Summary of iSTAR 360
Page 2
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 2 thank you for purchasing istar. Before starting the camera, we thoroughly recommend reading this instruction manual first so as to familiarise yourself with all camera operations. To prevent accidents and damage, please also read...
Page 3: Contents
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 3 contents safety warnings ........................................................................................................................... 5 p reventing s erious i njury or e quipment d amage ..............................
Page 4
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 4 gps, audio and tilt compensation: ............................................................................................. 15 format sd card ......................................................................................
Page 5: Safety Warnings
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 5 follow these safeguards and use the equipment properly to prevent injury, and material damage. To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: -‐ do not connect any other device su...
Page 6: Handling Precautions
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 6 this imaging camera is a precision instrument. Do not drop it or subject it to physical shock. Do not adjust or tamper with the camera lenses as this could result in damage and the lenses going out of focus. Care should be taken ...
Page 7: Istar Overview
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 7 istar overview equipment istar is shipped with the following equipment: 1. Carry case 2. Ac power cable supply unit with cable 3. Powerblock battery 4. Sd memory card and memory card case 5. Usb memory stick 6. Lens cleaning clot...
Page 8: Side Port View
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 8 ethernet hdmi out usb port 12vdc in reset button hand grips sd card slot wifi signal vent lens mini usb b serial number 1/4” thread tripod mount grip area battery cover slide to open battery cover screw safety strap pin quick rel...
Page 9: Getting Started
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 9 1. To charge the battery, connect the dc power supply to the camera and switch on at the mains plug socket. 2. When the power cable is attached, an audible “beep” will be heard. 3. After a short time of charging the battery icon ...
Page 10: Main Menu
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 10 turning off the camera to turn off the camera, touch the power icon . You will then be asked to confirm by tapping the tick box. To cancel and return to the start screen, tap the x button. Main menu.
Page 11: Image Capture
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 11 image capture capturing an image from the start menu, press the icon to navigate to the capture/view screen. You can capture a panoramic image via two methods: delay capture; or in walk around mode. Capture distance the optimal ...
Page 12: Image Review
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 12 live view mode live view mode provides a live immersive view of the scene from the camera. Press the icon and use your finger to rotate the image. Pressing the back arrow at the top left corner of the screen will return you to t...
Page 13: Settings
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 13 settings from the start menu, press the icon to navigate to the “image review” screen. Network settings from the settings menu, press the icon to navigate to the “network settings” screen. Ethernet ip settings from the settings ...
Page 14
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 14 capture settings from the main capture settings menu, press the icon to navigate to the “capture settings” screen. Capture settings: exposure: tap the exposure button to change the number of exposures you want to capture. (optio...
Page 15
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 15 display settings from the settings menu, press the icon to navigate to the “display settings” screen. Backlight timeout: to change the timeout delay of the lcd screen, touch the time button and select the desired time. (options:...
Page 16: Trouble Shooting
Istar users manual v.1.1. January 2013. © 2013 nctech limited. Page: 16 trouble shooting reset button should you experience problems with the camera, use the reset button to shutdown the unit. 1. Locate the reset button on the rear of the camera behind the rubber port panel. 2. Use a pointed object ...