Accusync tm lcd200vx.
Index warning .................................................................................................................... 1 contents ................................................................................................................. 2 quick start .................................
1 caution: to reduce the risk of electric shock, make sure power cord is unplugged from wall socket. To fully disengage the power to the unit, please disconnect the power cord from the ac outlet.Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service per...
2 accusync tm lcd200vx * remember to save your original box and packing material to transport or ship the monitor. Power cord video signal cable user’s manual your new nec accusync™ lcd monitor box* should contain the following: • accusync lcd200vx monitor with height adjustable base • power cord • ...
3 quick start to attach the lcd monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the pc or mac with dvi digital output: connect the dvi signal cable (not included) to the connector of the display card in your system (figure a.1). Tighten all screws. F...
4 quick start –continued cable cover input1 (d-sub) input2 (dvi) input1 (d-sub) input2 (dvi) figure c.1 figure d.1 vacation switch power button aslcd200vxmanual062204.P65 6/23/04, 8:41 am 4.
5 quick start –continued raise and lower monitor screen to raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (figure rl.1). Note: handle with care when raising or lowering the monitor screen. Figure rl.1 swivel grasp both sides of the monitor scre...
6 quick start –continued remove monitor stand for mounting to prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place hands on each side of the monitor and lift up to the highest position. 3. Place monitor face down on a non-abrasive surface. (place the screen on a 51...
7 quick start –continued this lcd monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the...
8 note: when reset is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the reset function by pressing the exit button. Brightness/contrast controls brightness adjusts the overall image and background screen brightness. Contrast adjusts the image brightness in rel...
9 controls tools 1 sharpness: this function is digitally capable to keep crisp image at any timings. It is continuously adjustable to get distinct image or soft one as you prefer, and set independently by different timings. The number of adjustment steps is different depending on whether expansion m...
10 controls –continued information display mode: indicates the current display resolution and frequency setting of the monitor. Monitor info.: indicates the model and serial numbers of your monitor. Osm ® warning: osm warning menus disappear with exit button. No signal: this function gives a warning...
11 safety precautions and maintenance for optimum performance, please note the following when setting up and using the accusync lcd color monitor: • do not open the monitor. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other r...
12 recommended use –continued correct placement and adjustment of the monitor can reduce eye, shoulder and neck fatigue. Check the following when you position the monitor: • for optimum performance, allow 20 minutes for warm-up. • adjust the monitor height so that the top of the screen is at or slig...
13 monitor accusync™ lcd200vx notes specifications monitor lcd module diagonal : 20.1 inch active matrix; thin film transistor (tft) viewable image size : 20.1 inch liquid crystal display (lcd); 0.255 mm dot native resolution (pixel count) : 1600 x 1200 pitch; 250cd/m 2 white luminence; 400:1 contra...
14 features reduced footprint: provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. Accucolor ® control systems: six co...
15 troubleshooting no picture • the signal cable should be completely connected to the display card/computer. • the display card should be completely seated in its slot. • check the vacation switch should be in the on position. • front power switch and computer power switch should be in the on posit...
16 references nec-mitsubishi monitor customer service & support customer service and technical support: (800) 632-4662 fax: (800) 695-3044 parts and accessories/macintosh cable adapter: (888) nec-mits [888-632-6487] customer service policies & processes: http://www.Necmitsubishi.Com/ css/servicepoli...
17 limited warranty nec-mitsubishi electronics display of america, inc. (hereinafter “nmd-a”) warrants this product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at nmd-a’s sole option) any part of the enclosed unit w...
18 tco’99 congratulations! You have just purchased a tco’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally a...
19 tco’99 –continued accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. Tco’99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound ch...
20 aslcd200vxmanual062204.P65 6/23/04, 8:42 am 20
21 afin d’Éviter tout risque d’incendie ou d’Électrocution, ne pas exposer cet appareil À la pluie ou À l’humiditÉ. Ne pas utiliser la fiche d’alimentation polarisÉe avec une prise de cordon de rallonge ou autre prise sauf si les broches peuvent Être entiÈrement introduites. Ne pas ouvrir le boÎtier...
22 accusync tm lcd200vx la boîte* de votre nouveau moniteur nec accusync™ contient : • moniteur accusync lcd200vx avec sa base ajustable en hauteur • cordon d'alimentation • câble pour le signal vidéo • manuel de l’utilisateur • un cache-câbles * ne pas oublier de conserver la boîte et le matériel d...
23 pour raccorder le moniteur lcd au système,suivez les directives ciaprès: 1. Mettez l’ordinateur hors tension. 2. Pour un pc ou un mac équipé d’une sortie numérique dvi: branchez le câble dvi-d -dvi-d (non fourni) au connecteur de la carte graphique de votre ordinateur (figure a.1). Serrez toutes ...
24 mise en marche rapide (suite) input1 (d-sub) input2 (dvi) figure c.1 figure d.1 bouton d’alimentation interrupteur de vacances un cache-câbles input1 (d-sub) input2 (dvi) aslcd200vxmanual062204.P65 6/23/04, 8:42 am 24.
