Nec lcd series you can register your product online at www.Nectech.Com/ productregistration 1525x.Wpc 11/5/99, 12:55 pm 1.
Index warning .............................................................. 1 contents ............................................................... 2 quick start ........................................................ 3-8 controls ..........................................................9-11 r...
To prevent fire or shock hazards, do not expose this unit to rain or moisture. Also, do not use this unit's polarized plug with an extension cord receptacle or other outlets unless the prongs can be fully inserted. Refrain from opening the cabinet as there are high voltage components inside. Refer s...
Contents 2 your new nec technologies multisync ® lcd monitor box* should contain the following: • multisync lcd 1525x ™ monitor with tilt/swivel base • power cord (# 70810786) • ac adapter (#a1240t01) (located in base) • dvi to dfp adapter • video signal cable • dvi-d to dvi-d cable • usb cable • us...
Quick start to attach the multisync ® lcd monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the pc with dvi digital output: connect the dvi signal cable to the connector of the display card in your system (figure a.1). Tighten all screws. For the pc wi...
4 quick start cont. Figure b.1 note: some macintosh systems do not require a mactintosh cable adapter figure a.1 figure a.2 figure a.3 macintosh cable adapter (not included) 1525x.Wpc 11/5/99, 12:55 pm 6.
5 quick start cont. Clip a clip b figure c.1 dvi d-sub 1525x.Wpc 11/5/99, 12:55 pm 7.
Multisync lc d 15 dvi/d -sub multisyn c lcd 1525x 6 a type b type figure e.1 figure d.1 figure f.1 figure g.1 quick start cont. 1525x.Wpc 11/5/99, 12:55 pm 8.
7 quick start cont. Tilt grasp both sides of the monitor screen with your hands and adjust the tilt as desired (figure ts.1). Remove ac adapter from monitor stand to remove the ac adapter 1. Remove the back panel and remove cable cover (figure ac.1). 2. Disconnect all cables. 3. Place monitor face d...
8 quick start cont. Figure r.1 figure r.2 non-abrasive surface caution figure r.3 remove monitor stand for mounting to prepare the monitor for alternate mounting purposes: 1. Remove the back cover and the cable cover (figure r.1). 2. Disconnect all cables. 3. Place monitor face down on a non-abrasiv...
9 input select if no osm menu is displayed, video input and usb upstream can be changed by pressing the proceed button. : changes only video : changes video and usb osm ™ (on-screen-manager) controls to access osm press any of control buttons ( , , , ). The osm controls on the front of the monitor f...
10 controls cont. Image adjust (analog input only) h.Size: adjusts the horizontal size by increasing or decreasing this setting. Fine: improves focus, clarity and image stability by increasing or decreasing the fine setting. Auto adjust: automatically adjusts h. Size or fine settings. Accucolor ® co...
11 controls cont. Dvi select: this function selects the dvi input mode. When the dvi selection has been changed, you must restart your computer. Digital: dvi digital input is available. Analog: dvi analog input is available. Factory preset: selecting factory preset allows you to reset all osm contro...
12 safety precautions and maintenance for optimum performance, please note the following when setting up and using the multisync ® lcd color monitor: • do not open the monitor. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or othe...
Correct placement and adjustment of the monitor can reduce eye, shoulder and neck fatigue. Check the following when you position the monitor: • for optimum performance, allow 20 minutes for warm-up. • adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eye...
Specifications 14 monitor multisync ® lcd 1525x ™ notes specifications monitor lcd module diagonal: 15.0 inch active matrix; thin film transistor (tft) viewable image size: 15.0 inch liquid crystal display (lcd); 0.30 mm dot native resolution (pixel count): 1024 x 768 pitch; 200cd/m 2 white luminenc...
15 features ambix™ technology: dual input technology allowing both analog and digital inputs off of one connector (dvi-i) as well as additional legacy analog support off of a traditional 15-pin vga connector. Provides traditional multisync ® technol- ogy compatibility for analog as well as tmds ™ -b...
16 features cont. Accucolor ® control system: allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. Osm ™ (on-screen manager) controls: allow you to quickly and easily adjust all elements of your screen image via simple to use on-s...
17 troubleshooting no picture • the signal cable should be completely connected to the display card/computer. • the display card should be completely seated in its slot. • power button and computer power button should be in the on position. • check to make sure that a supported mode has been selecte...
18 troubleshooting cont. Display image is not sized properly • use the osm image adjust controls to increase or decrease the h. Size. • check to make sure that a supported mode has been selected on the display card or system being used. (please consult display card or system manual to change graphic...
19 references • bbs (978) 742-8706 nec technologies’ remote bulletin board system is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • customer service/ technical support (800) 6...
20 limited warranty nec technologies, inc. (hereinafter “nectech”), warrants this product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at nectech’s sole option) any part of the enclosed unit which proves defective fo...
Tco’99 21 congratulations! You have just purchased a tco’99 approved and labeled product! Your choice has provided you with a product devel- oped for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally ...
22 tco’99 cont. Accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. Tco’99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound chlorin...
Declaration of the manufacturer we hereby certify that the color monitor multisync ® lcd 1525x ™ (la-1526hmw) is in compliance with council directive 73/23/eec: – en 60950 council directive 89/336/eec: – en 55022 – en 55024 – en 61000-3-2 – en 61000-3-3 and marked with nec home electronics, ltd. 686...
Part no. Printed in japan nec lcd series proprietary notice and liability disclaimer the information disclosed in this document, including all designs and related materials, is the valuable property of nec technologies and/or its licensors, as appropriate, reserve all patent, copyright and other pro...