NBN TG799 Installation Instructions Manual

Summary of TG799

  • Page 1

    Getting connected installation instructions for your nbn modem tg799 this guide is designed to help you get started with your new modem. It relates to services being delivered over nbn fttn connections. Please make sure you keep it in a safe place, as you may find you need to refer to it again at a ...

  • Page 2: Important:

    1 important: read before you start in most cases an nbn technician will not need access to your premises in order to connect you to the nbn. If access is required, then one of our staff members will contact you to arrange a suitable time. Once connected to the nbn, your home phone or broadband servi...

  • Page 3

    2 contents 01. Nbn modem 02. Wan ethernet cable (white with red ends) 03. Lan ethernet cable (white with yellow ends) 04. Telephone cables (grey) x 3 05. Power supply adaptor and cable 06. Wi-fi information label (sample) 01. 02. 03. 04. 05. 06..

  • Page 4

    3 lights on the nbn modem light definition function status status indicator (status has no other button functionality) off – no power green solid – normal operation green flashing – device starting up red – no internet connection wan wide area network off – no network connection green solid – networ...

  • Page 5

    4 buttons on the nbn modem a b a b c d button definition function a reset reset button when pressed for more than seven seconds it will reset the modem to its factory settings. Any configuration changes you have made previously will be lost. B power switch to turn the modem on or off c wps wps – wi-...

  • Page 6

    5 sockets on the nbn modem pstn n/a ports connect your data devices (pc, laptop, smart tv) to these ethernet ports. Power connect the power supply adaptor cable here. Phone 1 and 2 connect your telephone(s) or home wiring to the green phone ports. Dsl this socket is used to connect your nbn modem to...

  • Page 7

    6 1. 2. 3. 4. 5. 6. 7. Step-by-step guide to installing the nbn modem plug a telephone into the wall socket and check if there is a dial tone. If there is no dial tone on the line, please contact us prior to proceeding. If there is a dial tone present, unplug your phone, splitters/filters and adsl m...

  • Page 8

    7.