NEC 60XP10 - PlasmaSync - 60" Plasma Panel Installation Manual

  NEC Corporation of America 

         Visual Systems Division 

P60XP10-BK Installation Guide 

60” Plasma Display   

Rev 1.0 

www.necvisualsystems.com

P60XP10-BK 

Page 1 of 10 

Contents:  

Product Description and Notes          

Page 1  

Ventilation Requirements            

Page 2  

Display Dimensions  

Front, Top, Bottom & Right Side      

Page 3  

  Rear             

Page 4  

Display Dimensions w/Optional Speakers and Stand     

Page 5 

Optional Stand Dimensions ___________  __ 

Page 6 

Optional Speakers Dimensions         

________ 

Page 7  

Connections               

Page 8 

PC Control               

Page 9, 10 

Product Description                             

Type:       

Plasma Display           

Screen Surface:   Anti-Reflective  

Resolution:   

1366x768            

Dimensions:   

56.97”(W) x 34.28”(H) x 5.00”(D)  

Aspect Ratio:   

16:9 

Weight:    

151.0 lbs  

FCC: 

Class B 

Notes  

 This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to 

be a step-by step procedure for installation.  

 Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local  

building codes. All mounts should make secure contact to wood studs.  

 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to 

fill the screen using the menus (see “Aspect Modes” in menus and user manual).  

 Distances are in inches, for millimeters multiply by 25.4.  

 Distances may vary ±5%.  

Maximum Tilt Angles                              

Below are the maximum angles that the display can be tilted in both landscape and portrait mode  

    Landscape 20°  

    Portrait 20°