Naxa NTD-1552 Instruction Manual - page 17
Media Type
Format
Video
Audio
Photo
MPEG1, MPEG2
WMA, MP3
JPEG
--GENERAL SETUP PAGE--
TV DISPLAY
WIDE
OSD LANG
ENG
CAPTIONS
OFF
SCREEN SAVER
ON
DEFAULT
GOTO GENERAL SETUP PAGE
ANGLE MARK
ON
--AUDIO SETUP PAGE--
GOTO AUDIO SETUP PAGE
SPEAKER SETUP
INITIAL SETTING(DVD)
The card reader can read SD/MMC/MS 3 kinds of cards and USB storage
Common procedure for initial settings
●
●
●
●
Press SETUP button on remote control.
Use the navigation buttons to select preferred item, and press ENTER button,
each screen for setting the value is displayed. Then move the navigation buttons to set the item
and press ENTER button to confirm the settings.
Press SETUP button to close setup menu.
Use LEFT or RIGHT navigation button to switch to another main setup item.
Then press RIGHT or ENTER button to enter submenu page; press LEFT button to return to previous
menu page.
- It is for selecting TV output mode.
Options: NORMAL /PS: Pan & scan mode
NORMAL/ LB: Letter box mode
WIDE: 16:9 wide screen mode
- It is used to select whether or not
the multi-angle icon is display on screen when a
Multi-angle DVD disc is playing.
Options: ON: Icon will be displayed.
OFF: Icon will be turned off.
- It is used to choose the desired
language for different user. In this player, you can
choose English or other languages.
- It is used to switch the caption ON/OFF when playing DVD disc.
- When the player is not in use for 5 minutes, a screen saver will
move across the screen to protect the TV CRT.
Options: ON: Screen saver is enabled.
OFF: Screen saver is disabled.
- It is used to reset to factory settings.
- It is used to set the speaker
output levels.
Options: LT/RT-Left/Right mix mode
STEREO - Select this option if you don't
have a 2.1 channel amplifier.
1.GENERAL SETUP
1.1 TV DISPLAY
1.2 ANGLE MARK
1.3 OSD LANG
1.4 CAPTIONS
1.5 SCREEN SAVER
1.6 DEFAULT
2. AUDIO SETUP
SPEAKER SETUP
SD/MMC/MS