- DL manuals
- NEC
- Monitor
- LCD1720M - MultiSync - 17" LCD Monitor
- User Manual
NEC LCD1720M - MultiSync - 17" LCD Monitor User Manual
Summary of LCD1720M - MultiSync - 17" LCD Monitor
Page 2: Index
Index warning .................................................................................................................... 1 contents ................................................................................................................. 2 quick start .................................
Page 3
1 caution: to reduce the risk of electric shock, make sure power cord is unplugged from wall socket. To fully disengage the power to the unit, please disconnect the power cord from the ac outlet.Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service per...
Page 4: Contents
2 contents * remember to save your original box and packing material to transport or ship the monitor. Power cord video signal cable user’s manual audio cable your new nec multisync ® lcd monitor box* should contain the following: • multisync lcd 1720m ™ monitor with tilt / swivel base • power cord ...
Page 5: Quick Start
3 quick start to attach the multisync ® lcd monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the pc: connect the 15-pin mini d-sub of the appropriate signal cable to the connector of the display card in your system (figure a.1). Tighten all screws. Fo...
Page 6: Quick Start
4 quick start –continued continued continued continued continued figure a.1 figure d.1 figure c.1 figure b.1 macintosh cable adapter (not included) note: some macintosh systems do not require a macintosh cable adapter..
Page 7: Quick Start
5 figure e.1 figure f.1 quick start –continued power switch.
Page 8: Quick Start
6 tilt and swivel grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (figure ts.1). Remove monitor stand for mounting to prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place monitor face down on a non-abrasive surface. ...
Page 9: Quick Start
7 6. This lcd monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monit...
Page 10: Controls
8 note: when reset is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the reset function by pressing the exit button. Sound volume control the sound volume of speakers and headphone. Brightness/contrast controls brightness adjusts the overall image and backgroun...
Page 11: Controls
9 controls –continued accucolor ® control systems five color presets select the desired color setting. Each color setting is adjusted at the factory. R,g,b : increases or decreases red, green or blue color depending upon which is selected. The change in color will appear on screen and the direction ...
Page 12: Controls
10 controls –continued information display mode: indicates the current display resolution and frequency setting of the monitor. Monitor info: indicates the model and serial numbers of your monitor. Osm ™ warning: osm warning menus disappear with exit button. No signal: this function gives a warning ...
Page 13: Recommended Use
11 recommended use caution safety precautions and maintenance for optimum performance, please note the following when setting up and using the multisync ® lcd color monitor: • do not open the monitor. There are no user serviceable parts inside and opening or removing covers may expose you to dangero...
Page 14: Recommended Use
12 correct placement and adjustment of the monitor can reduce eye, shoulder and neck fatigue. Check the following when you position the monitor: recommended use –continued • for optimum performance, allow 20 minutes for warm-up. • adjust the monitor height so that the top of the screen is at or slig...
Page 15: Specifications
13 monitor multisync ® lcd 1720m ™ notes specifications monitor lcd module diagonal: 17.0 inch active matrix; thin film transistor (tft) viewable image size: 17.0 inch liquid crystal display (lcd); 0.264 mm pixel native resolution (pixel count): 1280 x 1024 pitch; 200cd/m 2 white luminence; 350:1 co...
Page 16: Features
14 features reduced footprint: provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. Accucolor ® control systems : allow...
Page 17: Troubleshooting
15 troubleshooting no picture • the signal cable should be completely connected to the display card/computer. • the display card should be completely seated in its slot. • front power switch and computer power switch should be in the on position. • check to make sure that a supported mode has been s...
Page 18: Troubleshooting
16 selected resolution is not displayed properly • use osm display mode to enter information menu and confirm that the appropriate resolution has been selected. If not, select corresponding option. No sound • check to see if speaker cable is properly connected. • check to see if mute is activated. •...
Page 19: References
17 references • bbs (978) 742-8706 nec-mitsubishi electronics display of america remote bulletin board system is an electronic service accessible with your system and a modem. Communica- tion parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • customer serv...
Page 20: Limited Warranty
18 limited warranty nec-mitsubishi electronics display of america, inc. (hereinafter “nmd-a”) warrants this product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at nmd-a’s sole option) any part of the enclosed unit w...
Page 21: Tco’95
19 tco’95 multisync lcd1720m black model (la-17s02-bk) congratulations! You have just purchased a tco’95 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also, to...
Page 22: Tco’95
20 tco’95 –continued reproductive damage in fish eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. Tco’95 demand requires that plastic components weighing more than...
Page 23: Tco’99
21 tco’99 multisync lcd1720m white model (la-17s02) congratulations! You have just purchased a tco’99 approved and labeled product! Your choice has provided you with a product devel- oped for professional use. Your purchase has also contributed to reducing the burden on the environment and also to t...
Page 24: Tco’99
22 tco’99 –continued health effects, including reproductive damage in fish eating birds and mammals, due to the bio- accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. Tco’99 demand requires that plastic co...
Page 25
23 power consumption of the monitor is less than 3 w when in power-saving mode. Declaration of the manufacturer we hereby certify that the color monitor multisync ® lcd1720m tm (la-17s02) and multisync ® lcd1720m tm (la-17s02-bk) are in compliance with council directive 73/23/eec: – en 60950 council...
Page 26
24 afin d’Éviter tout risque d’incendie ou d’Électrocution, ne pas exposer cet appareil À la pluie ou À l’humiditÉ. Ne pas utiliser la fiche d’alimentation polarisÉe avec une prise de cordon de rallonge ou autre prise sauf si les broches peuvent Être entiÈrement introduites. Ne pas ouvrir le boÎtier...