NEC DT750 User Manual - page 62
1.
56
Check Points
Actions
Download file is not placed
in the specified directory.
Place the download file in
the specified directory.
A different file name is
specified between DT750
and FTP/TFTP server.
Set the same file name
from both DT750 and FTP/
TFTP server.
Incorrect IP address of
FTP/TFTP server has been
entered from the
telephone.
Set the proper IP address
of FTP/TFTP server.
The power to FTP/TFTP
server or network
equipment is OFF.
Turn on the power.
LAN cable is disconnected.
Reconnect the cable
securely.
When changing the file name, go to the next
step (STEP 19).
When not changing the file name, go to
STEP 20.
the display changes as follows:
STEP 21:Press BK soft key once to delete the default
file name and then enter a new file name by
using the digit keys.
Download Complete!
Exit
Note:
For details on character entry method, see
LAST
NUMBER REDIAL
in chapter 4 Basic Operation.
Note:
A maximum of 20 characters ("0-9", "A-Z", "a-z",
"*", "#", ".", "-" or "_") can be entered as a file
name.
Note:
To delete an entered character, press BK soft
key.
Reset the DT750 by pressing Exit soft key.
Note:
When the downloading process ends in failure,
"Downloading Failed!" is displayed on the LCD.
Check to see the following and then make a retry.
STEP 22:Press
(Enter)
or Exec soft key to start the
downloading process. While downloading a
file, the LCD displays
“Downloading...” first
and then
“Saving...”.
Note:
Be sure not to turn OFF the DT750 while "Sav-
ing..." is displayed on the LCD.
STEP 23:After the downloading process is complete,