25 mise en marche rapide (suite) levez et baissez l’écran du moniteur pour lever ou baisser l’écran, placez les mains de chaque côté du moniteur et positionnez-le à la hauteur de votre choix. (figure rl.1). Nota: manipule sur soin quand augmentant ou l’écran diminuant écran. Figure rl.1 pivoter plac...
26 figure s.2 mise en marche rapide (suite) enlevez le support du moniteur pour le montage pour préparer le moniteur à des fins de montage différents : 1. Débranchez tous les câbles. 2. Placez les mains de chaque côté du moniteur en le soulevant dans sa position la plus haute. 3. Placez le moniteur ...
27 mise en marche rapide (suite) ce moniteur lcd a été conçu pour être utilisé avec un bras flexible. Utiliser les vis fournies (4pièces) lors de l’installation comme indiqué sur la figure. Le moniteur doit être installé sur un bras garantissant la stabilité nécessaire correspondant au poids du moni...
28 menu principal exit quitte les commandes osm. Revient au menu principal osm. > déplace la zone en surbrillance vers la gauche ou la droite pour choisir un menu de commande. Déplace la zone en surbrillance vers le haut ou vers le bas pour choisir l’une des commandes. – /+ déplace la barre vers la ...
29 système de contrôle des couleurs accucolor ® six colore prérégle sélectionner la désiré couleur mettant (srgb et native couleur prérégle sommes standards et cannot être transformé). R, v, b: augmente ou diminue le niveau des couleurs rouge, vert ou bleu, suivant celui qui a été sélectionné. Le ch...
30 commandes (suite) fenêtre s’ouvrira a l’écran et vous indiquera que les r´églages ne sont pas accessibles. Pour verrouiller, appuyer sue les touches select et “+” simultanément. Pour déverrouiller, appuyer sur les touches select et “+” simultanément. Erreur resolution: la résolution optimale est ...
31 usage recommandé consignes de sécurité et d’entretien pour un fonctionnement optimal, priÈre de noter ce qui suit pour le rÉglage et l'utilisation du moniteur couleur accusync™ lcd : • ne pas ouvrir le moniteur. Aucune pièce intérieure ne nécessite l'intervention de l'utilisateur, et l'ouverture ...
32 la modification de la position et du rÉglage du moniteur peut rÉduire la fatigue des yeux, des Épaules et de la nuque. Observer les directives ci-aprÈs lors du positionnement du moniteur : usage recommandé (suite) • pour une performance optimale, laissez le moniteur se réchauffer pendant 20 minut...
33 caractér. Techn. Moniteur remarques du moniteur accusync™ lcd200vx module lcd diagonale : 20,1 po matrice active; transistor à film fin (tft); surface utile : 20,1 po affichage à cristaux liquides (lcd); résolution (nombre de pixels) : 1600 x 1200 pas 0,255 mm; luminance blanche 250cd/m 2 ; taux ...
34 fonctions encombrement réduit : constitue la solution idéale pour les environnements qui nécessitent une image de haute qualité et un encombrement et un poids limités. L’encombrement réduit et le faible poids du moniteur permettent de le déplacer ou de le transporter rapidement d’un point à un au...
35 dépannage pas d'image • le câble vidéo doit être bien connecté à la carte d'affichage et à l’ordinateur. • la carte d'affichage doit être insérée à fond dans son logement. • vérifiez que l’interrupteur de vacances soit sur la position marche. • les interrupteurs d’alimentation du moniteur à l’ava...
36 références service à la clientèle et assistance technique du moniteur mec-mitsubishi service à la clientèle et assistance technique: (800) 632-4662 télécopieur: (800) 695-3044 pièces et accessoires/adaptateur de câble macintosh: (888) nec-mits [888-632-6487] politiques et processus du service à l...
37 garantie limitée nec-mitsubishi electronics display of america, inc. (ci-après «nmd-a») garantit que ce produit est exempt de vice de fabrication et de main-d’oeuvre et, selon les conditions énoncées ci-dessous, accepte de réparer ou remplacer, à sa discrétion, toute pièce de l’appareil concerné ...
38 tco’99 (c’est une traduction de portion anglaise de tco’99.) félicitations! Vous avez acheté un produit qui répond à la directive tco’99. En choisissant ce produit conçu pour une utilisation professionnelle, vous contribuez aussi à la réduction des effets nuisibles sur l’environnement et aussi au...
39 tco’99 (suite) organiquement liés. Les retardateurs de flame sont autorisés dans les cartes à circuits imprimés étant donné qu’aucun substitut n’est encore disponible. Plomb** le plomb peut être présent dans les tubes cathodiques, les écrans, les soudures et les condensateurs. Le plomb s’attaque ...
40 aslcd200vxmanual062204.P65 6/23/04, 8:42 am 40
Avis de propri É t É exclusive et de d É gagement de responsabilit É les informations contenues dans ce document, y compris tous les designs et matériel s'y rapportant, sont la propriété de nec-mitsubishi electronics display of america et/ou ses concédants. Nec-mitsubishi electronics display of amer...
Proprietary notice and liability disclaimer the information disclosed in this document, including all designs and related materials, is the valuable property of nec- mitsubishi electronics display of america and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary ri...