NEC E323 User Manual - Product Specification

Other manuals for E323: Specifications, Brochure, Dimensional Drawing
Manual is about: User's Manual

Summary of E323

  • Page 1

    User’s manual e553 e463 e423 e323.

  • Page 2: Www.Necdisplaysolutions.Com

    English-1 www.Necdisplaysolutions.Com index precautions and reminders english-1 important safety instructions english-2 safety instructions ...

  • Page 3: Precautions And Reminders

    English-1 english precautions and reminders do not place the display in confined spaces or in a box when in use maintain ample ventilation for the display when in use do not open the display cabinet call a nec certified service personnel for any internal service needed for your display keep the ...

  • Page 4

    English-3 english-2 important safety instructions read before operating equipment follow all warnings and instructions marked on this display 1 read these instructions 2 keep these instructions 3 heed all warnings 4 follow all instructions 5 do not use this apparatus near water 6 clean o...

  • Page 5

    English-3 english-2 english 15 the display complies with the recommended safety standards for stability do not put excessive force on the front or top of the cabinet this could cause the product to tip over and cause damage and/or personal injury 16 if monitor or glass is broken, do not come in...

  • Page 6

    English-5 english-4 power source this lcd display operates on 120 volts 60 hz, ac current insert the power cord into a 120 volts 60 hz outlet the mains plug is used as the disconnect device and shall remain readily operable to prevent electric shock from the display, do not use with an extension ...

  • Page 7: Safety Instructions

    English-5 english-4 english safety instructions fcc statement this equipment has been tested and found to comply with the limits for a class ii digital device, pursuant to part 15 of the fcc rules these limits are designed to provide reasonable protection against harmful interference in a residenti...

  • Page 8: Important Information

    English-7 english-6 important information warning to prevent fire or shock hazards, do not expose this unit to rain or moisture also, do not use this unit’s polarized plug with an extension cord receptacle or other outlets unless the prongs can be fully inserted refrain from opening the cabinet as...

  • Page 9

    English-7 english-6 english batteries installed warning caution - danger of explosion if batteries are incorrectly replaced replace only with the same or equivalent type the batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Caution: these servicing instructions a...

  • Page 10

    English-9 english-8 installed with stand 4 inches 10 cm 4 inches 10 cm leave at least this space around the set. 11 7/8 inches 30 cm 4 inches 10 cm never install the display set where air-circulation is blocked objects and ventilation holes never push objects of any kind into the display through th...

  • Page 11: Declaration of Conformity

    English-9 english-8 english declaration of conformity this device complies with part 15 of fcc rules operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may c...

  • Page 12

    English-11 english-10 3 following procedures: • reorient or relocate the receiving display • increase the separation between the equipment and display • connect the equipment into a different outlet than the receiver • consult your dealer or an experienced radio/display technician for assistance...

  • Page 13: Preparation

    English-11 english-10 english preparation important: do not apply pressure to the screen display area which may compromise the integrity of the display the manufacturer’s warranty does not cover user abuse or improper installations attaching the base e553/e463/e423 e323 1 place the display face d...

  • Page 14: Mounting(Optional)

    English-13 english-12 preparing your lcd display for wall mounting(optional) we suggest that you keep your display at least 2 36 inches (60 mm) from the wall to prevent cable interference before mounting your display on the wall, you need to remove the base for your safety, only mount with a ul li...

  • Page 15: Antenna Connection

    English-13 english-12 english place the display on a solid surface ensure that the lcd display is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover do not place the display near any open flames. Do not allow the display to be placed in an enviro...

  • Page 16

    English-15 english-14 battery installation and replacement the remote control is powered by two 1 5v aaa batteries to install or replace batteries: 1 open the battery cover of the remote control by pushing and pulling it in the direction of the arrow 2 insert two new “aaa” size batteries for the...

  • Page 17: Connect to The Power Source

    English-15 english-14 english connect to the power source the display should be installed close to an easily accessible power outlet fully insert the prongs into the power outlet socket a loose connection may cause image degradation if there is power to the display, the front led at the bottom of...

  • Page 18: Source Connection Guide

    English-17 english-16 source connection guide ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ ac power 1 spdif - use a digital audio cable to connectstereo home theater system 2 component/av in – connect digital video equipment to the video green (y), blue (pb), red (pr) jacks, and matching audio white (l) and red (r) jacks 3 ...

