- DL manuals
- NEC
- Computer Hardware
- IE-703079-MC-EM1
- User Manual
NEC IE-703079-MC-EM1 User Manual
Summary of IE-703079-MC-EM1
Page 1
User’s manual target device v850/sf1™ ie-703079-mc-em1 in-circuit emulator option board 1991 © document no. U15447ej1v0um00 (1st edition) date published september 2001 n cp(k) printed in japan 2001.
Page 2
User’s manual u15447ej1v0um 2 [memo].
Page 3
User’s manual u15447ej1v0um 3 v850 family and v850/sf1 are trademarks of nec corporation. Windows is either a registered trademark or a trademark of microsoft corporation in the united states and/or other countries. Pc/at is a trademark of international business machines corporation. Ethernet is a t...
Page 4: Regional Information
User’s manual u15447ej1v0um 4 regional information some information contained in this document may vary from country to country. Before using any nec product in your application, piease contact the nec office in your country to obtain a list of authorized representatives and distributors. They will ...
Page 5
User’s manual u15447ej1v0um 5 introduction target readers this manual is intended for users who design and develop application systems using the v850/sf1™. Purpose the purpose of this manual is to describe the proper operation of the ie-703079-mc- em1 and its basic specifications. Organization this ...
Page 6
User’s manual u15447ej1v0um 6 related documents when using this manual, refer to the following manuals. The related documents indicated in this publication may include preliminary versions. However, preliminary versions are not marked as such. { documents related to development tools (user’s manuals...
Page 7
User’s manual u15447ej1v0um 7 contents chapter 1 overview......................................................................................................................... 10 1.1 hardware configuration ..............................................................................................
Page 8
User’s manual u15447ej1v0um 8 list of figures figure no. Title page 1-1 system configuration ........................................................................................................................................12 1-2 contents in carton.................................................
Page 9
User’s manual u15447ej1v0um 9 list of tables table no. Title page 2-1 main system clock setting................................................................................................................................ 20 2-2 subsystem clock setting.................................................
Page 10
User’s manual u15447ej1v0um 10 option board (ie-703079-mc-em1) by adding this board, the ie-703002-mc can be used as in-circuit emulator for v850/sf1. Extension probe swex-100sd (for gc/gf package) note 1 gf-n17dt (for gf package) note 1 general-purpose extension probe made by tokyo eletech corporat...
Page 11
Chapter 1 overview user’s manual u15447ej1v0um 11 1.2 features (when connected to ie-703002-mc) { maximum operating frequency: 16 mhz (at 5.0 v operation) { extremely lightweight and compact { higher equivalence with target device can be achieved by omitting buffer between signal cables. { the follo...
Page 12
Chapter 1 overview user’s manual u15447ej1v0um 12 1.4 system configuration the system configuration when connecting the ie-703002-mc to the ie-703079-mc-em1 and a personal computer (pc-9800 series or pc/at (or compatibles)) is shown below. Figure 1-1. System configuration remark personal computer (p...
Page 13
Chapter 1 overview user’s manual u15447ej1v0um 13 1.5 contents in carton the carton of the ie-703079-mc-em1 contains a main unit, guarantee card, packing list, and accessory bag. Make sure that the accessory bag contains this manual and the connector accessories. If there are missing or damaged item...
Page 14
Chapter 1 overview user’s manual u15447ej1v0um 14 check that the accessory bag contains this manual, an accessory list ( × 1), and the following accessories. (a) spacers × 4 (b) screws/washers × 4 sets (including screws and washer × 4) figure 1-3. Accessories (a) spacers (b) screws/washers.
Page 15
Chapter 1 overview user’s manual u15447ej1v0um 15 1.6 connection between ie-703002-mc and ie-703079-mc-em1 the procedure for connecting the ie-703002-mc and ie-703079-mc-em1 is described below. Caution connect carefully so as not to break or bend connector pins. Remove the pod cover (upper and lower...
Page 16
Chapter 1 overview user’s manual u15447ej1v0um 16 figure 1-4. Connection between ie-703002-mc and ie-703079-mc-em1 (1/2) (a) overview (b) pga socket lever of ie-703079-mc-em1 close open ie-703002-mc nylon rivets upper cover screw washer ie-703079-mc-em1 spacer.
Page 17
Chapter 1 overview user’s manual u15447ej1v0um 17 figure 1-4. Connection between ie-703002-mc and ie-703079-mc-em1 (2/2) (c) connecting part (ie-703079-mc-em1) pin a1 position : insertion guide : ie-703002-mc insertion area.
Page 18
User’s manual u15447ej1v0um 18 chapter 2 names and functions of components this chapter describes the names, functions, and switch settings of components in the ie-703079-mc-em1. For the details of the pod, jumper, and switch positions, etc., refer to the ie-703002-mc user’s manual (u11595e). 2.1 co...
Page 19
Chapter 2 names and functions of components user’s manual u15447ej1v0um 19 (1) test pins (cp1, cp2, cp13, cp15) these are pins used for testing the analog signals of the standalone emulator. • cp1: gnd • cp2: gnd • cp13: gnd • cp15: gnd (2) jp1 this is a pin board for supplying the main system clock...
