1. DL manuals
  2. NEC
  3. TV
  4. ASPV32-AVT - AccuSync - 32" LCD TV
  5. Setup

NEC ASPV32-AVT - AccuSync - 32" LCD TV Setup

Other manuals for ASPV32-AVT - AccuSync - 32" LCD TV: Brochure, User Manual, Specification Sheet, Reference Manual, Specifications, Brochure
Manual is about: Nec User's Manual LCD Color Monitor PV32, PV40, PV46

Summary of ASPV32-AVT - AccuSync - 32" LCD TV

  • Page 1

    Accusync pv series external control device setup service y pb pr component in (l) audio (r) s-video in rs-232 1 2 3 8 7 6 4 5 connect the rs-232 input jack to a control device (such as a computer or an a/v control system) in order to control the set’s functions externally. Rj-45 8pin connector conne...

  • Page 2

    External control device setup hyper terminal setting 1. Run ‘start > programs > accessories > communications > hyper terminal’. 2. Enter a name and chose an icon for the connection. 2.

  • Page 3

    External control device setup hyper terminal setting 3. Enter your serial(rs-232) port number. (for example, ‘set to com1, com2 or etc.) 4. Set up the port setting as below - bits per second : 9600 - data bits : 8 - parity : none - stop bits : 1 - flow control : none then click ‘ok’. 3.

  • Page 4

    External control device setup hyper terminal setting 3. Open ‘file > properties’. 4. Chose the ‘setting’ tab and click the ‘ascii setup’ button as following image. 4.

  • Page 5

    External control device setup hyper terminal setting 3. Check the following items in the ‘settings’ tab as below. - ‘send line ends with line feeds’ - ‘echo typed characters locally’ - ‘append line feeds to icomming line ends’ - ‘wrap lines that exceed terminal width’ set id press the menu button an...

  • Page 6

    Data(hex) 01. Power k a 0~1 02. Input select k b 0~8(32"), 0~9(40", 46") 03. Aspect ratio k c 0~5(tv~svideo), 0~1(dtv, com~hdmi3) 04. Volume mute k d 0~1 05. Screen mute k e 0~1 06. Contrast k f 0~64 07. Brightness k g 0~64 08. Color k h 0~64 09. Tint k i 0~64 10. Sharpness k j 0~64 11. Csm k k 0~3 ...

  • Page 7

    External control device setup 01. Power (command 2 : a) to control power on/off of the set transmission data 0 : power off 1 : power on [k][a][ ][set id][ ][data][cr] ok acknowledgement [a][ ][set id][ ][ok][data][x] to show power on/off transmission [k][a][ ][set id][ ][ff][cr] [a][ ][set id][ ][ok...

  • Page 8

    External control device setup 07. Brightness (command 2 : g) to adjust screen brightness. You can also adjust brightness in the picture menu. Transmission data min : 0 ~ max : 64 * refer to 'real data mapping’. See page 52. [k][g][ ][set id][ ][data][cr] ok acknowledgement [g][ ][set id][ ][ok][data...

  • Page 9

    Hsi lg ne external control device setup 14. Pip mode (command 2 : n) to select pip mode. You can also adjust pip mode in the main/pip menu. Transmission data 0 : off 2 : pop 4 : dw2 1 : pip 3 : dw1 * refer to 'real data mapping’. See page 52. Ok acknowledgement [k][n][ ][set id][ ][data][cr] [n][ ][...

  • Page 10

    10 external control device setup * real data mapping 0 : step 0 1 : step 1 2 : step 2 3 : step 3 4 : step 4 5 : step 5 6 : step 6 7 : step 7 8 : step 8 9 : step 9 a : step 10 b : step 11 c : step 12 d : step 13 e : step 14 f : step 15 10 : step 16 11 : step 17 12 : step 18 13 : step 19 14 : step 20 ...