NEC FlexATX Chassis Disassembly Manual - Removing The Front Usb Panel
of
8
Disassembly and Reassembly - 6
Fig. 7: Freeing the hard disk drive bay
3. Slide the hard disk drive bay sidewise to free it from the
latches on the bottom of the chassis.
Fig. 8: Latches on the bottom o f the chassis
4. Remove the screws that hold the hard disk drive to its
bay.
Fig. 9: Hard disk drive screws
Removing the front USB panel
To remove the front USB panel, first open the chassis (see
Opening the Chassis), remove the front panel (see Removing
the Front Panel) and perform the next steps:
1. Disconnect the USB cable and the LEDs cable from the
motherboard.
2. Remove the screws holding the USB panel in place.
Fig. 10: Removing the USB panel screws
B
C
D