Summary of EA273WM-BK
Page 1
Multisync ea273wm user’s manual.
Page 2: Index
Index warning, caution ..........................................................................................................................English-1 canadian department of communications compliance statement .............................................English-2 declaration of conformity ........
Page 3
English-1 english warning caution caution: to reduce the risk of electric shock, make sure power cord is unplugged from wall socket. To fully disengage the power to the unit, please disconnect the power cord from the ac outlet.Do not remove cover (or back). No user serviceable parts inside. Refer se...
Page 4: Compliance Statement
English-2 canadian department of communications compliance statement doc: this class b digital apparatus meets all requirements of the canadian interference-causing equipment regulations. C-ul: bears the c-ul mark and is in compliance with canadian safety regulations according to can/csa c22.2 no. 6...
Page 5: Contents
English-3 english contents your new nec monitor box* should contain the following: • multisync monitor with tilt/swivel/pivot/height adjust stand • power cord* 1 • video signal cable (dvi-d to dvi-d cable) • video signal cable (mini d-sub 15 pin to mini d-sub 15 pin) • usb cable • audio cable (ø 3.5...
Page 6: Quick Start
English-4 quick start to connect the lcd monitor to your system, follow these instructions: note: make sure to read “recommended use” (page 15) before installation. 1. Turn off the power of your computer. 2. For a pc or mac with dvi digital output: connect the dvi signal cable to the connector of th...
Page 7
English-5 english 5. To keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the cables in the hooks fi rmly and evenly (figure c.2 and figure c.3). Note: cable cover is not removable. 6. Please check that you can still rotate, raise and l...
Page 8
English-6 raise and lower monitor screen the monitor may be raised or lowered in either portrait or landscape mode. To raise or lower screen, place a hand on each side of the monitor and lift or lower to the desired height (figure rl.1). Note: handle with care when raising or lowering the monitor sc...
Page 9
English-7 english flexible arm installation this lcd monitor is designed for use with a fl exible arm. To prepare the monitor for alternate mounting purposes: • follow the instructions provided by the manufacturer of the display mount. • to meet the safety requirements, the mounting stand must be ab...
Page 10
English-8 mount flexible arm this lcd monitor is designed for use with a fl exible arm. 1. Follow the instructions on how remove monitor stand for mounting to remove the stand. 2. Use the 4 screws removed from the stand to attach the arm to the monitor (figure f.1). Caution: use only the screws (4 p...
Page 11: Controls
English-9 english controls osd (on-screen display) control keys on the front of the monitor function are as follows: to access osd menu, touch any of the control keys. To change signal input, touch the select key. Note: exit osd in order to change signal input. 1 ambibright sensor human sensor detec...
Page 12
English-10 auto brightness off: no function. (auto brightness) 1: automatically adjusts the brightness to the optimal setting by detecting the brightness level of the environment* 1 . *1: please refer to page 21 for full “auto brightness” information. (auto brightness) 2: automatically adjusts the b...
Page 13
English-11 english screen (analog input only) auto adjust automatically adjusts the image position, h. Size and fine settings. Auto contrast adjusts the image displayed for non-standard video inputs. Left / right controls horizontal image position within the display area of the lcd. Down / up contro...
Page 14
English-12 tools volume controls the volume of the speakers or headphones. To mute the speaker output, touch the “reset/eco mode” key. Sound input (hdmi, displayport inputs only) this function selects audio input, hdmi or displayport. Video level (hdmi input only) normal: disables the expanded featu...
Page 15
English-13 english hot key when this function is activated, eco mode, brightness and volume can be adjusted without entering the osd menu by using the front keys. On: the “eco” touch key on the bezel is enabled and can toggle among eco settings. The left/right key adjusts the brightness level. The u...
Page 16
English-14 osd warning osd warning menus disappear when exit is selected. No signal: this function gives a warning when there is no horizontal or vertical sync. After power is turned on or when there is a change of input signal, the no signal window will appear. Out of range: this function gives a r...
Page 17: Recommended Use
English-15 english recommended use safety precautions and maintenance for optimum performance, please note the following when setting up and using the lcd color monitor: • do not open the monitor. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous s...
Page 18
English-16 correct placement and adjustment of the monitor can reduce eye, shoulder and neck fatigue. Check the following when you position the monitor: • for optimum performance, allow 20 minutes for the display to warm up. • adjust the monitor height so that the top of the screen is at or slightly...
Page 19: Specifi Cations
English-17 english specifi cations monitor specifi cations multisync ea273wm notes lcd module diagonal: viewable image size: native resolution (pixel count): 68.57 cm/27.0 inches 68.57 cm/27.0 inches 1920 x 1080 active matrix; thin fi lm transistor (tft) liquid crystal display (lcd); 0.311 mm dot pi...
Page 20: Features
English-18 features displayport: displayport is designed to be the future-ready and scalable solution for high performance digital display connectivity. It enables the highest resolutions, the fastest refresh rates and deepest color depths over standard cables. Hdmi: hdmi is designed to be the futur...
Page 21: Troubleshooting
English-19 english troubleshooting no picture • the signal cable should be completely connected to the display card/computer. • the display card should be completely seated in its slot. • the monitor does not support displayport converter signal. • front power switch and computer power switch should...
Page 22
English-20 no sound • make sure the speaker cable is proper connected. • check to see if mute is activated. • check the volume in the osd menu. • check selected osd’s tools to “sound input”, when displayport or hdmi is in use. Brightness variations over time • change auto brightness to off and adjus...
Page 23
English-21 english using the auto brightness function the brightness of the lcd screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordi...
Page 24: Controlsync
English-22 controlsync connect the master monitor with a sub monitor via a controlsync cable (ø 2.5) into controlsync in/out. When the setting of the master monitor is adjusted, it will be sent to the connected sub monitor(s) automatically. Up to 5 sub monitors can be daisy chained via controlsync. ...
Page 25: Tco Displays 5
English-23 english tco displays 5 congratulations! This display is designed for both you and the planet! The display you have just purchased carries the tco certiÞ ed label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environment...
Page 26
English-24 nec display solutions is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help defi ne ...