Page 20
Chapter 2 names and functions of components user’s manual u15447ej1v0um 20 2.2 clock settings this section describes the clock settings. For the position of the jp1 and jp2 in the ie-703079-mc-em1, refer to figure 2-1. For the jumper switch position in the ie-703002-mc, refer to the ie-703002-mc use...
Page 21
Chapter 2 names and functions of components user’s manual u15447ej1v0um 21 2.2.2 subsystem clock setting table 2-2. Subsystem clock setting ie-703079-mc-em1 setting emulator use environment clock supply method jp3 when using emulator as standalone unit internal clock note 1 oscillator mounted (a 32....
Page 22
Chapter 2 names and functions of components user’s manual u15447ej1v0um 22 2.3 illegal access detection rom setting if using the ie-703002-mc for an in-circuit emulator for the v850/sf1 by connecting the ie-703079-mc-em1, set jp1 of the ie-703002-mc as follows. Table 2-3. Jp1 setting in ie-703002-mc...
Page 23
User’s manual u15447ej1v0um 23 chapter 3 factory settings item description remark jp1 oscillator mounted 16 mhz clock supplied for main system clock jp2 note (1-2 shorted) 1 2 3 internal clock used for main system clock jp3 oscillator mounted 32.768 khz clock supplied for subsystem clock note use jp...
Page 24
User’s manual u15447ej1v0um 24 chapter 4 cautions 4.1 v dd0 and portv dd of target system (1) v dd0 in the target system is used to sense the level for target system power supply on/off. • when v dd0 is lower than 1 v, it is judged that the target system is not connected, and mapping of the target m...
Page 25
Chapter 4 cautions user’s manual u15447ej1v0um 25 4.2 nmi signal the input signal (nmi signal) from the target system is delayed (t pd = 0.25 ns (typ.)) because it passes through qs3125 (q switch), and i/o signals (ports 4, 5, 6, 9, 11) pass through qs3384 (q switch) before it is input to the emulat...
Page 26
Chapter 4 cautions user’s manual u15447ej1v0um 26 4.5 bus interface pin the operation of the pin for the bus interface differs between the emulator and the target device as follows. Table 4-1. Bus interface pin operation list (1/2) (a) during break internal memory external memory memory used by emul...
Page 27
Chapter 4 cautions user’s manual u15447ej1v0um 27 table 4-1. Bus interface pin operation list (2/2) (b) during run internal memory external memory internal rom internal ram internal peripheral i/o emulation ram target system pin name f r f r w r w f r w f r w a16 to a21 hold the last accessed addres...
Page 28
User’s manual u15447ej1v0um 28 chapter 5 differences between target device and target interface circuit differences between the signal lines of the target device and the signal lines of the ie-703079-mc-em1 target interface circuit are described in this chapter. The target device is a cmos circuit, ...
Page 29
Chapter 5 differences between target device and target interface circuit user’s manual u15447ej1v0um 29 figure 5-1. Equivalent circuit of emulation circuit (1/5) p00/nmi probe side ie system side pd70f3079y qs3125 in/out p01/intp0 p02/intp1 p03/intp2 p04/intp3 p05/intp4/adtrg p06/intp5 p07/intp6 in/...
Page 30
Chapter 5 differences between target device and target interface circuit user’s manual u15447ej1v0um 30 figure 5-1. Equivalent circuit of emulation circuit (2/5) probe side ie system side p50/ad8 p51/ad9 p52/ad10 p53/ad11 p54/ad12 p55/ad13 p56/ad14 p57/ad15 qs3384 out in pd703091r fpga or2t40a in/ou...
Page 31
Chapter 5 differences between target device and target interface circuit user’s manual u15447ej1v0um 31 figure 5-1. Equivalent circuit of emulation circuit (3/5) probe side ie system side p96/hldrq pd70f3079y in/out p100/kr0/to7 p101/kr1/ti70 p102/kr2/ti00 p103/kr3/ti01 p104/kr4/to0 p105/kr5/ti10 p1...
Page 32
Chapter 5 differences between target device and target interface circuit user’s manual u15447ej1v0um 32 figure 5-1. Equivalent circuit of emulation circuit (4/5) v cc 5.1 k Ω 3 v probe side ie system side socket reset x2 pd70f3079y x1 x1 1 m Ω 1 7 jp1 1 2 3 1-2 shorted jp2 xt2 pd70f3079y xt1 xt1 1 7...
Page 33
Chapter 5 differences between target device and target interface circuit user’s manual u15447ej1v0um 33 figure 5-1. Equivalent circuit of emulation circuit (5/5) probe side ie system side pd70f3079y adcv dd adcgnd cpureg open v pp /mode open x2 open xt2 open gnd0 gnd1 gnd2 portgnd 0.1 f 3.3 v jp1 jp...
Page 34
User’s manual u15447ej1v0um 34 appendix package drawings ie-703002-mc + ie-703079-mc-em1 (unit: mm) 571 103 166 58.8 52 90 27 302 top view side view ie-703079-mc-em1 ie-703002-mc bottom view top view 33.0 130 33.0 pin 1 direction.
Page 35: Facsimile
Although nec has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that errors may occur. Despite all the care and precautions we’ve taken, you may encounter problems in the documentation. Please complete this ...