Nebula RGBW 4in1 User Manual

Manual is about: LED Moving Head Beam

Summary of RGBW 4in1

  • Page 1

    1 user manual rgbw 4in1 led moving head beam please read over this manual before operating the light fixture.

  • Page 2: Contents

    2 contents 1. Foreword…………………………………………………3 2. Security indication……………………………………3 3. Operating provisions………………………………..4 4. Technical specification……………………………...5 5. Controller choose function…………………………6 6. Lcd panel indication………………………………….6 7. Using construction ……………….…………………..7 8. Connect multipl...

  • Page 3

    3 foreword thanks for you using the led moving head light of our guangzhou nebula professional stage equipments co., ltd. Please read this product manual carefully before using. Anyone undertake the installation, operation and maintenance of light fixture, should be as follow: ------- required profe...

  • Page 4

    4 check the power cord whether distorted or damaged by sharper. Do not let power cord touch other cord directly, and be careful when operate power cord & all joints etc! Only can hold its joints when move power cord. Hold joints then draw carefully from jack when need to cut power, and do not draw c...

  • Page 5

    5 yourself or others. Keep the distance at least 1 m between light and receiving surface. Whatever install, uninstall or repair, please insure enclose the light bottom properly. At lease use 2 safe cords and safe cord can not use the same lifting hole with light hook. Environment temperature can not...

  • Page 6

    6 dimension:80*9*25 cm controller choose function 16channels 16channel 4 head beam bar ch16 mode channel list channe l function channel value description ch1 total dimmer 0 fixture stop closing lighting and stop macro function 1-255 when 0,light brightness ratio control,0%~100% ch2 choose light 0 al...

  • Page 7

    7 45channels ch13 x fine 0-255 ch14 y fine 0-255 ch15 dimmer speed 0-255 from slow to fast ch16 reset 0-249 no effect 250-255 stay five second all motors reset 4 head beam bar ch45 mode channel list channel function channel value description ch1 x1 0-255 ch2 y1 0-255 ch3 xy1 speed 0-255 xy speed, fr...

  • Page 8

    8 ch26 y4 0-255 ch27 xy4 speed 0-255 xy speed, from fast to slow ch28 strobe 4 0-3 no 4-255 strobe,from slow to fast ch29 r4 0-255 ch30 g4 0-255 ch31 b4 0-255 ch32 w4 0-255 ch33 x1 fine 0-255 ch34 y1 fine 0-255 ch35 x2 fine 0-255 ch36 y2 fine 0-255 ch37 x3 fine 0-255 ch38 y3 fine 0-255 ch39 x4 fine ...

  • Page 9

    9 using construction first menu second menu value remark d.001(dmx address) 1-512 manu p.000(pan) 0-255 overall t.000(tilt) 0-255 r.000(red) 0-255 g.000(green) 0-255 b.000(blue) 0-255 w.000(white) 0-255 s.000(strobe) 0-255 auto at.50 0-99 built-in program auto,0-99 speed fast to slow rd.50 0-99 rand...

  • Page 10

    10 detected magnetism, "00"means not detected magnetism t4.00 99.-99 connect multiple fixtures note: avoid twisted cables, especial the signal wire and power wire, either close to each other. Otherwise, the projector may not work normally connect multiple fixtures with 3 round pin/xlr plug of shield...

  • Page 11

    11 cleaning and maintenance note should cut off the power before to clean and maintaining of the projector. Do not use the projector if the lens is damaged, such as crack or scratch and so on, make sure to keep its normal functions users should keep taking a full testing for the light security & ins...

  • Page 12

    12 appendix technical specification weight and size length---------------------------------------------------------------------------800mm width----------------------------------------------------------------------------200mm height--------------------------------------------------------------------...