NCE CAB-04p Operation Manual

Summary of CAB-04p

  • Page 1

    Photo of shift button installed in radio cab - warranty this product is fully factory tested and warranted against manufacturing defects for a period of 1 year. As the circumstances under which this product is installed can not be controlled, failure of the product due to installation problems can n...

  • Page 2

    To the right is an illustration of the cab04 intermediate cab. Following is a description of the various controls and indicators of the cab. Status led to the left of the speed control knob is the cab status led. It will briefly flash whenever a key is pressed or will glow continuously to indicate w...

  • Page 3

    If you set the option key to emergency stop (76) pressing the e-stop key once will stop the active loco/consist for this cab only. Speed will be immediately set to zero (no momentum). Loco is restarted by changing the speed or direction. Whole layout emergency stop note* this feature is only availab...

  • Page 4

    To change between regular and yard modes: l) turn on the dcc system. 2) unplug your cab04 from the cab bus 3) plug the cab back in while holding down the select loco button. 4) release the select loco button. The cab will now enter its internal setup program indicated by a flashing led. 5) press "2"...