NEC JC-1572VMA-1 - MultiSync M500 - 15" CRT Display User Manual - Features

Manual is about: NEC MultiSync M500: Users Manual

Summary of JC-1572VMA-1 - MultiSync M500 - 15" CRT Display

  • Page 1

    Multisync ® m series user’s manual multisync ® m series user’s manual nec multimedia series contents 1 quick start 2-3 controls 4-7 recommended use 8-9 specifications 10-11 features 12 troubleshooting 13 references 14 limited warranty 15 78133441 6/24/98, 7:49 am 1.

  • Page 2

    To prevent fire or shock hazards, do not expose this unit to rain or moisture. Also, do not use this unit's polarized plug with an extension cord receptacle or other outlets unless the prongs can be fully inserted. Refrain from opening the cabinet as there are high voltage components inside. Refer s...

  • Page 3: Contents

    — important — to help us in our continuing efforts to better serve and support you, and to bring you new and innovative products, please take a few moments to register your new nec multisync monitor. By returning this card, we confirm your date of purchase and records the model and serial numbers. T...

  • Page 4: Quick Start

    15-pin mini d-sub captive combined signal cable mac adapter (not included) 15-pin mini d-sub computer captive combined signal cable quick start to attach the multisync ® m series monitor to your system, follow these instructions: 1. Turn off the power to your computer and multisync monitor. 2. If ne...

  • Page 5: Quick Start

    Power cord power outlet reset mute proceed exit control 4. Locate the audio output connection on the component(s) which will serve as the source(s) for the built-in speakers. (the component(s) could be your system, cd- rom, sound card, etc.). 5. Once you have determined the source, identify the conn...

  • Page 6: Controls

    4 osm ™ buttons on the front of the monitor function as follows: main menu sub-menu exit exits the osm controls. Exits to the osm main menu. Control moves the highlighted moves the highlighted area / area up/down to select up/down to select one of the one of the controls. Controls. Control moves hig...

  • Page 7: Controls

    5 controls size and position left/right: moves the image horizontally (left or right). Up/down: moves the image vertically (up or down). Narrow/wide: increases or decreases the horizontal size of the image. Tall/short: increases or decreases the vertical size of the image. Color control/accucolor ® ...

  • Page 8: Controls

    Note: select desired setting based upon your application. Language: osm ™ menus are available in 6 languages. Osm position: you can choose where you would like the osm image to appear on your screen. Selecting osm position allows you to manually adjust the osm menu left, right, up or down. Osm turn ...

  • Page 9: Controls

    7 controls factory preset: selecting factory preset allows you to reset all osm settings back to the factory settings. A warning statement will appear to confirm that you do want to reset all settings. Individual settings can be reset by highlighting the control to be reset and pressing the reset bu...

  • Page 10: Recommended Use

    Safety precautions and maintenance for optimum performance, please note the following when setting up and using the multisync ® m series color monitor: • do not open the monitor. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or ot...

  • Page 11: Recommended Use

    Correct placement and adjustment of the monitor can reduce eye, shoulder and neck fatigue. Check the following when you position the monitor: recommended use • adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when view...

  • Page 12: Specifications

    Specifications 10 monitor multisync ® m 500 ™ notes specifications monitor picture tube diagonal: 15 inch 90 ° deflection, 0.25 mm mask pitch, viewable image size: 13.8 inch cromaclear ® crt, medium-short persistence radius: 1080 mm phosphor, multi-layered, anti-static screen coating, semi-dark-tint...

  • Page 13

    11 monitor multisync ® m 700 ™ notes specifications monitor picture tube diagonal: 17 inch 90 ° deflection, 0.25 mm mask pitch, viewable image size: 15.6 inch cromaclear ® crt, medium-short persistence radius: 1210 mm phosphor, multi-layered, anti-static screen coating, semi-dark-tint screen, invar ...

  • Page 14: Features

    12 features cromaclear ® crt: delivers images with more clarity than found in traditional crt’s. Phosphors appear elliptical when illuminated, resulting in screen images with more depth and dimension. Opticlear ® screen surface: reduces reflection and glare and increases contrast without sacrificing...

  • Page 15: Troubleshooting

    13 troubleshooting no picture • display card should be completely seated in its slot. • power button and computer power switch should be in the on position. • signal cable should be completely connected to display card/computer. • check connector for bent or pushed-in pins. Image is scrolling or uns...

  • Page 16: References

    14 references • bbs (978) 635-4706 nec technologies’ remote bulletin board system is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k bps, no parity, 8-data bits, 1 stop bit • customer service/ technical support (800) 632-466...

  • Page 17: Limited Warranty

    Nec technologies, inc. (hereinafter “nectech”), warrants this product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of the enclosed unit which proves defective for a period of three (3) years from the date of ...

  • Page 18

    Notes 78133441 6/24/98, 7:50 am 18.

  • Page 19

    Notes 78133441 6/24/98, 7:50 am 19.

  • Page 20

    Nec multimedia series part no. 78133441 printed in taiwan r.O.C. Proprietary notice and liability disclaimer the information disclosed in this document, including all designs and related materials, is the valuable property of nec technologies and/or its licensors, as appropriate, reserve all patent,...