Naxa NT-70 Instruction Manual - page 8

Page 8 

Naxa Electronics

14

USB port

Load a USB memory stick with compatible 

media files, then set the active source mode 

to USB.

15

SD card 

slot

Load an SD card with compatible media files, 

then set the active source mode to CARD.

16

Antenna 

input jack

75 ohm coaxial connector for TV antennas.

17

Head-

phone jack

3.5 mm stereo audio output.

18

AV1 In jack Use with the included A/V cable to connect 

an external composite video/audio source, 

then set the active source mode to AV1.

19

AV2 In jack Use with the included A/V cable to connect 

an external composite video/audio source, 

then set the active source mode to AV2.

20

DC input

Use with the included AC power adapter or 

DC power cord.

21

Master 

Power 

Switch

Set to ON to use the TV. If you will not be 

using the TV for an extended period of time, 

set the switch to OFF to turn the unit off 

completely. (The TV will use a little bit of 

power when the switch is set to ON and the 

TV is placed in Standby mode.)