Nec solutions (america), inc. For the specifications of your plasma monitor, refer to “model information”. Operation manual (enhanced split screen model).
2 precautions please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. Caution risk of electric shock do not open caution: to reduce the risk of electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to qualifi...
3 your investment in this plasma monitor, please adhere to the following guidelines and recommendations for minimizing the occurrence of image burn: * always enable and use your computer’s screen saver function during use with a computer input source. * display a moving image whenever possible. * ch...
4 fabricant décline toute responsabilité en cas de blessure corporelle ou de dégâts matériels résultant d’une opération d’entretien quelconque effectuée par des personnes non qualifiées ou résultant de l’ouverture du couvercle arrière. S’adresser aux services après-vente autorisés. Pour éviter des d...
5 contents contents of the package 䡺 plasma monitor 䡺 power cord 䡺 remote control with two aaa batteries 䡺 manuals (model information and operation) 䡺 safety metal fittings* 䡺 ferrite cores, bands 䡺 cable clamps 䡺 hdmi-dvi cable * contents will differ according to the model. * these are fittings for...
6 50 mm (2") 50 mm (2") 50 mm (2") wall wall 50 mm (2") 50 mm (2") you can attach your optional mounts or stand to the plasma monitor in one of the following two ways: * while it is upright. (see drawing a) * as it is laid down with the screen face down (see drawing b). Lay the protective sheet, whi...
7 cables clamp mounting hole approx. 7m / 23ft how to use the remote control battery installation and replacement insert the 2 “aaa” batteries, making sure to set them in with the proper polarity. 1. Press and open the cover. 2. Align the batteries according to the (+) and (–) indication inside the ...
8 q power turns the monitor’s power on and off. W remote sensor window receives the signals from the remote control. E power/standby indicator when the power is on ............................. Lights green. When the power is in the standby mode ... Lights red. R input select / exit switches the inp...
9 a ac in connect the included power cord here. B ext speaker l and r connect speakers (optional) here. Maintain the correct polarity. Connect the (positive) speaker wire to the ext speaker terminal and the (negative) speaker wire to the ext speaker terminal on both left and right channels. Please r...
10 q power on/standby switches the power on/standby. (this does not operate when power/standby indicator of the main unit is off.) w off timer activates the off timer for the unit. E display displays the source settings on the screen. R wide automatically detects the signal and sets the aspect ratio...
11 basic operations power to turn the unit on and off: 1. Plug the power cord into an active ac power outlet. 2. Press the power button (on the unit). The monitor’s power/standby indicator turns red and the standby mode is set. 3. Press the power on button (on the remote control) to turn on the unit...
12 wide screen operation (manual) with this function, you can select one of six screen sizes. When viewing videos or digital video discs 1. Press the wide button on the remote control. 2. Within 3 seconds ... Press the wide button again. The screen size switches as follows: → normal → anamorphic → s...
13 information supported resolution see page 7 of model information for details on the display output of the various vesa signal standards supported by the monitor. When 852 (848) dot 480 line wide vga* signals with a vertical frequency of 60 hz and horizontal frequency of 31.7 (31.0) khz are in- pu...
14 information split screen operations may not function depending on the combination of input signals. In the table below, “ ” means yes, “ ” means no. Split screen operations may not function depending on the type of the rgb signals. Split screen operations video1 sub screen main screen rgb/pc1 a v...
15 operations in the picture-in-picture mode to move the position of the sub screen, press the cursor or button. To change the size of the sub screen, press the button. Video1 rgb/pc1 a b video1 rgb/pc1 a b video1 rgb/pc1 a b video1 rgb/pc1 a b button button button button to make the desired picture...
16 menu operations the following describes how to use the menus and the selected items. 1. Press the menu/enter button on the remote control to display the main menu. Sel. Menu/enter ok exit exit m a i n m e n u p i c t u r e au d i o i m ag e a d j. S e t u p f u n c t i o n s i g n a l i n f o. 2....
17 main menu sub menu sub menu 2 sub menu 3 sub menu 4 reset reference picture picture memory off/memory1-6 yes 19 contrast ←→ 0 ← 52 → 72 yes 19 brightness ←→ 0 ← 32 → 64 yes 19 sharpness ←→ 0 ← 16 → 32 yes 19 color ←→ 0 ← 32 → 64 yes 19 tint r ←→ g 0 ← 32 → 64 yes 19 nr off/nr-1/nr-2/nr-3 yes 19 c...
18 *1 only when auto picture is off. *2 rgb/pc only main menu sub menu sub menu 2 sub menu 3 sub menu 4 reset reference function power mgt. On ←→ off yes 26 input skip on ←→ off yes 26 sub. P detect auto ←→ off yes 26 zoom nav off ←→ s by s ←→ btm left ←→ btm right ←→ top right ←→ top left yes 27 pi...
19 picture settings menu storing picture settings this function allows you to store in memory the current input signal and picture menu settings and to recall these settings when necessary. There are six picture memories, and notes of up to 15 characters can be added to each. Example: storing pictur...
20 setting the color temperature use this procedure to set color tone produced by the plasma display. Example: setting “high” on “color temp.” of “picture” menu, select “high”. Sel. Adj. Exit return p i c t u r e p i c t u r e m e m o ry c o n t r a s t b r i g h t n e s s s h a r p n e s s c o l o ...
21 adjusting the colors use this procedure to adjust hue and color density for red, green, blue, yellow, magenta and cyan. You can accentuate the green color of trees, the blue of the sky, etc. Example: adjusting the color tune for blue on “picture” menu, select “color tune”, then press the menu/ent...
22 audio settings menu adjusting the treble, bass and left/right balance and audio input select the treble, bass and left/right balance can be adjusted to suit your tastes. Example: adjusting the bass on “bass” of “audio” menu, adjust the bass. Sel. Adj. Exit return au d i o ba s s t r e b l e ba l ...
23 set up settings menu setting the language for the menus the menu display can be set to one of eight languages. Example: setting the menu display to “deutsch” on “language” of “set up” menu, select “deutsch”. Sel. Adj. Exit return s e t u p l a n g uag e b n c i n p u t d - s u b i n p u t h d s e...
24 information 䡵 rgb select modes one of these 7 modes must be selected in order to display the following signals correctly. Auto: select the suitable mode for the specifications of input signals as listed in the table “computer input signals supported by this system” on page 7 of model information....
25 setting the screen size for s1/s2 video input if the s-video signal contains screen size information, the image will be automatically adjusted to fit the screen when this s1/s2 is set to auto. This feature is available only when an s-video signal is input via the video3 terminal. Example: setting...
26 function settings menu setting the power management for computer images this energy-saving (power management) function automatically reduces the monitor’s power consumption if no operation is performed for a certain amount of time. Example: turning the power management function on on “power mgt.”...
27 reducing burn-in of the screen the brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce burn-in of the screen. On “pdp saver” of “function” menu, select “manual”, then press the menu/enter button. The “pdp saver” screen appears. Sel...
28 peak bright use this to activate the brightness limiter. Example: setting “peak bright” to “75%” on “peak bright” of “pdp saver” menu, select “75%”. Sel. Adj. Exit return p d p s av e r p e a k b r i g h t o r b i t e r i n v e r s e / w h i t e s c r e e n w i p e r s o f t f o c u s o s m o r b...
29 osm orbiter use this to set osm menu shift. Example: setting “osm orbiter” to “off” on “osm orbiter” of “pdp saver” menu, select “off”. Sel. Adj. Exit return p d p s av e r p e a k b r i g h t o r b i t e r i n v e r s e / w h i t e s c r e e n w i p e r s o f t f o c u s o s m o r b i t e r o s ...
30 application these specifications cover the communications control of the plasma monitor by external equipment. Connections connections are made as described below. Connector on the plasma monitor side: external control connector. Use a crossed (reverse) cable. Type of connector: d-sub 9-pin male ...
31 remedy • if there are no abnormalities in the image and sound, the noise is caused by the cabinet reacting to changes in temperature. This will not affect performance. • leave some space between the display and the connected components. • replace both batteries with new ones. • plug the monitor’s...
32.
33.
34.
Limited warranty residential entertainment plasma monitors nec solutions, inc. (hereinafter nec solutions) warrants this product to be free from defects in material and workmanship under the following terms and, subject to the conditions set forth below, agrees to repair or replace (at nec solutions...
Printed on recycled paper printed in japan 7s801441 nec solutions (america), inc. 1250 n. Arlington heights road, suite 400 itasca, illinois 60143-1248.