Installation there are a few easy steps to get your pr-mini recorder and streamer up and running: unpack the unit and plug in the micro-usb power supply, your ethernet cable (if you will be using a wired connection) and an hdmi monitor (if you have one). Power on the unit. Make note of the serial nu...
Configuring from a boot file the following file may be used to configure the wired and wireless addresses of the recorder. Create a file called “network.Txt” and place on a usb stick during the boot process. Dhcp=true dns_1=8.8.8.8 dns_2=8.8.4.4 gateway=192.168.10.1 ipaddress=192.168.10.24 netmask=2...
Warranty information thank you for your purchase of ncast corporation products. We strive to provide you with the best quality and service possible. Our standard limited warranty terms and conditions are stated below: ncast corporation warrants that its products will be free from defects in material...
