-encrypted wma files are not supported. Basic operation ◆ press function to select usb or sd card mode . ◆ connect a usb drive containing mp3/wma files to the usb port or sd/mmc card to the sd/mmc card slot on the bottom side of the unit. Playback will start automatically. ◆ press enter ►to pa...
Page 14
13 program play operation program a sequence of up to 20 tracks to be played . In cd disc mode 1. Press stop to make sure playback is stopped . 2. Press program play mode button to enter program mode .The lcd screen will display 『 memory』, 『p01』and flashing 『00』. 3. While 『00』is blinking , press fm....
Page 15
14 menu function timer (automatical power on ) 1. Press menu on the remote control repeatedly until the lcd screen displays “timer” , press enter ►to enter to set the timer . Press fm.St or band to select the timer on, then press enter ►to set the timer . . 2.. Hour digit will flash , press fm.St or...
Page 16
15 basic operation 1. Use a 3.5mm male to male line in cable (included) to connect the line-out or headphone out jack of an audio device to this system auxiliary line-in jack. 2. Press power to turn the player on . 3. Set the function mode switch to the “aux” position . 4. Start playback on the exte...
Page 17
16 playback is “skipping” ◆ ensure that the cd is not damaged ,scratched ,or dirty. ◆ ensure that the unit has been installed in a stable location to avoid vibration and shock . The player will only play one track ,repeatly . ◆ ensure that repeat mode is off (press repeat to cancel ). The function m...