NEC LCD4615 - MultiSync - 46" LCD Flat Panel Display Installation Manual
NEC Display Solutions of America, Inc.
LCD4615 Installation Guide
46” LCD Display
Rev 1.0
www.necdisplay.com
Contents:
Product Description and Notes
Page 1
Tilt
Angle
and
Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top & Right Side
Page 3
Rear & Bottom
Page 4
Display Dimensions w/Optional Speakers and Stand
Page 5
Table Top Stand Dimensions
Page 6
Optional Speaker Dimensions
Page 7
Dimensions optional Wall Mount
Page 8
Control Codes
Page 9
Product Description
Type:
LCD Display
Screen Surface: Anti-Reflective
Resolution:
1920 x 1080
Dimensions:
44.2”(W) x 26.2”(H) x 5.1”(D)
Aspect Ratio:
16:9
Weight:
52.5 lbs
FCC:
Class
B
Power
Consumption:
240W
(max)
BTU’s:
818
BTU/hour
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
LCD4615 Page 1 of 9
Max. 20 deg