1. DL manuals
  2. NEC
  3. Racks & Stands
  4. LT30 - XGA DLP Projector
  5. Installation And Assembly Manual

NEC LT30 - XGA DLP Projector Installation And Assembly Manual

Other manuals for LT30 - XGA DLP Projector: Specifications, Control Commands
Manual is about: NP115 : RS232 codes- Projectors

Summary of LT30 - XGA DLP Projector

  • Page 1

    Issued: 10-13-05 sheet #: 055-9445-2 03-31-06 visit the peerless web site at www.Peerlessmounts.Com 1 of 7 for customer service call 1-800-729-0307 or 708-865-8870. Model: lt30cm installation and assembly - mount and adapter plate for nec™ lt30cm projector read instruction sheet before you start ins...

  • Page 2

    Issued: 10-13-05 sheet #: 055-9445-2 03-31-06 visit the peerless web site at www.Peerlessmounts.Com 2 of 7 for customer service call 1-800-729-0307 or 708-865-8870. G parts list before you start check the parts list to insure all of the parts shown are included. Aa cc dd bb b c a d f e aa adapter pl...

  • Page 3: Caution

    Issued: 10-13-05 sheet #: 055-9445-2 03-31-06 visit the peerless web site at www.Peerlessmounts.Com 3 of 7 for customer service call 1-800-729-0307 or 708-865-8870. Drill two 5/32" (4 mm) dia. Holes to a minimum depth of 2.5" (64 mm). Attach projector mount assembly (a) with two #14 x 2.5" (6 mm x 6...

  • Page 4: Caution

    Issued: 10-13-05 sheet #: 055-9445-2 03-31-06 visit the peerless web site at www.Peerlessmounts.Com 4 of 7 for customer service call 1-800-729-0307 or 708-865-8870. Drill two 1/4" (6 mm) dia. Holes to a minimum depth of 2.5" (64 mm). Attach projector mount assembly (a) using two concrete anchors (g)...

  • Page 5

    Issued: 10-13-05 sheet #: 055-9445-2 03-31-06 visit the peerless web site at www.Peerlessmounts.Com 5 of 7 for customer service call 1-800-729-0307 or 708-865-8870. 3/8 -16 threaded rod (not included) attach projector mount assembly (a) to two 3/8-16 threaded rods (not included) using two 3/8-16 hex...

  • Page 6

    Issued: 10-13-05 sheet #: 055-9445-2 03-31-06 visit the peerless web site at www.Peerlessmounts.Com 6 of 7 for customer service call 1-800-729-0307 or 708-865-8870. Flip projector upside down. Using holes indicated below, attach adapter plate (aa) to projector using two m4 x 12 mm screws (bb) using ...

  • Page 7

    Issued: 10-13-05 sheet #: 055-9445-2 03-31-06 visit the peerless web site at www.Peerlessmounts.Com 7 of 7 for customer service call 1-800-729-0307 or 708-865-8870. Slide connection block with projector into projector mount assembly (a) as shown. Tighten captive screw to secure projector to projecto...