1. DL manuals
  2. NEC
  3. Telephone Accessories
  4. G355
  5. User Manual

NEC G355 User Manual - Calendar

Manual is about: business mobility (ip) dect

Summary of G355

  • Page 1

    Business mobility (ip) dect dect g355, g955 and i755 handsets user guide.

  • Page 2

    2.

  • Page 3: Disclaimer

    Disclaimer nec philips unified solutions reserves the right to revise or make changes or improvements to the products described in the user manual or to this user manual itself at any time without obligation to notify any person of such revision or improvements. The pictures, icons, screen shots and...

  • Page 4

    4.

  • Page 5: Revision History

    Revision history 5 revision history june, 2008 creation of the user manual for the g355 and g955 dect handsets. User manual based on software version 1.30 july, 2008 new features of feature pack 1 added: o possible to select sending a message to a central directory contact. O introduction of proxy p...

  • Page 6: Revision History

    Revision history 6.

  • Page 7: Contents

    Contents 7 contents disclaimer ........................................................................ 3 revision history .............................................................. 5 contents ........................................................................... 7 introduction ...............

  • Page 8: Contents

    Contents 8 display areas and handset controls ............................. 32 icon line ..................................................................................... 33 dialogue area ............................................................................ 34 idle mode......................

  • Page 9: Contents

    Contents 9 accessing voice mail ................................................................. 66 defining a voice mail number .................................................... 67 by entering number: ........................................................................... 68 by looking up c...

  • Page 10: Contents

    Contents 10 accessing the messaging menu ................................................. 93 saving a new message or editing a draft .................................... 94 sending a new message or draft ................................................ 95 deleting a draft .............................

  • Page 11: Contents

    Contents 11 deleting an appointment .......................................................... 122 additional features .......................................................124 using the calculator ....................................................124 using the stopwatch ............................

  • Page 12: Contents

    Contents 12 assigning confirmation sound .................................................. 163 enabling the coverage warning feature .................................... 164 enabling the charger warning feature ....................................... 165 defining the missed call time..................

  • Page 13: Contents

    Contents 13 bluetooth module installation ................................................... 205 installing the bluetooth module on your g955 or i755 dect handset ......................................................................................................... 205 removing the bluetooth mod...

  • Page 14: Contents

    Contents 14.

  • Page 15: Introduction

    Introduction 15 introduction nec philips digital enhanced cordless telecommunications (dect) g355, g955 and i755 handsets are cordless phones with enhanced features suitable for office use. The handsets include a single-press sos key used to make one-touch calls or send messages to a particular cont...

  • Page 16: Introduction

    Introduction 16 rely exclusively on cordless telephones when making indispensable calls (such as medical emergencies). Use of the i755 in environments with metal particles the i755 dect handset makes use of inductive charging. Because of this the i755 is at some places very magnetic and it will ther...

  • Page 17: Introduction

    Introduction 17 for i755” for the g355/g955 resp. The i755 handset. Do not use any other type. Never disassemble, customize or short-circuit batteries. Do not place battery in fire or heat the battery. Sensitive electronic environment any radio-based equipment can potentially cause interference with...

  • Page 18: Introduction

    Introduction 18 electrical and electronic products via the general municipal waste stream. In order to facilitate separate disposal and environmentally sound recycling, arrangements have been made for local collection and recycling. In case your electrical and electronic products need to be disposed...

  • Page 19: Introduction

    Introduction 19 eesti käesolevaga kinnitab “nec philips unified solutions” seadme “g355/g955” vastavust direktiivi 1999/5/eÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Http://www.Nec-philips.Com/doc english hereby, “nec philips unified solutions”, declares t...

  • Page 20: Introduction

    Introduction 20 lietuvių Šiuo “nec philips unified solutions” deklaruoja, kad šis “g355/g955” atitinka esminius reikalavimus ir kitas 1999/5/eb direktyvos nuostatas. Http://www.Nec-philips.Com/doc malti hawnhekk, “nec philips unified solutions”, jiddikjara li dan “g355/g955” jikkonforma mal- ħtiġiji...

  • Page 21: Introduction

    Introduction 21 slovensky “nec philips unified solutions” týmto vyhlasuje, ţe “g355/g955” spĺňa základné poţiadavky a všetky príslušné ustanovenia smernice 1999/5/es. Http://www.Nec-philips.Com/doc suomi “nec philips unified solutions” vakuuttaa täten että “g355/g955” tyyppinen laite on direktiivin ...

  • Page 22: Introduction

    Introduction 22 reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help.” modifi...

  • Page 23: Introduction

    Introduction 23 regulatory information united states interference information: this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, incl...

  • Page 24: Introduction

    Introduction 24 bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This product has been shown to...

  • Page 25: Getting Started

    Getting started 25 getting started this section describes the tasks you must complete before you use your handset. Install the accessories as described in the following sections: installing the battery pack (page 25) installing the charger (page 27) charging the batteries (page 28) charge display (p...

  • Page 26: Getting Started

    Getting started 26 attention: when your d ect handset doesn‟t work (including not charging the battery pack when the dect handset is put on the charger) after installation of a new battery pack the possible cause could be that no good contact is made between battery pack and the dect handset. Please...

  • Page 27: Getting Started

    Getting started 27 figure 2: installing the i755 battery pack installing the charger to install the charger, perform the following steps: 1. Place the charger on a flat surface. 2. Connect the ac adapter cable to the terminal at the back of the charger. 3. Connect the adapter to an electrical outlet...

  • Page 28: Getting Started

    Getting started 28 figure 3: g355, g955 and i755 in desktop charger charging the batteries place the handset in the charger as shown in figure 3. Attention: the handset, if switched off, automatically switches on when placed in the charger. Alternatively the i755 desktop charger can be used to charg...

  • Page 29: Getting Started

    Getting started 29 charging guidelines observe the following guidelines when you charge your handset: charge the battery for at least 6 hours before you use the handset for the first time. Do not leave the handset connected to the charger for more than a month without using it. You can charge and di...

  • Page 30: Getting Started

    Getting started 30 warning the talk time and standby time are influenced by the use of the handset. Influencing these times are e.G., display activities, alerting, use of bluetooth, walking around a lot (causing many handovers), and so on. Caution do not install the charger, handset, and accessories...

  • Page 31: Getting Started

    Getting started 31 table 1: battery charge status icons icon description empty less than 33% more than 33% and less than 75% more than 75% warning your g355 or g955 dect handset displays the battery status accurately after charging for at least 6 hours. When removing and replacing the battery pack o...

  • Page 32: Getting Started

    Getting started 32 display areas and handset controls use the following figure to familiarise yourself with your dect handset. Figure 5: elements of the g355, g955 and i755 1. Volume up key 2. Volume down key 3. Sos key 4. Ok key 5. Off hook/enquiry (green) key 6. Headset jack connector 7. Microphon...

  • Page 33: Getting Started

    Getting started 33 this section describes the three areas of the display screen as shown in figure 6 and the key functions in the various operational modes of your g355, g955 or i755 dect handset. Icon line the icon line displays the status of the handset. The icons for the level of radio signal and...

  • Page 34: Getting Started

    Getting started 34 table 2: icon line icons icon description keypad locked activated alarm attention: this icon, if active, replaces the keypad locked icon. Missed calls ringer deactivated caller filter (only for g955 and i755 dect handset) attention: this icon, if active, replaces the ringer deacti...

  • Page 35: Getting Started

    Getting started 35 the name of the active profile the time and date if you leave the range of the dect system, a “no network” message appears on the display screen. If you activate the mandown feature on the i755 the name of the dect systems will be replaced by warning message “mandown on”. Figure 7...

  • Page 36: Getting Started

    Getting started 36 table 3: key functions in idle mode key description up key press the programmable up navigation key to access the shortcut assigned to it. The default shortcut assigned is the contacts menu. Down key press the programmable down navigation key to access the shortcut assigned to it....

  • Page 37: Getting Started

    Getting started 37 table 3: key functions in idle mode key description sos key long press the sos key to make an emergency call (if configured). Attention: you can make an emergency call with the sos key even if the keypad is locked. 1 Ŕ9 : : press the 1 –9 keys to enter predial mode. Long press the...

  • Page 38: Getting Started

    Getting started 38 the number and name (if available) of the calling party for an incoming call the number and name (if added to your contacts list) of the called party for an outgoing call the loudspeaker icon (if enabled) the microphone muted icon (if muted) the following table shows the icons in ...

  • Page 39: Getting Started

    Getting started 39 the following table describes the handset key functions in call mode. Table 5: key functions in call mode key description left soft key press the left soft key to select the item marked in the display. Press the left soft key silence to mute the ringer for an incoming call. Right ...

  • Page 40: Getting Started

    Getting started 40 table 5: key functions in call mode key description clear key press the clr key to end the call. Volume up key press the volume up key to increase the handset volume during a call. Volume down key press the volume down key to decrease the handset volume during a call. 0 Ŕ9,*,# : p...

  • Page 41: Getting Started

    Getting started 41 figure 8 shows the missed call(s) screen. The following table describes the handset key functions in dialogue mode. Table 6: key functions in dialogue mode key description left soft key press the left soft key to select the item marked in the display. Right soft key press the righ...

  • Page 42: Getting Started

    Getting started 42 figure 9 shows the main menu and the general settings screen. The following table describes the handset key functions in menu mode. Table 7: key functions in menu mode key description left soft key press the left soft key to select the item marked in the display. Right soft key pr...

  • Page 43: Getting Started

    Getting started 43 table 7: key functions in menu mode key description left key press the left key to move the cursor to the desired menu item (entry) or menu section. Right key press the right key to move the cursor to the desired menu item (entry) or menu section. Clear key press the clr key to ca...

  • Page 44: Getting Started

    Getting started 44 the following table describes the handset key functions in edit mode. Figure 10: contacts editing screens figure 11: date editing screen.

  • Page 45: Getting Started

    Getting started 45 table 8: key functions in edit mode key description left soft key press the left soft key to select the item marked in the display. Right soft key press the right soft key to select the item marked in the display. Up key press the up key to move the cursor in the text area. Down k...

  • Page 46: Getting Started

    Getting started 46 table 8: key functions in edit mode key description 0 Ŕ 9 : : press the 0 –9 keys one or more times to enter the digit (for example, to enter a number, date, time, or pin). Press the 0 –9 keys one or more times to enter a special character or a letter. For more information, see ta...

  • Page 47: Getting Started

    Getting started 47 the following table shows the key to press, (when the handset is in text mode) to insert letters, numbers, or symbols. Table 9: key functions in text mode key uppercase lowercase 1 1 £ $ ¥ € @ % & # § ^ 1 £ $ ¥ € @ % & # § ^ 2 a b c 2 Æ À Á Ä Å Ç a b c 2 æ à á ä å ç 3 d e f 3 È É ...

  • Page 48: Getting Started

    Getting started 48 for example, press the menu soft key, as shown figure 6 , to access the main menu. Locking or unlocking the keypad use the keypad lock feature to prevent accidental operation of the handset. When you receive an incoming call, the keypad temporarily unlocks so you can answer the ca...

  • Page 49: Dect System Configuration

    Dect system configuration 49 dect system configuration use the information in this section to configure your dect handset to work with a dect system. This section describes the following tasks: accessing the connectivity menu (page 49) subscribing the handset to a dect system (page 50) manually sele...

  • Page 50: Dect System Configuration

    Dect system configuration 50 subscribing the handset to a dect system you must subscribe the handset to at least one dect system before you can use the handset to make a call. The handset can operate with a maximum of four dect systems, for which the handset stores the name of the system in a subscr...

  • Page 51: Dect System Configuration

    Dect system configuration 51 4. Choose either empty (if there are less than eight subscriptions to the system on the handset) or the name of the system you would like to overwrite (here: dect01). 5. Press the select soft key. 6. Press the yes soft key. 7. Use the keypad: enter the park code at the p...

  • Page 52: Dect System Configuration

    Dect system configuration 52 prompt. 14. Press the save soft key. 15. Press the clr key one or more times to return to the idle display. Manually selecting the dect system if you subscribe the handset to more than one dect system, you can manually select which system the handset uses by performing t...

  • Page 53: Dect System Configuration

    Dect system configuration 53 1. Press the clr key one or more times to return to the idle display. Enabling automatic dect system selection if you subscribe the handset to several dect systems and you configure the automatic search function, the handset automatically selects the nearest system. As a...

  • Page 54: Dect System Configuration

    Dect system configuration 54 6. Press the clr key one or more times to return to the idle display. Terminating a subscription when terminating a dect subscription you will not be able to make calls over the dect system to which the subscription is related. Terminating all dect subscriptions means yo...

  • Page 55: Dect System Configuration

    Dect system configuration 55 editing the system name and phone number to edit the system name and phone number on your handset, perform the following steps: 1. Open the connectivity menu as shown in accessing the connectivity menu (page 49) . 2. Highlight the network select option. 3. Press the sele...

  • Page 56: Dect System Configuration

    Dect system configuration 56 10. Press the clr key one or more times to return to the idle display..

  • Page 57: Call Features

    Call features 57 call features attention: during a call, the display light switches off or dims to prevent a rapid battery discharge. To highlight the display: press the ok key. Make a call this section describes the features associated with making a call. You can make a call from your g355, g955 an...

  • Page 58: Call Features

    Call features 58 1. Use the keypad: enter the phone number (including any additional digits e.G., to get access to an outside line). 2. Press the call key. To edit a number in predial mode, perform the following steps: 1. Use the right or left key to move to the insertion point. 2. Use the keypad: e...

  • Page 59: Call Features

    Call features 59 using loudspeaker your handset includes a loudspeaker feature to allow several people in a room to listen to a call. Attention: the loudspeaker feature is no substitute for a conference bridge or a conference device. Always use such devices when high quality speech is required. To e...

  • Page 60: Call Features

    Call features 60 2. Highlight the contacts menu. 3. Press the select soft key. 4. Choose the private or the central directory option. 5. Press the select soft key. Use the keypad: enter the first character(s) of the required name. (e.G., entering “v” will move you to the first name in the directory ...

  • Page 61: Call Features

    Call features 61 making an sos call use this option to make emergency calls to a specific telephone number. When you press the sos key, the phone sends a text message (only with the g955 or i755 dect handset) or initiates a voice call. You must program an sos number to use the sos function. For more...

  • Page 62: Call Features

    Call features 62 answering a call in normal mode to answer a call in normal mode, perform the following step: 1. Press the call key. (loudspeaker is off) or 1. Press the ok key. (loudspeaker is on) answering a call using any key to answer a call using any key, perform the following step: 1. Press an...

  • Page 63: Call Features

    Call features 63 change settings during a call during a call, you can adjust the headset or loudspeaker volume and mute the handset: adjusting the headset or loudspeaker volume (page 63) using mute during a call (page 63) adjusting the headset or loudspeaker volume during a call, you can change the ...

  • Page 64: Call Features

    Call features 64 to transfer a call, perform the following steps: 1. To place the first call on hold: press the call key. 2. Use the keypad: enter the phone number (including any additional digits e.G., to get access to an outside line). 3. To alternate between the two parties: press the call key. 4...

  • Page 65: Call Features

    Call features 65 for private telephone book only: 6. Choose the required contact‟s number. 7. Press the call key. 8. To alternate between the two parties: press the call key. 9. Press the clr key to transfer the call. Voice mail use the voice mail feature (if available on your communication system) ...

  • Page 66: Call Features

    Call features 66 the following figure shows the voice mail display screen. Press the yes soft key to listen to the new voice message if voice mail number is configured or press the no soft key to close the dialogue. Accessing voice mail to access voice mail, perform the following steps: 1. Press the...

  • Page 67: Call Features

    Call features 67 5. Choose the listen to voice mail option. 6. Press the select soft key. The handset automatically dials the voice mail access number and you can listen to your voice mails. 7. Press the clr key one or more times to return to the idle display. Defining a voice mail number to define ...

  • Page 68: Call Features

    Call features 68 by entering number: 5. Choose the enter number option. 6. Press the select soft key. 7. Use the keypad: enter the number. 8. Press the save soft key. 9. Press the clr key one or more times to return to the idle display. By looking up contact: 5. Choose the lookup contact option. 6. ...

  • Page 69: Call Features

    Call features 69 calls list the calls list stores information about dialled, answered, or missed calls (maximum 50 entries for all lists). Attention the actual maximum number of entries can be smaller depending on the usage of the available memory for other features. When there is more than one call...

  • Page 70: Call Features

    Call features 70 the following table describes the calls list icons. Table 10: call list icons symbol description all calls answered call dialled call missed call this section describes the following features: all calls list (page 70) answered calls list (page 71) dialled calls list (page 71) missed...

  • Page 71: Call Features

    Call features 71 2. Select the all calls list. Answered calls list the answered calls list stores the details of the answered calls. The most recent entry is at the top of the list. Accessing the answered calls list to access the answered calls list, perform the following steps: 1. Press the calls s...

  • Page 72: Call Features

    Call features 72 missed calls list the missed calls list stores the details of calls that are unanswered, rejected or blocked by the caller filter feature (the latter only for g955 and i755). The most recent entry is at the top of the list. The following table shows the missed call icons. Table 11: ...

  • Page 73: Call Features

    Call features 73 1. Press the calls soft key. 2. Select the missed calls list. Actions on the calls lists except for the action to delete all entries in one of the calls lists (see deleting all entries (page 78) ), all actions described in this section start with: 1. Open the appropriate calls list ...

  • Page 74: Call Features

    Call features 74 3. Press the more soft key. 4. Highlight the view option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Dialling a number to dial a number from the all/answered/dialled/missed calls list, perform the following steps: 3. Press the...

  • Page 75: Call Features

    Call features 75 6. Use the keypad: enter the new digits. 7. Press the call key. Transferring a number to your contacts list to transfer a number from the all/answered/dialled/missed calls list to your contacts list, where the handset treats the number as a new entry, perform the following steps: 3....

  • Page 76: Call Features

    Call features 76 optional step(s): 11. Use the keypad: edit the name . 12. Press the save soft key. 13. Press the yes soft key. 14. Press the clr key one or more times to return to the idle display. Transferring a number to the caller filter list attention the caller filter feature is available only...

  • Page 77: Call Features

    Call features 77 optional step(s): 8. Use the keypad: edit the number . 9. Press the save soft key. Optional step(s): 10. Use the keypad: edit the name . 11. Press the save soft key. 12. Press the clr key one or more times to return to the idle display. Deleting an entry to delete an entry from the ...

  • Page 78: Call Features

    Call features 78 deleting all entries to delete all entries from the all/answered/dialled/missed calls list, perform the following steps: 1. Open the appropriate calls list as shown in previous chapters. 2. Press the more soft key. 3. Highlight the delete all option. 4. Press the select soft key. 5....

  • Page 79: Contacts

    Contacts 79 contacts you can use your handset to store contact numbers and names. Without a mem card you can store up to 50 contacts and with a mem card you can store up to 200 contacts. Attention the actual maximum number of entries can be smaller depending on the usage of the available memory for ...

  • Page 80: Contacts

    Contacts 80 this section describes the following tasks. Accessing the contacts menu (page 80) adding a new contact (page 80) changing information of a contact (page 82) deleting contacts (page 86) speed dial feature (page 87) transferring numbers to your contacts list (page 90) transferring phone nu...

  • Page 81: Contacts

    Contacts 81 open the contacts menu as shown in accessing the contacts menu (page 80). Highlight the new contact option. Select the required type of the contact number. Press the add soft key. Use the keypad: enter the phone number (including any additional digits e.G., to get access to an outside li...

  • Page 82: Contacts

    Contacts 82 changing information of a contact to change information of one of the existing contacts, perform the following steps: 1. Open the contacts menu as shown in accessing the contacts menu (page 80). 2. Highlight the required contact. 3. Press the more soft key. 4. Highlight the edit contact ...

  • Page 83: Contacts

    Contacts 83 adding a contact number 6. Highlight the new number option. 7. Press the add soft key. 8. Highlight the required number type (here: home ). 9. Press the ok soft key. 10. Use the keypad: enter the phone number (including any additional digits e.G., to get access to an outside line). 11. P...

  • Page 84: Contacts

    Contacts 84 editing a contact number 6. Highlight the required number. 7. Press the edit soft key. 8. Highlight the required number type (here: home ). 9. Press the ok soft key. 10. Use the keypad: edit the number . 11. Press the save soft key. 12. Press the save soft key. 13. Press the yes soft key...

  • Page 85: Contacts

    Contacts 85 7. Press the edit soft key. 8. Press the ok soft key. 9. Press the clear soft key. 10. Press the save soft key. 11. Press the save soft key. 12. Press the yes soft key. 13. Press the clr key one or more times to return to the idle display. Editing a contact name 6. Highlight the name men...

  • Page 86: Contacts

    Contacts 86 editing a contact ringtone 6. Highlight the ringtone menu. 12. Press the edit soft key. 13. Highlight the required ringtone . 14. Press the select soft key. 15. Press the save soft key. 16. Press the yes soft key. 17. Press the clr key one or more times to return to the idle display. Del...

  • Page 87: Contacts

    Contacts 87 4. Highlight the delete contact option to delete one specific contact. Or 4. Highlight the delete all contact option to delete all contacts. 5. Press the select soft key. 6. Press the yes soft key. 7. Press the clr key one or more times to return to the idle display. Speed dial feature u...

  • Page 88: Contacts

    Contacts 88 assigning a speed dial number to assign a speed dial number, perform the following steps: 1. Open the contacts menu as shown in accessing the contacts menu (page 80) . 2. Highlight the required contact. 3. Press the more soft key. 4. Highlight the speed dial option. 5. Press the select s...

  • Page 89: Contacts

    Contacts 89 1. Open the contacts menu as shown in accessing the contacts menu (page 80) . 2. Highlight the required contact. 3. Press the more soft key. 4. Highlight the speed dial option. 5. Press the select soft key. 6. Highlight the required speed dial number. 7. Press the replace soft key. 8. Pr...

  • Page 90: Contacts

    Contacts 90 3. Press the more soft key. 4. Highlight the speed dial option. 5. Press the select soft key. 6. Highlight the required speed dial number. 7. Press the delete soft key. 8. Press the clr key one or more times to return to the idle display. Transferring numbers to your contacts list see tr...

  • Page 91: Contacts

    Contacts 91 3. Press the more soft key. 4. Highlight the save in caller filter option. 5. Press the select soft key. Optional step(s): 6. Use the keypad: edit the number . 7. Press the save soft key. Optional step(s): 8. Use the keypad: edit the name . 9. Press the save soft key. 10. Press the clr k...

  • Page 92: Messaging

    Messaging 92 messaging you can send and receive text messages using the g955 or i755 dect handset. Attention: the messaging feature is available only if supported by your communication system. Contact your system administrator to determine if you can use this feature. The messaging feature is not av...

  • Page 93: Messaging

    Messaging 93 new messages and drafts this section describes the following tasks: accessing the messaging menu (page 93) saving a new message or editing a draft (page 94) sending a new message or draft (page 95) deleting a draft (page 96) deleting all drafts (page 97) accessing the messaging menu to ...

  • Page 94: Messaging

    Messaging 94 the following table describes the message icons on the display screen. Table 13: menu section icons icon description draft message inbox message outbox message message settings saving a new message or editing a draft to save a new message or edit a draft, perform the following steps: 1....

  • Page 95: Messaging

    Messaging 95 5. Press the clr key. 6. Press the yes soft key. Sending a new message or draft to send a new message or draft, perform the following steps: 1. Open the messaging menu as shown in accessing the messaging menu (page 93) . 2. Select the new and draft option. 3. Highlight the new message o...

  • Page 96: Messaging

    Messaging 96 7. Highlight the send to option. Lookup contact to choose the number from your (private contacts) list. Enter number to use the keypad to enter the number of the addressee. Send to many to choose several numbers from your contacts list. Central directory to choose a number from the cent...

  • Page 97: Messaging

    Messaging 97 4. Press the more soft key. 5. Highlight the delete message option. 6. Press the select soft key. 7. Press the yes soft key. 8. Press the clr key one or more times to return to the idle display. Deleting all drafts to delete all drafts, perform the following steps: 1. Open the messaging...

  • Page 98: Messaging

    Messaging 98 5. Highlight the delete all messages option. 6. Press the select soft key. 7. Press the yes soft key. 8. Press the clr key one or more times to return to the idle display. Inbox this section describes the following tasks: accessing the inbox messaging menu (page 98) reading an incoming ...

  • Page 99: Messaging

    Messaging 99 2. Choose the inbox menu. Reading an incoming message to read an incoming message, perform the following steps: 1. Open the inbox menu as shown in accessing the inbox messaging menu (page 98). 2. Highlight the required message. 3. Press the select soft key. Optional step(s): 4. Scroll t...

  • Page 100: Messaging

    Messaging 100 3. Press the select soft key. 4. Press the reply soft key. 5. Use the keypad: create reply message. 6. Press the send soft key. 7. Highlight the required message type ( normal or urgent ). 8. Press the select soft key. 9. Press the ok soft key. 10. Press the clr key one or more times t...

  • Page 101: Messaging

    Messaging 101 4. Highlight the forward option. Optional step(s): 5. Use the keypad: edit the message. 6. Press the send soft key. 7. Highlight the required message type ( normal or urgent ). 8. Highlight the send to option. Lookup contact to choose the number from your (private contacts) list. Error...

  • Page 102: Messaging

    Messaging 102 saving to the contacts list to save a number to your contacts list, perform the following steps: 1. Open the inbox menu as shown in accessing the inbox messaging menu (page 98) . 2. Highlight the required message. 3. Press the more soft key. Error! Not a valid bookmark self-reference. ...

  • Page 103: Messaging

    Messaging 103 deleting an incoming message to delete an incoming message, perform the following steps: 1. Open the inbox menu as shown in accessing the inbox messaging menu (page 98) . 2. Highlight the required message. 3. Press the more soft key. 4. Highlight the delete message option. 5. Press the...

  • Page 104: Messaging

    Messaging 104 4. Highlight the delete all messages option. 5. Press the select soft key. 6. Press the yes soft key. 7. Press the clr key one or more times to return to the idle display. Sent messages this section describes the following tasks: accessing the sent messages menu (page 104) reading a se...

  • Page 105: Messaging

    Messaging 105 reading a sent message to read a sent message, perform the following steps: 1. Open the sent messages menu as shown in accessing the sent messages menu (page 104) . 2. Highlight the required message. 3. Press the view soft key. Optional step(s): 4. Scroll the text of the message in cas...

  • Page 106: Messaging

    Messaging 106 4. Highlight the edit option. 5. Press the select soft key. Optional step(s): 6. Use the keypad: edit the message. 7. Press the send soft key. 8. Highlight the required message type ( normal or urgent ). 9. Highlight the send to option. Lookup contact to choose the number from your (pr...

  • Page 107: Messaging

    Messaging 107 deleting a sent message to delete a sent message, perform the following steps: 1. Open the sent messages menu as shown in accessing the sent messages menu (page 104) . 2. Highlight the required message. 3. Press the more soft key. 4. Highlight the delete message option. 5. Press the se...

  • Page 108: Messaging

    Messaging 108 3. Highlight the delete all messages option. 4. Press the select soft key. 5. Press the yes soft key. 6. Press the clr key one or more times to return to the idle display. Message settings this section describes the following tasks: accessing the message settings menu (page 108) config...

  • Page 109: Messaging

    Messaging 109 3. Choose the message settings menu section. Configuring the overwrite old option use the overwrite old option to control what happens when the handset receives a new message, but there is no room to store more messages. If the overwrite old option is set to on and there is no room to ...

  • Page 110: Messaging

    Messaging 110 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Configuring the sent message option use this option to control whether sent messages are stored in the handset (option set to on ) or not ...

  • Page 111: Messaging

    Messaging 111 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Configuring the display normal messages option use this option to control whether normal messages are displayed immediately upon receipt (...

  • Page 112: Messaging

    Messaging 112 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Configuring the auto answer message option use this option to control whether upon receipt of a special message automatically a loud speak...

  • Page 113: Messaging

    Messaging 113 10. Highlight the required value for the option. 11. Press the select soft key. 12. Press the clr key one or more times to return to the idle display. Configuring the silent answer message option use this option to control whether upon receipt of a special message automatically a loud ...

  • Page 114: Messaging

    Messaging 114 16. Highlight the required value for the option. 17. Press the select soft key. 18. Press the clr key one or more times to return to the idle display. Configuring the voice mail number see defining a voice mail number (page 67) . Normal, urgent and emergency messages the system differe...

  • Page 115: Messaging

    Messaging 115 the signalling process. If you receive an urgent message during a call, a repeated alert tone sounds. Emergency messages emergency messages require receipt confirmation Ŕ see confirming receipts (page 115) . An activated keypad lock temporarily deactivates after you receive an emergenc...

  • Page 116: Calendar

    Calendar 116 calendar you can use the calendar to set up reminders, appointments, and meeting alerts. The calendar allows you to store a maximum of 80 (without the mem card) and a maximum of 100 (with the mem card) appointments. Attention: the actual maximum number of appointments can be smaller dep...

  • Page 117: Calendar

    Calendar 117 2. Highlight the calendar icon. 3. Press the select soft key. Changing the calendar format to change the calendar format, perform the following steps: 1. Open the calendar menu as shown in accessing the calendar feature (page 116) . 2. Press the more soft key. 3. Highlight the view week...

  • Page 118: Calendar

    Calendar 118 3. Highlight the go to date option. 4. Press the select soft key. 5. Enter the date. 6. Press the select soft key. 7. To view the schedule of the selected date: press the select soft key. 8. Press the clr key one or more times to return to the idle display. Adding an appointment to add ...

  • Page 119: Calendar

    Calendar 119 6. Press the continue soft key. 7. Enter the start time. 8. Press the continue soft key. 9. Highlight the duration . 10. Press the select soft key. Optional step(s): 11. When other has been selected: enter the end date and end time for the appointment. 12. Use the keypad: enter the subj...

  • Page 120: Calendar

    Calendar 120 15. Press the continue soft key. 16. Highlight the reminder time. 17. Press the select soft key. Optional step(s): 18. When other has been selected: enter the reminder date and time for the appointment. 19. Press the clr key one or more times to return to the idle display. Viewing an ap...

  • Page 121: Calendar

    Calendar 121 selecting a date (page 117) . 2. Highlight the required appointment. 3. Press the view soft key. 4. Press the clr key one or more times to return to the idle display. Editing an appointment to edit an appointment in the calendar, perform the following steps: 1. Open the appropriate date...

  • Page 122: Calendar

    Calendar 122 7. Press the clr key one or more times to return to the idle display. Copying an appointment to copy an appointment, perform the following steps: 1. Open the appropriate date as shown in selecting a date (page 117) . 2. Highlight the required appointment. 3. Press the more soft key. 4. ...

  • Page 123: Calendar

    Calendar 123 2. Highlight the required appointment. 3. Press the more soft key. 4. Highlight the delete option. 5. Press the yes soft key. 6. Press the clr key one or more times to return to the idle display..

  • Page 124: Additional Features

    Additional features 124 additional features this section explains the additional features available on your g355, g955 and i755 dect handsets: using the calculator (page 124) using the stopwatch (page 127) alarms (page 129) when an incoming call arrives while using one of the additional features, th...

  • Page 125: Additional Features

    Additional features 125 6. Use the keypad: enter a value (maximum 9 numerals). Press the * key to enter a period (if necessary). 7. Select the required operation icon. 8. Press the select soft key. 9. Use the keypad: enter a value (maximum 9 numerals). Press the * key to enter a period (if necessary...

  • Page 126: Additional Features

    Additional features 126 the following table shows the calculator icons available for your use. Table 14: calculator icons symbol description addition sign division sign decimal point sign note: in all languages the decimal point is used as the decimal separator. Equal sign multiplication sign percen...

  • Page 127: Additional Features

    Additional features 127 using the stopwatch use the stopwatch to measure elapsed time. To start the stopwatch, perform the following steps: 1. Press the menu soft key to access the main menu. 2. Highlight the accessories icon. 3. Press the select soft key. 4. Highlight the stopwatch option. 5. Press...

  • Page 128: Additional Features

    Additional features 128 halted measurement. Or 9. Press the reset soft key to reset the stopwatch (back to 0). 10. Press the clr key one or more times to return to the idle display..

  • Page 129: Additional Features

    Additional features 129 alarms use the alarm feature to set up daily or recurring weekly alarms. This section describes the following tasks: accessing the alarms menu (page 129) assigning or change a daily alarm (page 130) turning off a daily alarm (page 130) assigning or change a recurrent alarm (p...

  • Page 130: Additional Features

    Additional features 130 assigning or change a daily alarm to assign or change a daily alarm, perform the following steps: 1. Open the alarms menu as shown in accessing the alarms menu (page 129). 2. Highlight the alarm option. 3. Press the select soft key. 4. Use the keypad: enter the alarm time. 5....

  • Page 131: Additional Features

    Additional features 131 4. Press the turn off soft key. 5. Press the clr key one or more times to return to the idle display. Assigning or change a recurrent alarm to assign a recurrent alarm, perform the following steps: 1. Open the alarms menu as shown in accessing the alarms menu (page 129). 2. H...

  • Page 132: Additional Features

    Additional features 132 or 7. Press the unmark soft key to deselect the required day of the week. Repeat previous two steps for all the required days of the week. 8. Press the ok soft key. 9. Press the clr key one or more times to return to the idle display. Turning off a recurrent alarm to turn off...

  • Page 133: Telephone Settings

    Telephone settings 133 telephone settings the following table gives the settings you can configure on your handset and related telephone setting icons on the display. Table 15: telephone setting icons icon description see page general settings 133 sounds & alerts settings 155 display settings 166 ca...

  • Page 134: Telephone Settings

    Telephone settings 134 resetting the memory card (page 153) viewing status information (page 154) accessing the general settings menu to access the general settings menu, perform the following steps: 1. Press the menu soft key to access the main menu. 2. Highlight the settings icon. 3. Press the sel...

  • Page 135: Telephone Settings

    Telephone settings 135 you can configure the following features for each profile: ring volume ring melody for external calls ring melody for internal calls ring melody for unknown calls normal message alert urgent message alert ring melody for emergency calls increasing ring feature alert volume ale...

  • Page 136: Telephone Settings

    Telephone settings 136 2. Highlight the profiles option. 3. Press the select soft key. 4. Highlight the select profile option. 5. Press the select soft key. : : 6. Highlight the required profile. 7. Press the select soft key. 8. Press the clr key one or more times to return to the idle display. Swit...

  • Page 137: Telephone Settings

    Telephone settings 137 editing a profile only the active profile can be edited. To edit the active profile, perform the following steps: 1. Open the general settings menu as shown in accessing the general settings menu (page 134) . 2. Highlight the profiles option. 3. Press the select soft key. 4. H...

  • Page 138: Telephone Settings

    Telephone settings 138 10. Press the clr key one or more times to return to the idle display. Resetting profiles to set all profiles to the deafult factory settings, perform the following steps: 1. Open the general settings menu as shown in accessing the general settings menu (page 134) . 2. Highlig...

  • Page 139: Telephone Settings

    Telephone settings 139 to assign the current time, perform the following steps: 1. Open the general settings menu as shown in accessing the general settings menu (page 134) . 2. Highlight the time & date option. 3. Press the select soft key. 4. Highlight the time option. 5. Press the select soft key...

  • Page 140: Telephone Settings

    Telephone settings 140 9. Press the select soft key. 10. Press the save soft key. 11. Press the clr key one or more times to return to the idle display. To assign the current date, perform the following steps: 1. Open the general settings menu as shown in accessing the general settings menu (page 13...

  • Page 141: Telephone Settings

    Telephone settings 141 6. Edit the date. 7. Press the more soft key. 8. Highlight the required date format . 9. Press the select soft key. 10. Press the save soft key. 11. Press the clr key one or more times to return to the idle display. Choosing a language use the language feature to assign the ph...

  • Page 142: Telephone Settings

    Telephone settings 142 turkish polish greek russian norwegian attention: for both the greek and russian language 2 choices are given. In both cases the only difference between the two is the order in which the characters assigned to the keys of the keypad are given to the user (e.G. For giving the c...

  • Page 143: Telephone Settings

    Telephone settings 143 configuring shortcuts use the shortcuts option to create shortcuts to access some of the handset menus and features by pressing a single button. You can assign a shortcut to the following programmable keys: left, right, up, and down. To assign a shortcut, perform the following...

  • Page 144: Telephone Settings

    Telephone settings 144 8. Press the clr key one or more times to return to the idle display. Configuring the led signal (i755 only) the i755 dect handset has a three colored leds (red, green and orange). The leds are used to indicate certain conditions to the user: missed call text message voice mes...

  • Page 145: Telephone Settings

    Telephone settings 145 4. Highlight the required led. 5. Press the select soft key. 6. Highlight the required condition to indicate with the selected led. 7. Press the select soft key. 8. Press the clr key one or more times to return to the idle display. Security options the g355, g955 and i755 dect...

  • Page 146: Telephone Settings

    Telephone settings 146 using the phone lock feature (page 146) using the automatic keypad lock feature (page 147) changing the pin code (page 148) changing the proxy password (page 150) using the phone lock feature use the phone lock feature to avoid unauthorised use of your handset. If the phone lo...

  • Page 147: Telephone Settings

    Telephone settings 147 6. Use the keypad: enter the pin (authorisation code) at the pin prompt. 7. Press the ok soft key. 8. Highlight the required value for the option. 9. Press the select soft key. 10. Press the clr key one or more times to return to the idle display. Using the automatic keypad lo...

  • Page 148: Telephone Settings

    Telephone settings 148 2. Highlight the security option. 3. Press the select soft key. 4. Highlight the automatic keylock option. 5. Press the select soft key. 6. Highlight the required value for the option. 7. Press the select soft key. 8. Press the clr key one or more times to return to the idle d...

  • Page 149: Telephone Settings

    Telephone settings 149 accessing the general settings menu (page 134) . 2. Highlight the security option. 3. Press the select soft key. 4. Highlight the change pin code option. 5. Press the select soft key. 6. Use the keypad: enter the pin (authorisation code) at the pin prompt. 7. Press the ok soft...

  • Page 150: Telephone Settings

    Telephone settings 150 10. Use the keypad: enter the new pin code . 11. Press the ok soft key. 12. Press the clr key one or more times to return to the idle display. Changing the proxy password use the change proxy password feature to change the proxy password used at sip authentication. To change t...

  • Page 151: Telephone Settings

    Telephone settings 151 optional step(s): 5. Use the keypad: enter the proxy password . 6. Press the ok soft key. 7. Use the keypad: enter the new proxy password . 8. Press the ok soft key. 9. Use the keypad: enter the new proxy password . 10. Press the ok soft key. 11. Press the clr key one or more ...

  • Page 152: Telephone Settings

    Telephone settings 152 1. Open the general settings menu as shown in accessing the general settings menu (page 134) . 2. Highlight the handset name option. 3. Press the select soft key. 4. Use the keypad: enter (or change) the handset name. 5. Press the save soft key. 6. Press the clr key one or mor...

  • Page 153: Telephone Settings

    Telephone settings 153 3. Press the select soft key. 4. Press the yes soft key. Optional step(s): 5. Use the keypad: enter the pin (authorisation code) at the pin prompt. 6. Press the ok soft key. 7. Press the clr key one or more times to return to the idle display. Resetting the memory card reset t...

  • Page 154: Telephone Settings

    Telephone settings 154 4. Press the yes soft key. 5. Use the keypad: enter the pin (authorisation code) at the pin prompt. 6. Press the ok soft key. 7. Press the clr key one or more times to return to the idle display. 8. Switch the dect handset off and on. Viewing status information use the status ...

  • Page 155: Telephone Settings

    Telephone settings 155 5. Press the ok soft key. 6. Press the clr key one or more times to return to the idle display. Sounds & alerts settings you can use your handset to configure audio settings and preferences. Use the sounds & alerts settings menu to configure audio preferences with the followin...

  • Page 156: Telephone Settings

    Telephone settings 156 2. Highlight the settings icon. 3. Press the select soft key. 4. Choose the sounds and alerts menu. Configuring the ring volume use this function to change the ringer volume. To change the ringer volume, perform the following steps: 1. Open the sounds and alerts menu as shown ...

  • Page 157: Telephone Settings

    Telephone settings 157 to the idle display. Defining the ring melodies the g955 and i755 dect handsets contain 20 available melodies and the g355 dect handset contains 10 available melodies. The available melodies can be assigned to various types of calls: ring external for external calls ring inter...

  • Page 158: Telephone Settings

    Telephone settings 158 3. Press the select soft key. 4. Select a melody. Optional step(s): 5. Press the play soft key to listen to the melody. (press the stop soft key to halt listening to the melody.) 6. Press the select soft key. 7. Press the clr key one or more times to return to the idle display...

  • Page 159: Telephone Settings

    Telephone settings 159 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Configuring alert volume use this function to change the alert volume. To change the alert volume, perform the following steps: 1...

  • Page 160: Telephone Settings

    Telephone settings 160 defining the alert tone melody to define a melody for alerts, perform the following steps: 1. Open the sounds and alerts menu as shown in accessing the sounds and alerts menu (page 155) . 2. Highlight the alert tone option. 3. Press the select soft key. 4. Select a melody. Opt...

  • Page 161: Telephone Settings

    Telephone settings 161 (page 155) . 2. Highlight the increase alert option. 3. Press the select soft key. 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Enabling the vibrator feature attention: the v...

  • Page 162: Telephone Settings

    Telephone settings 162 2. Highlight the vibrator option. 3. Press the select soft key. 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Enabling the key sound feature if you enable the key sound featur...

  • Page 163: Telephone Settings

    Telephone settings 163 3. Press the select soft key. 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Assigning confirmation sound you can assign confirmation sound to indicate if you successfully perf...

  • Page 164: Telephone Settings

    Telephone settings 164 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Enabling the coverage warning feature if you enable the coverage warning feature, a sound occurs when the handset is out of base ...

  • Page 165: Telephone Settings

    Telephone settings 165 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Enabling the charger warning feature if you enable the charger warning feature, a sound occurs when the handset is placed in the charger. To enable the charger warning feature, ...

  • Page 166: Telephone Settings

    Telephone settings 166 defining the missed call time the missed call time feature allows you to define when an unanswered incoming call is added to the missed calls list. To set the missed call time feature, perform the following steps: 1. Open the sounds and alerts menu as shown in accessing the so...

  • Page 167: Telephone Settings

    Telephone settings 167 selecting a startup screen image (page 171) configuring power save (page 173) accessing the display settings menu to access the display settings menu, perform the following steps: 1. Press the menu soft key to access the main menu. 2. Highlight the settings icon. 3. Press the ...

  • Page 168: Telephone Settings

    Telephone settings 168 2. Highlight the wallpaper option. 3. Press the select soft key. 4. Select the theme option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. To assign wallpaper other than the selected theme, perform the following steps: 1. O...

  • Page 169: Telephone Settings

    Telephone settings 169 5. Press the select soft key. : : 6. Select the required picture from the list. Optional step(s): 7. Press the show soft key to see the selected picture. (press the ok soft key to return to selecting a picture.) 8. Press the select soft key. 9. Press the clr key one or more ti...

  • Page 170: Telephone Settings

    Telephone settings 170 4. Select none . 5. Press the clr key one or more times to return to the idle display. Selecting a theme a theme is a combination of images and colour gradations for the wallpaper, startup screen, and menu of your handset. To select a theme, perform the following steps: 1. Ope...

  • Page 171: Telephone Settings

    Telephone settings 171 to the idle display. Selecting a startup screen image the startup screen image displays temporarily when the handset software starts. To assign a startup screen image according to the selected theme, perform the following steps: 1. Open the display menu as shown in accessing t...

  • Page 172: Telephone Settings

    Telephone settings 172 167) . 2. Highlight the startup screen option. 3. Press the select soft key. 4. Select the picture option. : : 5. Select the required picture from the list. Optional step(s): 6. Press the show soft key to see the selected picture. (press the ok soft key to return to selecting ...

  • Page 173: Telephone Settings

    Telephone settings 173 accessing the display settings menu (page 167) . 2. Highlight the startup screen option. 3. Press the select soft key. 4. Select none . 5. Press the clr key one or more times to return to the idle display. Configuring power save you can use the power save option to configure a...

  • Page 174: Telephone Settings

    Telephone settings 174 4. Use the keypad: enter the time periods in seconds. The first value defines the time before the display becomes dim. The second value defines the time starting from the moment the display dims, before the display switches off. If you configure this value at 0, the display ne...

  • Page 175: Telephone Settings

    Telephone settings 175 1. Press the menu soft key to access the main menu. 2. Highlight the settings icon. 3. Press the select soft key. 4. Choose the calls menu. Accessing statistics information you can view call time and message count information using the units menu. Note that only information re...

  • Page 176: Telephone Settings

    Telephone settings 176 optional step(s): 5. Press the reset and then the yes soft keys to reset the statistics. 6. Press the clr key one or more times to return to the idle display. Answer mode configuration incoming calls can be answered in the following modes: any key to answer with any key auto a...

  • Page 177: Telephone Settings

    Telephone settings 177 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Caller filter configuration the caller filter allows you to selectively block or accept calls from specified phone numbers. You can store up to 10 phone numbers in the caller fi...

  • Page 178: Telephone Settings

    Telephone settings 178 2. Highlight the caller filter option. 3. Press the select soft key. Adding an entry to the caller filter list to add an entry to the caller filter list, perform following steps: 1. Open the caller filter menu as shown in accessing the caller filter menu (page 177) . 2. Highli...

  • Page 179: Telephone Settings

    Telephone settings 179 9. Use the keypad: enter the name. 10. Press the save soft key. 11. Press the clr key one or more times to return to the idle display. Or 5. Choose the lookup contact option. 6. Press the select soft key. 7. Highlight the required contact. 8. Press the select soft key. 9. Pres...

  • Page 180: Telephone Settings

    Telephone settings 180 3. Press the select soft key. 4. Highlight the required entry. 5. Press the more soft key. 6. Highlight the edit option. 7. Press the select soft key. 8. Use the keypad: edit the number . 9. Press the save soft key. 10. Use the keypad: edit the name . 11. Press the save soft k...

  • Page 181: Telephone Settings

    Telephone settings 181 2. Highlight the list option. 3. Press the select soft key. 4. Highlight the required entry. 5. Highlight the delete option. 6. Press the select soft key. 7. Press the yes soft key. 8. Press the clr key one or more times to return to the idle display. Deleting all entries in t...

  • Page 182: Telephone Settings

    Telephone settings 182 3. Press the select soft key. 4. Highlight any entry. 5. Press the more soft key. 6. Highlight the delete all option. 7. Press the select soft key. 8. Press the yes soft key. 9. Use the keypad: enter the pin (authorisation code) at the pin prompt. 10. Press the ok soft key. 11...

  • Page 183: Telephone Settings

    Telephone settings 183 1. Open the caller filter menu as shown in accessing the caller filter menu (page 177) . 2. Highlight the mode option. 3. Press the select soft key. 4. Highlight the required caller filter option: accept list , block list or filter off . 5. Press the select soft key. 6. Press ...

  • Page 184: Telephone Settings

    Telephone settings 184 attention: the emergency call feature is available on the g355, g955 and i755 handset, but the message can only be sent from g955 or i755 dect handset. You can send text messages only if your system supports this feature. Contact your system administrator to determine if you c...

  • Page 185: Telephone Settings

    Telephone settings 185 8. Highlight the required contact. 9. Press the select soft key. 10. Press the clr key one or more times to return to the idle display. Or 6. Choose the enter number option. 7. Press the select soft key. 8. Use the keypad: enter the number. 9. Press the save soft key. 10. Pres...

  • Page 186: Telephone Settings

    Telephone settings 186 3. Press the select soft key. 4. Highlight the message option. 5. Press the select soft key. 6. Use the keypad: edit the message. 7. Press the save soft key. 8. Use the keypad: enter the number. 9. Press the save soft key. 10. Press the clr key one or more times to return to t...

  • Page 187: Telephone Settings

    Telephone settings 187 2. Highlight the mandown call option. 3. Press the select soft key. Depending on the required action continue with the appropriate step 4: setting the mandown mode (page 187) defining the mandown message (page 188) defining the mandown destination (page 189) setting the mandow...

  • Page 188: Telephone Settings

    Telephone settings 188 6. Highlight the required value for the option. 7. Press the select soft key. 8. Press the clr key one or more times to return to the idle display. Defining the mandown message defines the mandown message that will be sent upon activation of mandown. When no message is defined...

  • Page 189: Telephone Settings

    Telephone settings 189 defining the mandown destination defines the destination that will be called or to whom a message will be sent when the mandown situation arises. To define the mandown destination number do the following: 4. Highlight the number option. 5. Press the select soft key. 6. Highlig...

  • Page 190: Telephone Settings

    Telephone settings 190 5. Press the select soft key. 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Setting the mandown delay the mandown delay specifies the time that elapses between the time that t...

  • Page 191: Telephone Settings

    Telephone settings 191 : : 7. Highlight the required value for the option. 8. Press the select soft key. 9. Press the clr key one or more times to return to the idle display. Setting the mandown prealarm time the mandown prealarm time specifies the time that i755 dect handset has to stay in the mand...

  • Page 192: Telephone Settings

    Telephone settings 192 : : 10. Highlight the required value for the option. 11. Press the select soft key. 12. Press the clr key one or more times to return to the idle display. Assigning the silent charging feature activate the silent charging feature if you do not want the handset to ring or vibra...

  • Page 193: Telephone Settings

    Telephone settings 193 the calls settings menu (page 174) . 2. Highlight the silent charging option. 3. Press the select soft key. 4. Highlight the required value for the option. 5. Press the select soft key. 6. Press the clr key one or more times to return to the idle display. Connectivity settings...

  • Page 194: Telephone Settings

    Telephone settings 194 selecting a network for information about selecting a network, see manually selecting the dect system (page 52) and enabling automatic dect system selection (page 53) . Bluetooth attention: the bluetooth feature is available only on the g955 and i755 dect handset. The followin...

  • Page 195: Telephone Settings

    Telephone settings 195 handset accessories nec philips provides accessories with your handset. The following table lists the accessories available for the g355, g955 and i755 dect handsets. Table 16: list of accessories item description g355/g955 multi charger rack the g355/g955 multi charger rack a...

  • Page 196: Handset Accessories

    Handset accessories 196 table 16: list of accessories item description g355/g955 ac adapter uk ac adapter for g355/g955 desktop charger with uk mains plug. G355/g955 ac adapter au ac adapter for g355/g955 desktop charger with australian (and new zealand) mains plug. G355/g955 ac adapter na ac adapte...

  • Page 197: Telephone Settings

    Telephone settings 197 table 16: list of accessories item description handset pouches pouch (carry case) for the dect handsets. Four variants are available: 1. Horizontal pouch for g355, g955 or i755 (one pouch fits all types); 2. Vertial pouch for the g355/g955; 3. Vertical pouch for the i755; 4. P...

  • Page 198: Handset Accessories

    Handset accessories 198 to install the belt clip, perform the following steps: 1. Place the handset facedown on a flat surface. 2. Use the plastic tool to unlock the fastening of the belt clip compartment cover as shown in figure 14: using plastic tool . 3. The plastic tool is shipped in the box wit...

  • Page 199: Telephone Settings

    Telephone settings 199 figure 15: installed swivel belt clip figure 16: installed executive belt clip.

  • Page 200: Handset Accessories

    Handset accessories 200 to uninstall the belt clip, perform the following steps: 1. Place the handset facedown on a flat surface. 2. Use the plastic tool to unlock the belt clip fastening. 3. The plastic tool is shipped in the box with the handset. 4. Slide the belt clip upward. 5. Remove the belt c...

  • Page 201: Telephone Settings

    Telephone settings 201 installing the belt clip on the i755 you can use the belt clip to fasten the handset on a belt, shirt or coat pocket. The i755 is fitted with a belt clip when initially delivered to the customer. When the i755 is used with a vertical pouch the belt clip is to be replaced by th...

  • Page 202: Handset Accessories

    Handset accessories 202 connecting the headset to use the optional headset with your g355, g955 and i755 dect handsets, insert the headset plug in the headset connector install as shown in figure 18: connecting the headset . Figure 18: connecting the headset installing or removing the memory (mem) c...

  • Page 203: Telephone Settings

    Telephone settings 203 attention: dropping the handset can in some cases cause a mem card not to be correctly installed in the handset anymore. In case the memcards holds one or more dect subscriptions then the message “invalid memory card” is given on the handset display. Please insert the mem card...

  • Page 204: Handset Accessories

    Handset accessories 204 figure 19: installing the mem card removing the mem card to remove the mem card from the handset, perform the following steps: 1. Place the handset facedown on a flat surface. 2. Remove the battery compartment cover and the battery. 3. Lift up the top-end and slide out the me...

  • Page 205: Telephone Settings

    Telephone settings 205 figure 20: removing the mem card bluetooth module installation the g955 and i755 dect handsets are equipped with a radio system to support bluetooth wireless technology enabled headsets. Ensure you are familiar with the operation of the navigation keys to use the bluetooth fea...

  • Page 206: Handset Accessories

    Handset accessories 206 3. Slide the bluetooth module into the bluetooth compartment as shown in figure 21: bluetooth module installed and click the bluetooth module firmly into place. 4. Replace the cover after you reinstall the battery pack. Figure 21: bluetooth module installed removing the bluet...

  • Page 207: Telephone Settings

    Telephone settings 207 figure 22: bluetoooth module removed bluetooth headset installation you can install a bluetooth headset on your handset. The following table describes the bluetooth headset status icons: table 17: bluetooth headset status icon description connected disconnected in conversation...

  • Page 208: Handset Accessories

    Handset accessories 208 enabling bluetooth connectivity (page 208) disabling bluetooth connectivity (page 209) adding the bluetooth headset (page 209) connecting and disconnecting a paired bluetooth headset (page 210) deleting a bluetooth headset (page 211) accessing the bluetooth configuration menu...

  • Page 209: Telephone Settings

    Telephone settings 209 5. Press the clr key one or more times to return to the idle display. Disabling bluetooth connectivity to disable bluetooth connectivity, perform the following steps: 1. Open the bluetooth configuration menu as shown in accessing the bluetooth configuration menu (page 208) . 2...

  • Page 210: Handset Accessories

    Handset accessories 210 4. Highlight the search for devices option. 5. Press the pair soft key. 6. Use the keypad: enter the pin code of your bluetooth headset (refer to your headset documentation). 7. Press the connect soft key. 8. Press the clr key one or more times to return to the idle display. ...

  • Page 211: Telephone Settings

    Telephone settings 211 3. Press the select soft key. 4. Highlight the required device. 5. Press the connect soft key. Or 5. Press the discon. Soft key. 6. Press the clr key one or more times to return to the idle display. Deleting a bluetooth headset to delete a bluetooth headset, perform the follow...

  • Page 212

    Handset accessories 212 6. Highlight the delete option. 7. Press the yes soft key. 8. Press the clr key one or more times to return to the idle display..