Page 1 of 10 digitizer capture card - pci rgb user manual.
Page 2 of 10 table of contents 1. Introduction ....................................................... 3 2. Hardware overview........................................... 3 resolutions.................................................................................................................3 fra...
Page 3 of 10 1. Introduction the ncast digitizer capture card functions as an analog rgb and video capture device. The digitizer card is primarily designed for applications requiring high resolution and high frame rates. Example applications include webcasting over ip, local capture, remote viewing,...
Page 4 of 10 please reference the table below for a list of supported input resolutions: resolution frequency 640x350 70hz 640x400 56hz 640x480 66hz (mac) 640x480 60, 72, 70, 75, 85hz 720x400 70, 85hz, (text modes) 800x600, 56, 60, 72, 75, 85hz 832x624 75hz 1024x768 60, 70, 75, 85hz all following re...
Page 5 of 10 3. Specification physical half-size pci card one female dvi-analog connector one female high density 15 pin vga connector one composite video connector optional s-video connector (different bracket) pixel rate 165 mhz graphics sampling 24 bits per pixel/8-8-8 format input resolutions su...
Page 6 of 10 2000 kernel streaming model, and therefore the digitizer capture card can be used with all windows video capture programs. The digitizer capture card and driver has been tested with the following capture programs: • windows media encoder • real producer • windows movie maker functionali...
Page 7 of 10 see the below screen shots of the digitizer's custom property page. (a) available inputs, (b) click on the refresh button to read currently detected input resolutions. (a) (b) windows driver api & other software the digitizer capture card api allows users to: • change selected input • d...
Page 8 of 10 the digitizer capture card is packed in anti-static material, and should be kept in this material until the user is ready to install it. Follow the instructions below for installing the digitizer pci card: • verify that all power is off to the pc and disconnect all cables. • remove the ...
Page 9 of 10 6. Quick start windows movie maker 1. Launch "windows movie maker", which is a standard windows program. 2. Choose "file / capture from device". 3. Then choose "ncast capture" as capturing device . 4. Do not continue with capturing, choose "configure" 5. Choose configure 'camera setting...
Page 10 of 10 7. Technical support customers can access support documentation at www.Ncast.Com . Also, users can send an e-mail to info@ncast.Com with as much information as your reference system as possible. Also, feel free to contact us appropriately below: ncast corporation 155a moffett park driv...
