- DL manuals
- NEC
- Monitor
- E222W - MultiSync - 22" LCD Monitor
- User Manual
NEC E222W - MultiSync - 22" LCD Monitor User Manual
Summary of E222W - MultiSync - 22" LCD Monitor
Page 1
Multisync e222w user’s manual.
Page 2: Index
Index warning, caution ......................................................................................................................... English-1 registration information ............................................................................................................... English-...
Page 3: Registration Information
English english-1 warning caution caution: to reduce the risk of electric shock, make sure power cord is unplugged from wall socket. To fully disengage the power to the unit, please disconnect the power cord from the ac outlet. Do not remove cover (or back). No user serviceable parts inside. Refer s...
Page 4
English-2 canadian department of communications compliance statement doc: this class b digital apparatus meets all requirements of the canadian interference-causing equipment regulations. C-ul: bears the c-ul mark and is in compliance with canadian safety regulations according to can/csa c22.2 no. 6...
Page 5: Recommended Use
English english-3 recommended use safety precautions and maintenance for optimum performance, please note the following when setting up and using the multisync lcd colour monitor: • do not open the monitor. There are no user serviceable parts inside and opening or removing covers may expose you to d...
Page 6
English-4 correct placement and adjustment of the monitor can reduce eye, shoulder and neck fatigue. Check the following when you position the monitor: • for optimum performance, allow 20 minutes for warm-up. • adjust the monitor height so that the top of the screen is at or slightly below eye level...
Page 7: Contents
English english-5 contents your new nec multisync lcd monitor box* should contain the following: • multisync lcd monitor with tilt/swivel/pivot/height adjust base • power cord • base stand • video signal cable (15-pin mini d-sub male to 15-pin mini d-sub male) • video signal cable (dvi-d to dvi-d) •...
Page 8: Quick Start
English-6 quick start to attach the base to the lcd stand: 1. Place monitor face down on a non-abrasive surface (figure 1). Note: handle with care when monitor facing down, for avoiding damage to the front control buttons. 2. Please pivot base 90 degrees as shown in figure 1. Note: handle with care ...
Page 9
English english-7 figure c.1 power button figure rl.1 raise and lower monitor screen the monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (figure rl.1). Note: handle with care when raising or lowering the moni...
Page 10
English-8 remove monitor stand for mounting to prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place monitor face down on a non-abrasive surface (figure s.1). Note: handle with care when monitor facing down, for avoiding damage to the front control buttons. 3. Remov...
Page 11
English english-9 7. Reverse this process to re-attach stand. Note: use only vesa-compatible alternative mounting method. Handle with care when removing stand. Note: match “top side” mark on stand to top side of the monitor head when re-attaching stand. Flexible arm installation this lcd monitor is ...
Page 12: Controls
English-10 menu open osd main menu. Exits the osd controls. Exits to the osd main menu. Button menu controls osd (on-screen display) control buttons on the front of the monitor function as follows: to access osd menu, press any of the control buttons (menu, left, right, down, up). To change signal i...
Page 13
English english-11 image controls (analog input only) left / right controls horizontal image position within the display area of the lcd. Down / up controls vertical image position within the display area of the lcd. H.Size adjusts the horizontal size by increasing or decreasing this setting. Fine i...
Page 14
English-12 information the information menu indicates the current input, display resolution, horizontal and vertical frequency, and polarity settings of the monitor. The model and serial numbers of your monitor are also indicated. Carbon savings: display the estimated carbon saving information in kg...
Page 15: Specifications
English english-13 specifications monitor specifications multisync e222w notes lcd module diagonal: 55.9 cm/22.0 inches active matrix; thin film transistor (tft) liquid viewable image size: 55.9 cm/22.0 inches crystal display (lcd); 0.282 mm dot pitch; native resolution (pixel count): 1680 x 1050 25...
Page 16: Features
English-14 features thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal- clear text deliver a comfortable viewing experience. No touch auto adjust automatically adjusts your optimal image settings upon initial power-on. Colo...
Page 17: Troubleshooting
English english-15 troubleshooting no picture • the signal cable should be completely connected to the display card/computer. • the display card should be completely seated in its slot. • front power switch and computer power switch should be in the on position. • check to make sure that a supported...
Page 18: Tco Displays 5.0
English-16 tco displays 5.0 congratulations! This display is designed for both you and the planet! The display you have just purchased carries the tco certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental req...
Page 19
English english-17 nec display solutions is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help ...