  • Page 19: Rs-232C Port Specifications

    English-17 english-16 english rs-232c port specifications pc control of the display attach an rs-232c cable cross-type (commercially available) to the supplied din/d-sub rs-232c for the connections note: this operation system should be used by a person who is accustomed to using computers communic...

  • Page 20: Operating Instructions

    English-19 english-18 operating instructions using the side panel controls 1 menu press to open or exit the osd (on-screen display) menu 2 input press to select the input source 3 vol + press to increase the volume press this key to shift right in the osd menu 4 vol - press to decrease the v...

  • Page 21: Using The Remote Control

    English-19 english-18 english using the remote control power press to turn on/off (standby) the power (note: to completely turn off the power, unplug the ac cord from the power outlet ) tv press to choose atsc/ntsc tuner source mode av press to choose composite source mode comp press to choose co...

  • Page 22: Timing Table

    English-21 english-20 color buttons follow the on-screen instruction to operate mts press to activate the ntsc tuner sounds such as stereo, sap, mono- tone, and languages of the digital tuner wide press to choose the display aspect ratio: normal/zoom/wide/cinema/ auto (ratio availability varies by...

  • Page 23: Video Menu

    English-21 english-20 english navigating the on-screen menu press the menu button to display and exit to close the main menu use the navigation ring to navigate, select, adjust or confirm an item on the osd (on screen display) menu note: some features may only be available in a particular source m...

  • Page 24: Audio Menu

    English-23 english-22 audio menu the audio menu provides an audio adjustment for user to modify the audio setting exit ok menu video audio channels setup photos sound mode adjust settings to affect sound quality. Standard balance 0 advanced audio reset audio settings move select return exit 1 soun...

  • Page 25: Setup Menu

    English-23 english-22 english 7 auto aspect automatically adjust the picture aspect ratio according to the tv program setup menu the setup menu in tv mode is shown below according to various requirements in different source modes, certain features could be hidden (disabled) on the menu exit ok m...

  • Page 26: Photos Menu

    English-25 english-24 5 input labels-- only for non tv input create labels for the devices connected to your display 6 rgb options only available for vga input, and when there is vga signal input [auto adjust] automatically adjusts the image settings such as position [h-position] adjusts horizo...

  • Page 27

    English-25 english-24 english to control while in full-screen photo show: • press right to go to the next image press left to go to the previous image • press ok to rotate the image clockwise when press enter to rotate the photo, the rotation situation will change to zoom fill style • press wide...

  • Page 28: Tips

    English-27 english-26 tips care of the screen do not rub or strike the screen with anything hard as this may scratch, mar, or even damage the screen permanently unplug the power cord before cleaning the screen dust the display by wiping the screen and the cabinet with a soft, clean cloth if the s...

  • Page 29: Product Specification

    English-27 english-26 english product specification this model complies with the specifications listed below. Reorient or relocate the receiving display designs and specifications are subject to change without notice. This model may not be compatible with features and/or specifications that may be ...

  • Page 30

    English-29 english-28 model name e323 e423 e463 e553 wall mounting vesa-compatible wall bracket (w x h) 200 x 100 mm 400 x 400 mm 400 x 400 mm 400 x 400 mm screw type metric 4 x 18 mm metric 6 x 18 mm metric 6 x 18 mm metric 6 x 18 mm power power consumption 51 w 81 w 107 w 135 w standby power ac 12...

  • Page 31: Before Calling Service

    English-29 english-28 english before calling service please make these simple checks before calling service these tips may save you time and money as charges for receiver installation and adjustments of customer controls are not covered under your warranty symptoms items to check and actions to fo...

  • Page 32: Glossary

    English-31 english-30 glossary hdtv hdtv displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines hdmi inputs high-definition multimedia interface audio / video inputs are located on the rear of the receiver these connectors are used for the inpu...

  • Page 33: Limited Warranty

    English-31 english-30 english limited warranty nec display solutions of america, inc (hereinafter “nec display solutions”) warrants this product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at nec display solutions’...

  • Page 34: References

    English-32 english-32 references nec monitor customer service & support customer service and technical support parts and accessories (800) 632-4662 (888) 634-4662 fax (800) 695-3044 warranty information www necdisplay com online technical support www necdisplay com sales and product information sale...