- DL manuals
- NEC
- Amplifier
- LED-VD1
- User Manual
NEC LED-VD1 User Manual - page 11
Summary of LED-VD1
Page 1
User's manual video distributor led-vd1.
Page 2: Index
Index declaration of conformity .......................................................................................................................... English-1 important information ....................................................................................................................
Page 3: Declaration of Conformity
English-1 declaration of conformity for usa fcc information 1. Use the attached specified cables with the led-vd1 (d000ld) video distributor so as not to interfere with radio and television reception. (1) please use the supplied power cord or equivalent to ensure fcc compliance. (2) please use a goo...
Page 4: Important Information
English-2 important information warning to prevent fire or shock hazards, do not expose this unit to rain or moisture. Also, do not use this unit’s polarized plug with an extension cord receptacle or other outlets unless the prongs can be fully inserted. Refrain from opening the cabinet as there are...
Page 5
English-3 safety precautions, maintenance & recommended use for optimum performance, please note the following when setting up and using the video distributor: • do not open the video distributor. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous s...
Page 6: Contents
English-4 contents the parts supplied with this unit are as follows. In the rare case that one of these parts is missing or damaged, contact the retailer. • power cord (1.8 m us) • power cord (1.8 m eu) • signal cable (dvi-d, 1.8 m) • usb/rs-485 adapter • lan cable (3 m) • utility disk • setup manua...
Page 7: Parts Name and Functions
English-5 parts name and functions front panel 1 2 3 4 5 6 7 8 out in rs- 4 8 5 power led display output dvi led-vd1 video distributor power led display output dvi 1 2 3 4 5 6 7 8 out in rs-485 1 2 3 4 5 1 power lamp lights up (red) when the power is on. 2 led display lamp the port connected to the ...
Page 8: Connections
English-6 connections connecting an external device • to protect the device, switch off the power before connecting it. • when connecting devices, follow the instructions in their user manuals. Connecting the power note : • connect the power cord to the unit before connecting it to the power outlet....
Page 9: Connection Methods
English-7 connection methods before connecting • before connecting to the device, turn off the power to the device you are connecting to and all peripheral devices. • refer to the user's manuals for those devices. Video processor [led-vp1] computer (usb/rs485 adapter) led module [led-06af1/led-15bf1...
Page 10: Installing Drivers
English-8 installing drivers 1. Compatible operating systems windows 2000 professional windows xp professional windows 2003 server windows vista windows 7 2. How to install connect the usb/rs-485 adapter to your pc after the drivers have successfully been installed. Insert the included cd-rom into y...
Page 11
English-9 (6) click [install]. (7) the success window will be displayed. [ok] click to complete the driver installation..
Page 12: Troubleshooting
English-10 troubleshooting check the following items. Problems/symptoms cause and solution cannot perform led module mapping the led module connector cable for this product must be connected using a dvi dual-link cable. Cannot perform command communication • the usb/rs-485 adapter will be detected a...
Page 13: Appendix
English-11 appendix specifications product name led-vd1 notes image input interface dvi-d compatible resolutions 1024x768 @60hz image output interface dvi-d (*1) for cascade connection of led-vd1 dvi-d (*2) (8 outputs) connect to the led module using a dual-link cable control interface rj-45 (*3) (i...
Page 14
English-12 dimensional drawing 479.2 90 98 .2 86 .1 10 .3 325.1 407 28 0 29 0. 5 unit: mm.
Page 15
English-13 manufacturer’s recycling and energy information nec display solutions is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentallyfriendl...