NEC MultiSync S521 Installation Manual
NEC Display Solutions of America, Inc.
S521 Installation Guide
52” LCD Display
Rev 1.2
www.necdisplay.com
S521
Page 1 of 10
Contents:
Product Description and Notes
Page 1
Tilt Angle and Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top & Right Side
Page 3
Rear & Bottom
Page 4
Display Dimensions w/Optional Speakers and Stand
Page 5
Optional Table Top Stand Dimensions
Page 6
Optional Speaker Dimensions
Page 7
Dimensions with Optional Wall Mount
Page 8
Input Panels
Page 9
Control Codes
Page 10
Product Description
Type:
LCD Display
Screen Surface: Anti-Reflective
Resolution:
1920 x 1080
Dimensions without stand: 49.4”(W) x 29.6”(H) x 5.5”(D)
Aspect Ratio:
16:9
Dimensions with stand:
49.4”(W) x 31.0”(H) x 15.7”(D)
FCC:
Class B
Weight without stand:
79.4 lbs
Power Consumption:
290 W (typ)
Weight with stand:
84.2 lbs
BTU’s:
989.52 BTU/hour
NOTES:
•
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
•
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
•
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
•
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg